LLDPE，Braskem PE LHB-118/21AF对比LLDPE，Braskem PE LL5400S物性表,价格行情_搜料

牌号信息	Braskem PE LHB-118/21AF 物性表 LLDPE & 巴西布拉斯科指导价格：暂无塑料库存：缺货	Braskem PE LL5400S 物性表 LLDPE & 巴西布拉斯科指导价格：暂无塑料库存：缺货
牌号简介	LHB118/21 AF是一种由Braskem公司生产的LLDPE共聚物。它是一个现成的产品，因为它含有10%的低密度聚乙烯。它的添加剂包装进行了优化，以避免堵塞，即使在低厚度。从这一级别获得的薄膜显示出非常好的机械性能和密封性和加工性之间的良好平衡。非常低的凝胶量。添加剂：加工助剂中抗氧化剂中滑模中防堵高用途：冷冻袋；通用。 LHB118/21 AF is a LLDPE copolymer produced by Braskem. It is a ready-to-use product since it contains 10% LDPE. Its additive package was optimized to avoid blocking, even at low thickness. Film obtained from this grade show very good mechanical properties and a good balance between sealability and processability. Very low gel amount. Additive: Processing Aid Medium Antioxidants Medium Slip Medium Antiblocking High Applications: Frozen bags; general purpose. Process: Blown Film Extrusion	LL5400S是一种线性低密度聚乙烯，开发用于与聚乙烯混合的吹塑薄膜挤出。用该产品制备的薄膜具有良好的加工性能，具有良好的光学、机械性能和密封性。非常低的凝胶量。它含有抗氧化添加剂。用途：衬里；一般用途的低密度聚乙烯和高密度聚乙烯混合物和包装。其他应用：灌溉管道的混合物。工艺：薄膜挤出的推荐工艺条件约为170-210°C。最佳工艺条件将根据所用设备的类型而变化，不能作为性能保证。 LL5400S is a Linear Low Density Polyethylene developed for blown film extrusion in blends with polyethylenes. Films obtained with this product show a good processing performance balanced with good optical and mechanical properties as well as sealability. Very low gel amount. It contains antioxidant additives. Applications: Liners; LDPE and HDPE blends and packages for general use. Others applications: blends for irrigation pipes. Process: Recommended processing conditions for film extrusion about 170 - 210 °C. The optimum processing conditions will vary according to the type of equipment used and cannot be considered as performance guarantee.

产品描述
厂家：	巴西布拉斯科 Braskem	巴西布拉斯科 Braskem
类别：	LLDPE Linear low density polyethylene	LLDPE Linear low density polyethylene
填料：
用途：	薄膜,通用,包装	混合,衬里,薄膜,管道系统,吹膜,包装
性能特点：	易加工,抗结块性,低速凝固晶点,食品接触,抗氧化,低密度,共聚物 Excellent Processability,High anti-blocking,Low speed solidification point,Food contact compliance,Inoxidizability,Low density,Copolymer	易加工,光学性能,低速凝固晶点,抗氧化 Excellent Processability,Optical performance,Low speed solidification point,Inoxidizability
加工条件：	挤出吹塑成型	吹塑薄膜