牌号简介 About |
---|
TECNOFLON® PL 855是新一代低温过氧化物可硫化、中等粘度含氟弹性体,含氟重量为64%。 TECNOFLON ®PL 855具有优异的低温韧性(TR10= -30°C)。与所有其它Tecnoflon过氧化物可硫化牌号一样,该材料具有优异的加工性能,而且,所需的后固化周期很短。 Tecnoflon PL 855的一些基本特性: - 杰出的低温韧性 低后固化率 优异的模内流动性 不会造成模内结垢 优异的脱模性能 Tecnoflon® PL855 可用于注塑、注塑-模压和传递模塑成型O型环、垫圈及密封件。 Tecnoflon® PL 855可以与固化系统和其它常规含氟弹性体配混材料混合。混合机械可用双辊研磨机或密炼机。这种材料可以挤塑成软管或型材,也可压延成片材或带材。 成品可采用各种橡胶加工方法制备。 TECNOFLON® PL 855 is a new generation low temperature peroxide curable medium viscosity fluoroelastomer with 64% wt fluorine content. Tecnoflon® PL 855 exhibits excellent low temperature flexibility (TR10 = -30°C). Like all other Tecnoflon® peroxide curable grades, it exhibits excellent processability; moreover it needs very short post-curing cycles. Some of the basic properties of Tecnoflon® PL 855 are: Excellent low temperature flexibility Low post cure Superior mold flow Lack of mold fouling Excellent mold release Tecnoflon® PL 855 can be used for injection, injection-compression and transfer molding of O-rings, gaskets and seals. Tecnoflon® PL 855 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
门尼粘度 Mooney viscosity 2 |
|||
ML 1+10,121℃ ML 1+10,121℃ 2 |
54 | MU | |
氟含量 Fluorine content 2 |
64 | % |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 聚合物原料 |
【新闻资讯】查看全部
中科炼化丁二烯装置综合能耗最低,但产量提高
2022-05-24 中科炼化持续开展对标提升竞赛,不断优化生产操作,降低装置能耗,提高各装置运行水平。4月,中科炼化丁二烯装置综合能耗为208.55千克标油/吨,比系统内同类装置的能耗平均水平 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |