公司信息及水印
牌号简介 About |
---|
Eastar共聚酯MN021 Natural经过FDA/ISO 10993和USP六级生物评估测试,在γ和ETO灭菌后进行测试。它是一种热塑性缩聚共聚物,由连续熔融相聚合工艺和随后的固态聚合工艺制成。它已结晶。本产品已通过绿色卫士室内空气质量认证。Greenguard室内空气质量认证标志是通过Greenguard环境研究所(GEI)许可使用的注册认证标志。GEI是一个行业独立的非盈利组织,负责监督Greenguard认证计划。Greenguard认证计划是一个行业独立的第三方测试计划,用于室内环境的低排放产品和材料。欲了解更多关于GEI的信息,并获得Eastman共聚酯的可打印证书,请访问www.greenguard.org。在制造商类别下选择Eastman Chemical Company,然后单击搜索以显示我们的产品列表。 Eastar™ Copolyester MN021 Natural has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and EtO sterilization. Eastar™ copolyester MN021 Natural is a thermoplastic condensation copolymer produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. It has a relatively high flex modulus and yield strength. This product does not contain a mold release. It is a thermoplastic condensation copolymer produced by a continuous melt-phase polymerization process followed by a solid-state polymerization process. It has been crystallized. This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.33 | g/cm³ | ASTM D792 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D256 | ||
-40℃ -40℃ |
27 | J/m | ASTM D256 |
23℃ 23℃ |
40 | J/m | ASTM D256 |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ASTM D4218 | ||
-40℃ -40℃ |
No Break | ASTM D4218 | |
-30℃ -30℃ |
No Break | ASTM D4218 | |
-20℃ -20℃ |
ASTM D4218 | ||
23℃ 23℃ |
ASTM D4218 | ||
装有测量仪表的落镖冲击 Dart impact equipped with measuring instruments |
ASTM D3763 | ||
-40℃,2.50 mm,Energy at Peak Load -40℃,2.50 mm,Energy at Peak Load |
J | ASTM D3763 | |
-40℃,3.20 mm,Energy at Peak Load -40℃,3.20 mm,Energy at Peak Load |
J | ASTM D3763 | |
23℃,2.50 mm,Energy at Peak Load 23℃,2.50 mm,Energy at Peak Load |
J | ASTM D3763 | |
23℃,3.20 mm,Energy at Peak Load 23℃,3.20 mm,Energy at Peak Load |
J | ASTM D3763 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
透光率 Transmittance |
|||
总计 total |
% | ASTM D1003 | |
雾度 Haze |
% | ASTM D1003 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
23℃ 23℃ |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
断裂,23℃ Fracture, 23 ℃ |
MPa | ASTM D638 | |
屈服,23℃ Yield, 23 ℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
屈服,23℃ Yield, 23 ℃ |
MPa | ASTM D790 | |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
巴斯夫与上下游伙伴携手成立“可持续发展共建联盟”
2021-10-24 搜料网资讯: 2021年10月19日,由巴斯夫倡议,携手价值链上下游伙伴共同创建的可持续发展共建联盟(Sustainability Covalence)正式成立。该联盟旨在聚拢产业链合作方,推动各个关键行业 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |