牌号简介 About |
---|
具有优良机械性能的热塑性聚酯聚氨酯弹性体。优异的拉伸强度和断裂伸长率,良好的阻尼特性,高回弹性能和很好的耐磨性。典型应用:螺旋管、气动管、圆带、技术造型,如衬套、防尘盖、密封件、接头、吹塑波纹管、风扇皮带。圆带挤压质量 Thermoplastic Polyester Polyurethane Elastomers with excellent mechanical properties. Outstanding tensile strength and high elongation at break, good damping characteristics, a high resilience performance and very good wear resistance. Typical applications Spiral tubing, pneumatic tubing, round belting, technical mouldings e.g. bushes, dust caps, seals, joints, blow moulded bellows, fan belts. Extrusion quality for round belts |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.19 | g/cm³ | ISO 1183/A |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
ISO 7619 | ||
邵氏 A,3 秒 Shore A, 3 seconds |
88 | ISO 7619 | |
邵氏 D,3 秒 Shore D, 3 seconds |
37 | ISO 7619 | |
磨损量 Wear amount |
30.0 | mm³ | ISO 4649-A |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
DIN 53504 | ||
300% 应变 300% strain |
13.0 | MPa | DIN 53504 |
20% 应变 20% strain |
MPa | DIN 53504 | |
100% 应变 100% strain |
MPa | DIN 53504 | |
屈服 yield |
MPa | DIN 53504 | |
屈服 yield |
MPa | DIN 53504 | |
拉伸应变 Tensile strain |
DIN 53504 | ||
断裂 fracture 2 |
% | DIN 53504 | |
断裂 fracture |
% | DIN 53504 | |
撕裂强度 tear strength 3 |
kN/m | ISO 34-1 | |
压缩形变 Compression deformation |
ISO 815 | ||
23℃,72 hr 23℃,72 hr |
% | ISO 815 | |
70℃,24 hr 70℃,24 hr |
% | ISO 815 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
ISO 179 | ||
-30℃ -30℃ |
ISO 179 | ||
23℃ 23℃ |
ISO 179 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 after storage in water for 21 days at 80°C |
3 B 方法,直角形试样(割口) |
【新闻资讯】查看全部
河南出台煤炭消费替代管理办法
2021-11-24 搜料网资讯: 为确保完成能耗双控和煤炭消费总量控制目标,《河南省耗煤项目煤炭消费替代管理办法》(2021年修订)近日印发,对焦化、化工等行业煤炭替代核算方法、煤炭替代实施、 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |