3M™ Dyneon™ Fluoroelastomer FLS 2530
氟橡胶 & 美国3M
Boda BDF631P
氟橡胶 & 成都晨光博达
牌号信息 |
氟橡胶 & 美国3M 指导价格:暂无 塑料库存: 缺货 |
氟橡胶 & 成都晨光博达 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
特点和优点组成:偏氟乙烯和六氟丙烯的二元聚合物中粘度工艺目标:注射、传递成型和压延与低氟聚合物相比提高了耐化学性与优良的压缩永久变形性与低氟聚合物的性能瑞公司固化技术 Features and Benefits Composition: di-polymer of vinylidene fluoride and hexafluoropropylene Medium viscosity Process targets: injection and transfer molding and calendering Improved chemical resistance compared to lower percent fluorine fluoropolymers Excellent compression set resistance compared to lower percent fluorine fluoropolymers Proprietary incorporated cure technology |
BDF631P是中高粘度固化型含氟弹性体共聚物。该等级非常适合需要良好的抗撕裂性和良好的脱模性的应用。BDF631P可以复合以满足主要的氟橡胶规格。BDF631P可用于油封的压缩成型或复杂的几何结构。它可以使用典型的氟弹性体配合剂进行混合。混合可以通过两个辊磨机或内部搅拌机完成。制成品可采用多种橡胶加工方法生产。 BDF631P is a medium to high viscosity curative incorporated fluoroelastomer copolymer. This grade is well suited for application where good hot tear resistance and excellent mold release are required. BDF631P can be compounded to meet the major fluoroelastomer specifications. BDF631P can be used for compression molding of oil seals or complicated geometries. It can be mixed using typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Finished goods can be produced by a variety of rubber processing methods. |
|
产品描述 | |||
厂家: | 美国3M | 成都晨光博达 Fluoro | |
类别: | 氟橡胶 氟橡胶 | 氟橡胶 氟橡胶 | |
填料: | |||
用途: | 混料 | 复合,密封件 | |
性能特点: | 良好的压缩永久变形,共聚物 Good Compression Set,Copolymer | 含脱模剂,机械强度好-撕裂,共聚物 Good stripping performance,Good tear strength,Copolymer | |
加工条件: | 树脂传递成型 | 复合 |
备注 |
1 一般属性:这些不能被视为规格。
2 Press Time: 10 min, Press Temperature: 170°C, Post Cure Time: 24 hr, Post Cure Temperature: 230°C
3 MDR2000 Rheometer, 100cpm, 0.5° Arc, 6 minutes
|
价格走势对比图
氟橡胶 3M™ Dyneon™ Fluoroelastomer FLS 2530
氟橡胶 Boda BDF631P
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交