公司信息及水印
牌号简介 About |
---|
enVisiontec的E-denstone材料是为牙科模型制造而开发的。桃红色为造型提供了一个吸引人的选择,在外观和感觉上与实验室常用的模具石相似。它可以与传统的牙科制造方法一起使用,也可以作为基于CAD的模型解决方案。这是唯一的材料,让你很容易模具修剪,边缘标记用红色铅笔和手蜡模具,而不关心层线。模具油漆就像石膏一样粘在模具上,不会剥落。这种材料看起来和感觉都像传统的石膏模型,它超越了目前市场上其他树脂基模型。低粘度配方与高精度打印机相结合,有助于在不丢失解剖细节的情况下产生卓越的效果。E-Denstone也足够坚固,牙科技术人员可以反复拆卸和更换牙板,检查咬合情况,并在移动过程中不会失去配合或导致接触面过度磨损。清洁过程不使用会导致变形的脏油或热量,只需3分钟。最大的优势是它的建造时间-惊人的平均建造时间低于2.5小时,有一个完整的皇冠和桥梁模型平台。所有这些都在z中具有35微米的分辨率。这意味着实验室能够在8小时的轮班时间内完成几次构建,从而能够快速周转高度详细的精确模型。无人值守的生产意味着机器可以在您不在时工作。它甚至会在完成一个构建后关闭自己。应用牙科推荐机器:Perfectory 4 DDP4系列,Pixera EnvisionTEC's E-Denstone Material was developed for dental model manufacturing. The peach color provides an attractive choice for modeling that is similar in look and feel to common die stones used in labs. It can be used with traditional dental manufacturing methods or as a CAD based model solution. This is the only material that allows you to easily die trim, margin mark with a red pencil and hand wax to the die without concerns for layer lines. Die paint sticks to the dies just like plaster and won't peel off. The material looks and feels like traditional gypsum models, which sets it above the other resin-based models currently on the market. The low viscosity formula combined with high accuracy printers helps to produce superior results with no loss of anatomy detail. E-Denstone is also tough enough for a dental technician to repeatedly remove and replace the die, check occlusion and move through excursions without any loss of fit or causing excessive wear on the contact surfaces. The cleanup does not use messy oils or heat that can cause distortion and takes only 3 minutes. The biggest advantage is its build time - a staggering average build time of under 2.5 hours with a full platform of crown and bridge models. All this with 35 micron resolution in Z. This means the lab is able to complete several builds in an 8 hour shift, allowing for fast turnaround of highly detailed accurate models. Unattended production means the machine can work while you are away. It will even turn itself off after completing a build. Applications Dental Recommended Machines: Perfactory® 4 DDP4 Series, PixCera |
技术参数 Technical Data | |||
---|---|---|---|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
56.0 | MPa | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
3.5 | % | |
弯曲模量 Bending modulus |
3350 | MPa | |
弯曲强度 bending strength |
115 | MPa | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
140 | ℃ |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
外媒:继拜登后,美国商务部也撤销针对TikTok和WeChat禁令
2021-06-22 搜料网资讯: 据路透社报道,当地时间6月21日,美国商务部表示,撤销去年9月特朗普政府时期发布的针对中国社交媒体应用TikTok和WeChat的禁令。 根据美国媒体此前的报道,当地时间6月 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |