物性表自定义
公司信息及水印
公司信息及水印
下载中文物性表
下载英文物性表
下载原厂物性表
邮件发送/他人
| 牌号简介 About |
|---|
| Bormed™ HE2581-PH是一种用于医疗应用评估的树脂。Bormed™ HE2581-PH是一种双峰高密度聚乙烯，通常用于吹塑10升以下的物品。材料的特点是易于加工和产品具有很高的刚度和很好的环境应力抗裂性（ESCR）。这种材料也可以用于使用IBM技术生产的容器。材料可以用环氧乙烷、蒸汽和辐射灭菌至35千克；由于辐射灭菌，可能会出现一些轻微的黄变。 Bormed HE2581-PH is a resin intended for evaluation for use in Healthcare applications. Bormed HE2581-PH-03 is a bimodal high density polyethylene typically used for blow moulding of articles up to 10 litres. Material is characterised by easy processing and products with high stiffness and very good environmental stress crack resistance (ESCR). Material can also be used for containers produced with IBM technology. Material can be sterilised with ethylene oxide, steam and radiation up till 35 kGy; as a result of sterilisation by radiation some minor yellowing can occur. Applications Bormed HE2581-PH has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed HE2581-PH . Bottles and containers for tablets Bottles for IV-solutions Bottles and containers for powder Bottles for irrigation solutions Bottles and containers for granules Containers for fine chemicals or APIs This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure. Special Features Easy processing High ESCR Low extractables |
产品描述 Product Description
用途：医疗/护理用品;容器;瓶子;药品包装;
加工条件：挤出 Extrusion
性能特点： 可回收; 机械强度好; 蒸汽消毒; 低萃取物; 辐射消毒; 双峰分子量分布; 环氧乙烷消毒; 抗应力开裂; 易加工; Good Rigidity,Excellent Processability,Low extract,Steam sterilized,Renewable resources,Radiation disinfection,Bimodal molecular weight distribution,High ESCR,Ethylene oxide disinfection
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
0.958 | g/cm³ | ISO 1183 |
|
熔体质量流动速率 Melt Flow Rate |
|||
|
190℃，2.16kg 190℃，2.16kg |
0.3 | g/10min | ISO 1133 |
|
190℃，5.0kg 190℃，5.0kg |
1.3 | g/10min | ISO 1133 |
|
熔体质量流动速率 Melt Flow Rate |
28 | ISO 1133 | |
|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
热变形温度 Hot deformation temperature |
|||
|
0.45 MPa，未退火 0.45 MPa, unannealed |
80.0 | ℃ | ISO 75-2/Bf |
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
邵氏硬度 Shore hardness |
|||
|
邵氏 D Shaw's D |
ISO 868 | ||
|
弯曲模量 Bending modulus |
MPa | ISO 527-2 | |
|
拉伸模量 Tensile modulus |
MPa | ISO 527-2 | |
|
膜抗拉强度 Membrane tensile strength |
MPa | ISO 527-3 | |
|
弹性模量 Elastic modulus |
MPa | ISO 527 | |
|
断裂抗拉强度 Breaking tensile strength |
MPa | ISO 527-2 | |
|
曲张伸长率 Elongation rate of flexure |
% | ISO 527 - 2 | |
| 备注 |
|---|
| 1 一般属性：这些不能被视为规格。 |
| 2 0.079 in/min |
|
【新闻资讯】查看全部 
互联网推进“无废城市”新树立
2019-02-12 国务院办公厅近日印发的《无废城市建设试点工作方案》提出，在全国范围内选择10个左右有条件、有基础、规模适当的城市，在全市域范围内开展无废城市建设试点。 无废城市是通过 |
|
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。 |
当前牌号已加入对比
支付宝
微信支付