Tecnoflon® PL 855
氟橡胶 & 比利时索尔维
Cri-Line FDA-615-65-THK
氟橡胶 & 美国Cri-Tech
牌号信息 |
氟橡胶 & 比利时索尔维 指导价格:暂无 塑料库存: 缺货 |
氟橡胶 & 美国Cri-Tech 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
TECNOFLON® PL 855是新一代低温过氧化物可硫化、中等粘度含氟弹性体,含氟重量为64%。 TECNOFLON ®PL 855具有优异的低温韧性(TR10= -30°C)。与所有其它Tecnoflon过氧化物可硫化牌号一样,该材料具有优异的加工性能,而且,所需的后固化周期很短。 Tecnoflon PL 855的一些基本特性: - 杰出的低温韧性 低后固化率 优异的模内流动性 不会造成模内结垢 优异的脱模性能 Tecnoflon® PL855 可用于注塑、注塑-模压和传递模塑成型O型环、垫圈及密封件。 Tecnoflon® PL 855可以与固化系统和其它常规含氟弹性体配混材料混合。混合机械可用双辊研磨机或密炼机。这种材料可以挤塑成软管或型材,也可压延成片材或带材。 成品可采用各种橡胶加工方法制备。 TECNOFLON® PL 855 is a new generation low temperature peroxide curable medium viscosity fluoroelastomer with 64% wt fluorine content. Tecnoflon® PL 855 exhibits excellent low temperature flexibility (TR10 = -30°C). Like all other Tecnoflon® peroxide curable grades, it exhibits excellent processability; moreover it needs very short post-curing cycles. Some of the basic properties of Tecnoflon® PL 855 are: Excellent low temperature flexibility Low post cure Superior mold flow Lack of mold fouling Excellent mold release Tecnoflon® PL 855 can be used for injection, injection-compression and transfer molding of O-rings, gaskets and seals. Tecnoflon® PL 855 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods. |
66%氟共聚物,采用批准用于食品接触的复合成分配制(列出美国FDA 21 CFR 177.2600(c)(4)(1))。FDA化合物也有多种颜色。 66% Fluorine copolymers formulated with compounding ingredients approved for food contact (U.S. FDA 21 CFR 177.2600(c)(4)(1) listed). FDA compounds are also available in a variety of colors. |
|
产品描述 | |||
厂家: | 比利时索尔维 Solvay | 美国Cri-Tech | |
类别: | 氟橡胶 氟橡胶 | 氟橡胶 氟橡胶 | |
填料: | |||
用途: | 型材,传送带修补,垫圈,低温应用,片材,管道,混合,密封件 | ||
性能特点: | 易加工,易流动,含脱模剂,耐低温柔性,快速固化 Excellent Processability,Good liquidity,Good stripping performance,Low temperature toughness,Fast Cure | 食品接触,共聚物 Food contact compliance,Copolymer | |
加工条件: | 压延 |
备注 |
1 一般属性:这些不能被视为规格。
2 聚合物原料
|
1 一般属性:这些不能被视为规格。
|
价格走势对比图
氟橡胶 Tecnoflon® PL 855
氟橡胶 Cri-Line FDA-615-65-THK
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交