3D打印材料，3SP™ E-Denstone Peach对比3D打印材料，Perfactory® E-Denstone物性表,价格行情_搜料

牌号信息	3SP™ E-Denstone Peach 物性表 3D打印材料 & 美国EnvisionTEC 指导价格：暂无塑料库存：缺货	Perfactory® E-Denstone 物性表 3D打印材料 & 美国EnvisionTEC 指导价格：暂无塑料库存：缺货
牌号简介	enVisiontec的e-denstone 3sp材料是为模型制造而开发的。桃红色为造型提供了一个吸引人的选择，在外观和感觉上与牙科实验室常用的模具石相似。它可以与传统的牙科制造方法一起使用，也可以作为任何MCAD应用的基于CAD的模型解决方案。低粘度配方与高精度enVisiontec 3sp打印机相结合，有助于在不丢失细节的情况下产生卓越的效果。E-Denstone 3SPIS也足够坚固，能够检查形状和配合，不会造成配合损失或接触面过度磨损。清洁过程中不使用会导致变形且只需几分钟的脏油或热量。最大的优点是它的快速构建时间，即使在z中以35微米的分辨率运行。这意味着高度详细的精确模型的快速周转。应用牙科，MCAD推荐机器：超3sp，超3sp HD，3-dent，超3sp Ortho EnvisionTEC's E-Denstone 3SP™ Material was developed for model manufacturing. The peach color provides an attractive choice for modeling that is similar in look and feel to common die stones used in dental labs. It can be used with traditional dental manufacturing methods or as a CAD based model solution for any MCAD application. The low viscosity formula combined with high accuracy EnvisionTEC 3SP™ printers helps to produce superior results with no loss of detail. E-Denstone 3SP™is also tough enough to check form and fit without any loss of fit or causing excessive wear on the contact surfaces. The cleanup does not use messy oils or heat that can cause distortion and takes only minutes. The biggest advantage is its fast build time, even running with 35 micron resolution in Z. This means fast turnaround of highly detailed accurate models. Applications Dental, MCAD Recommended Machines: ULTRA® 3SP™, ULTRA® 3SP™ HD, 3-Dent®, ULTRA® 3SP™ Ortho	enVisiontec的E-denstone材料是为牙科模型制造而开发的。桃红色为造型提供了一个吸引人的选择，在外观和感觉上与实验室常用的模具石相似。它可以与传统的牙科制造方法一起使用，也可以作为基于CAD的模型解决方案。这是唯一的材料，让你很容易模具修剪，边缘标记用红色铅笔和手蜡模具，而不关心层线。模具油漆就像石膏一样粘在模具上，不会剥落。这种材料看起来和感觉都像传统的石膏模型，它超越了目前市场上其他树脂基模型。低粘度配方与高精度打印机相结合，有助于在不丢失解剖细节的情况下产生卓越的效果。E-Denstone也足够坚固，牙科技术人员可以反复拆卸和更换牙板，检查咬合情况，并在移动过程中不会失去配合或导致接触面过度磨损。清洁过程不使用会导致变形的脏油或热量，只需3分钟。最大的优势是它的建造时间-惊人的平均建造时间低于2.5小时，有一个完整的皇冠和桥梁模型平台。所有这些都在z中具有35微米的分辨率。这意味着实验室能够在8小时的轮班时间内完成几次构建，从而能够快速周转高度详细的精确模型。无人值守的生产意味着机器可以在您不在时工作。它甚至会在完成一个构建后关闭自己。应用牙科推荐机器：Perfectory 4 DDP4系列，Pixera EnvisionTEC's E-Denstone Material was developed for dental model manufacturing. The peach color provides an attractive choice for modeling that is similar in look and feel to common die stones used in labs. It can be used with traditional dental manufacturing methods or as a CAD based model solution. This is the only material that allows you to easily die trim, margin mark with a red pencil and hand wax to the die without concerns for layer lines. Die paint sticks to the dies just like plaster and won't peel off. The material looks and feels like traditional gypsum models, which sets it above the other resin-based models currently on the market. The low viscosity formula combined with high accuracy printers helps to produce superior results with no loss of anatomy detail. E-Denstone is also tough enough for a dental technician to repeatedly remove and replace the die, check occlusion and move through excursions without any loss of fit or causing excessive wear on the contact surfaces. The cleanup does not use messy oils or heat that can cause distortion and takes only 3 minutes. The biggest advantage is its build time - a staggering average build time of under 2.5 hours with a full platform of crown and bridge models. All this with 35 micron resolution in Z. This means the lab is able to complete several builds in an 8 hour shift, allowing for fast turnaround of highly detailed accurate models. Unattended production means the machine can work while you are away. It will even turn itself off after completing a build. Applications Dental Recommended Machines: Perfactory® 4 DDP4 Series, PixCera

产品描述
厂家：	美国EnvisionTEC	美国EnvisionTEC
类别：	3D打印材料 3D打印材料	3D打印材料 3D打印材料
填料：
用途：	成型材料,牙齿应用领域	成型,成型材料,牙齿应用领域
性能特点：	表面光泽度好,低粘度 Good surface appearance,Low Viscosity	表面光泽度好,低粘度,可表面喷涂,耐磨 Good surface appearance,Low Viscosity,Sprayable,Good wear resistance
加工条件：	立体光刻	立体光刻

技术参数

机械性能
MECHANICAL 3SP™ E-Denstone Peach Perfactory® E-Denstone 单位
UNIT 测试方法
TEST METHOD

弯曲强度
bending strength MPa

弯曲模量
Bending modulus MPa

拉伸应变(断裂)
Tensile strain %

拉伸强度
tensile strength MPa

热性能
THERMAL 3SP™ E-Denstone Peach Perfactory® E-Denstone 单位
UNIT 测试方法
TEST METHOD

热变形温度
Hot deformation temperature ℃

备注

1 一般属性：这些不能被视为规格。


相关资讯

牌号简介
产品描述
技术参数
机械性能
热性能
加工方式
备注
返回顶部

3D打印材料，3SP™ E-Denstone Peach对比3D打印材料，Perfactory® E-Denstone对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别