PCTG，Eastar™ EN067, Natural对比 PCTG，Eastar™ MN021 Natural物性表,价格行情_搜料

牌号信息	Eastar™ EN067, Natural 物性表 PCTG & 美国伊士曼指导价格：暂无塑料库存：缺货	Eastar™ MN021 Natural 物性表 PCTG & 美国伊士曼指导价格：暂无塑料库存：缺货
牌号简介	EASTER共聚酯EN067是一种颜色优良的共聚聚酯。该产品作为一种结晶颗粒提供，具有改进的流动性特征。由于结晶动力学较慢，该产品能够在注射成型时产生无结晶雾的部分。本产品已通过绿色卫士室内空气质量认证。Greenguard室内空气质量认证标志是通过Greenguard环境研究所（GEI）许可使用的注册认证标志。GEI是一个行业独立的非盈利组织，负责监督Greenguard认证计划。Greenguard认证计划是一个行业独立的第三方测试计划，用于室内环境的低排放产品和材料。欲了解更多关于GEI的信息，并获得Eastman共聚酯的可打印证书，请访问www.greenguard.org。在制造商类别下选择Eastman Chemical Company，然后单击搜索以显示我们的产品列表。 Eastar™ Copolyester EN067 is a copolymer PET with good color. This product is supplied as a crystalline pellet that has improved flowability characteristics. Due to slower crystallization kinetics, this product is capable of producing a part free of crystalline haze upon injection molding. This product is tailored for the injection-molded cosmetics and personal care market. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products	Eastar共聚酯MN021 Natural经过FDA/ISO 10993和USP六级生物评估测试，在γ和ETO灭菌后进行测试。它是一种热塑性缩聚共聚物，由连续熔融相聚合工艺和随后的固态聚合工艺制成。它已结晶。本产品已通过绿色卫士室内空气质量认证。Greenguard室内空气质量认证标志是通过Greenguard环境研究所（GEI）许可使用的注册认证标志。GEI是一个行业独立的非盈利组织，负责监督Greenguard认证计划。Greenguard认证计划是一个行业独立的第三方测试计划，用于室内环境的低排放产品和材料。欲了解更多关于GEI的信息，并获得Eastman共聚酯的可打印证书，请访问www.greenguard.org。在制造商类别下选择Eastman Chemical Company，然后单击搜索以显示我们的产品列表。 Eastar™ Copolyester MN021 Natural has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ copolyester MN021 Natural is a thermoplastic condensation copolymer produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. It has a relatively high flex modulus and yield strength. This product does not contain a mold release. It is a thermoplastic condensation copolymer produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. It has been crystallized. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.

产品描述
厂家：	美国伊士曼 Eastman	美国伊士曼 Eastman
类别：	PCTG PCTG	PCTG PCTG
填料：
用途：	包装,文具,个人护理,化妆品包装,瓶子,牙刷柄,体育用品,玩具	实验室器具,医疗/护理用品
性能特点：	易流动,结晶,共聚物,着色性好 Good liquidity,Crystal,Copolymer,Good coloring	结晶,电子束消毒,颜色稳定,辐射消毒,共聚物,耐化学性 Crystal,E-beam disinfection,Good color stability,Radiation disinfection,Copolymer,Solvent resistance
加工条件：	注射成型 Injection Molding	注射成型 Injection Molding

技术参数

物理性能
PHYSICAL Eastar™ EN067, Natural Eastar™ MN021 Natural 单位
UNIT 测试方法
TEST METHOD

密度
Density g/cm³ ASTM D792

收缩率(MD：3.2 mm)
Shrinkage rate % ASTM D955

冲击性能
IMPACT Eastar™ EN067, Natural Eastar™ MN021 Natural 单位
UNIT 测试方法
TEST METHOD

悬臂梁缺口冲击强度(-20℃)
Impact strength of cantilever beam notch ASTM D4218

悬臂梁缺口冲击强度(-30℃)
Impact strength of cantilever beam notch ASTM D4218

悬臂梁缺口冲击强度(-40℃)
Impact strength of cantilever beam notch J/m ASTM D256

悬臂梁缺口冲击强度(-40℃)
Impact strength of cantilever beam notch ASTM D4218

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch J/m ASTM D256

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch ASTM D4218

装有测量仪表的落镖冲击(-40℃，2.50 mm，Energy at Peak Load)
Dart impact equipped with measuring instruments J ASTM D3763

装有测量仪表的落镖冲击(-40℃，3.20 mm，Energy at Peak Load)
Dart impact equipped with measuring instruments J ASTM D3763

装有测量仪表的落镖冲击(23℃，2.50 mm，Energy at Peak Load)
Dart impact equipped with measuring instruments J ASTM D3763

装有测量仪表的落镖冲击(23℃，3.20 mm，Energy at Peak Load)
Dart impact equipped with measuring instruments J ASTM D3763

热性能
THERMAL Eastar™ EN067, Natural Eastar™ MN021 Natural 单位
UNIT 测试方法
TEST METHOD

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

热变形温度(1.8 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

光学性能
OPTICAL Eastar™ EN067, Natural Eastar™ MN021 Natural 单位
UNIT 测试方法
TEST METHOD

透光率(Regular)
Transmittance % ASTM D1003

透光率(总计)
Transmittance % ASTM D1003

雾度
Haze % ASTM D1003

机械性能
MECHANICAL Eastar™ EN067, Natural Eastar™ MN021 Natural 单位
UNIT 测试方法
TEST METHOD

弯曲强度(23℃)
bending strength MPa ASTM D790

弯曲强度(屈服，23℃)
bending strength MPa ASTM D790

弯曲模量(23℃)
Bending modulus MPa ASTM D790

拉伸应变(屈服，23℃)
Tensile strain % ASTM D638

拉伸应变(断裂，23℃)
Tensile strain % ASTM D638

拉伸强度(屈服，23℃)
tensile strength MPa ASTM D638

拉伸强度(断裂，23℃)
tensile strength MPa ASTM D638

拉伸模量(23℃)
Tensile modulus MPa ASTM D638

洛氏硬度(R 级)
Rockwell hardness ASTM D785

加工方式

注射 Eastar™ EN067, Natural Eastar™ MN021 Natural 单位测试方法

加工熔体温度 °C

干燥时间 hr

干燥温度 °C

模具温度 °C

备注

1 一般属性：这些不能被视为规格。


相关资讯

牌号简介
产品描述
技术参数
物理性能
冲击性能
热性能
光学性能
机械性能
加工方式
注射
备注
返回顶部

PCTG，Eastar™ EN067, Natural对比 PCTG，Eastar™ MN021 Natural对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别