乙烯基酯，Vipel® F010-CNM-00对比乙烯基酯，Vipel® F010-H2O-00物性表,价格行情_搜料

牌号信息	Vipel® F010-CNM-00 物性表乙烯基酯 & 美国AOC 指导价格：暂无塑料库存：缺货	Vipel® F010-H2O-00 物性表乙烯基酯 & 美国AOC 指导价格：暂无塑料库存：缺货
牌号简介	AOC的VipelF010系列是一种溶于苯乙烯的双酚A环氧乙烯基酯树脂。VIPEL F010系列非常适合用于手工铺层、喷涂、纤维缠绕、SMC和拉挤成型工艺，其中突出的机械性能和优异的耐化学品和耐热性是必需的。优点：多功能宽配方设计功能可用于许多流程，并可优化成本/性能。独特的组成产生了一个坚韧和多用途的树脂，具有优异的裂缝和耐开裂性的模件。Vipel F010适用于承受特别高静态或动态载荷的模具，如管道、水箱、管道工程和地板应用。乙烯基酯树脂具有优异的耐热性。耐腐蚀性强的VipelF010对过氧化氢和碱有很高的抵抗力，在次氯酸盐和氯气生产的各个阶段表现良好。请参阅AOC的“耐腐蚀树脂指南”，了解耐腐蚀信息或有关树脂适用于任何特定化学环境的问题，请联系AOC。 AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required. BENEFITS Versatile Wide formulating capabilities allow for use in many processes and for optimization of cost/performance. Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts. Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat. Corrosion Resistance Vipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.	f010-h2o-00饮用水涂层系统NSF/ANSI 61认证Vipel® F010-H2O-00通过NSF/ANSI 61认证，用于商用和家用饮用水系统，作为保护屏障材料。如果制造商遵循第3页列出的成分和工艺说明，他们不需要进行额外的测试来制造符合NSF/ANSI 61标准的涂层。适用于次氯酸钠安全壳的优点Vipel® F010-H2O-00的配方也适用于次氯酸钠（氯漂白剂）安全壳。次氯酸钠是一种广泛接受的净水化学物质，对大多数金属和许多聚合物材料都具有很强的腐蚀性。使用不适用于次氯酸钠安全壳的涂料会缩短设备的使用寿命。 F010-H2O-00 Coating System for Potable Water POTABLE WATER NSF/ANSI 61 Certified Vipel F010-H2O-00 is certified to NSF/ANSI 61 for use in commercial and domestic potable water systems as a protective barrier material. If fabricators follow the ingredients and process instructions listed on page 3, they do not need to perform additional testing to manufacture a NSF/ANSI 61 compliant coating. BENEFITS Suitable for Sodium Hypochlorite Containment The formulation of Vipel F010-H2O-00 is also appropriate and suitable for sodium hypochlorite (chlorine bleach) containment. Sodium hypochlorite is a widely accepted water purification chemical that is very aggressive to most metals and many polymeric materials. The use of coatings that are not formulated for sodium hypochlorite containment will reduced the service life of the equipment.

产品描述
厂家：	美国AOC	美国AOC
类别：	乙烯基酯乙烯基酯	乙烯基酯乙烯基酯
填料：
用途：	管道系统,水箱,地板材料	饮用水应用,管线涂料,涂层应用
性能特点：	韧性好,耐碱,耐腐蚀,耐高温,机械强度好-撕裂,耐化学性,抗应力开裂 Good flexibility,Alkali resistant,Corrosion Resistant,High Heat Resistance,Good tear strength,Solvent resistance,High ESCR	耐碱 Alkali resistant
加工条件：	手工涂敷

技术参数

物理性能
PHYSICAL Vipel® F010-CNM-00 Vipel® F010-H2O-00 单位
UNIT 测试方法
TEST METHOD

苯乙烯含量
styrene content %

热性能
THERMAL Vipel® F010-CNM-00 Vipel® F010-H2O-00 单位
UNIT 测试方法
TEST METHOD

热变形温度(1.8 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

玻璃化转变温度
Glass transition temperature ℃ DIN 53445

电气性能
ELECTRICAL Vipel® F010-CNM-00 Vipel® F010-H2O-00 单位
UNIT 测试方法
TEST METHOD

介电常数(1 kHz)
Dielectric constant DIN 53483

介电常数(1 MHz)
Dielectric constant DIN 53483

介电常数(60 Hz)
Dielectric constant DIN 53483

介电强度(0.7 mm)
Dielectric strength kV/mm DIN 53481

体积电阻率
Volume resistivity ohms·cm DIN 53482

耗散因数(1 kHz)
Dissipation factor DIN 53483

耗散因数(1 MHz)
Dissipation factor DIN 53483

耗散因数(60 Hz)
Dissipation factor DIN 53483

表面电阻率
Surface resistivity ohms DIN 53482

补充信息
Vipel® F010-CNM-00 Vipel® F010-H2O-00 单位
UNIT 测试方法
TEST METHOD

Critical Strain Energy
Critical Strain Energy J/m² ASTM E399

Gel to Peak
Gel to Peak min

Stress Intensity Factor
Stress Intensity Factor ASTM E399

放热峰值
exothermic peak ℃

Uncured Properties
Vipel® F010-CNM-00 Vipel® F010-H2O-00 单位
UNIT 测试方法
TEST METHOD

密度
Density g/cm³

粘度(布络克菲尔德 RVT，25℃)
viscosity Pa·s

胶凝时间(25℃)
Gelation time min

机械性能
MECHANICAL Vipel® F010-CNM-00 Vipel® F010-H2O-00 单位
UNIT 测试方法
TEST METHOD

压缩强度
compressive strength MPa ASTM D695

巴氏硬度
Babbitt hardness ASTM D2583

弯曲强度
bending strength MPa ASTM D790

弯曲模量
Bending modulus MPa ASTM D790

拉伸应变(断裂)
Tensile strain % ASTM D638

拉伸强度
tensile strength MPa ASTM D638

拉伸模量
Tensile modulus MPa ASTM D638

备注

1 一般属性：这些不能被视为规格。

2 after 24 hrs in drinking water

3 Dry

1 一般属性：这些不能被视为规格。

2 after 24 hrs in drinking water

3 Dry


相关资讯

牌号简介
产品描述
技术参数
物理性能
热性能
电气性能
补充信息
Uncured Properties
机械性能
加工方式
备注
返回顶部

乙烯基酯，Vipel® F010-CNM-00对比乙烯基酯，Vipel® F010-H2O-00对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别