HDPE，Bormed™ HE2581-PH对比HDPE，Borealis PE BS2581物性表,价格行情_搜料

牌号信息	Bormed™ HE2581-PH 物性表 HDPE & 奥地利北欧化工指导价格：31500.0元/吨塑料库存： 1050kg	Borealis PE BS2581 物性表 HDPE & 奥地利北欧化工指导价格：暂无塑料库存：缺货
牌号简介	Bormed™ HE2581-PH是一种用于医疗应用评估的树脂。Bormed™ HE2581-PH是一种双峰高密度聚乙烯，通常用于吹塑10升以下的物品。材料的特点是易于加工和产品具有很高的刚度和很好的环境应力抗裂性（ESCR）。这种材料也可以用于使用IBM技术生产的容器。材料可以用环氧乙烷、蒸汽和辐射灭菌至35千克；由于辐射灭菌，可能会出现一些轻微的黄变。 Bormed HE2581-PH is a resin intended for evaluation for use in Healthcare applications. Bormed HE2581-PH-03 is a bimodal high density polyethylene typically used for blow moulding of articles up to 10 litres. Material is characterised by easy processing and products with high stiffness and very good environmental stress crack resistance (ESCR). Material can also be used for containers produced with IBM technology. Material can be sterilised with ethylene oxide, steam and radiation up till 35 kGy; as a result of sterilisation by radiation some minor yellowing can occur. Applications Bormed HE2581-PH has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed HE2581-PH . Bottles and containers for tablets Bottles for IV-solutions Bottles and containers for powder Bottles for irrigation solutions Bottles and containers for granules Containers for fine chemicals or APIs This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure. Special Features Easy processing High ESCR Low extractables	BS2581是一种高密度聚乙烯，用于吹塑成型，具有很高的刚度和很好的环境应力抗裂性（ESCR）。 BS2581 is a high density polyethylene intended for blow moulding products with high stiffness and very good environmental stress crack resistance (ESCR).

产品描述
厂家：	奥地利北欧化工 Borealis AG	奥地利北欧化工 Borealis AG
类别：	HDPE HDPE	HDPE HDPE
填料：
用途：	瓶子,容器,药品包装,医疗/护理用品	工业应用,瓶子,容器,家用货品
性能特点：	机械强度好,易加工,低萃取物,蒸汽消毒,可回收,辐射消毒,双峰分子量分布,抗应力开裂,环氧乙烷消毒 Good Rigidity,Excellent Processability,Low extract,Steam sterilized,Renewable resources,Radiation disinfection,Bimodal molecular weight distribution,High ESCR,Ethylene oxide disinfection	机械强度好,抗应力开裂 Good Rigidity,High ESCR
加工条件：	挤出 Extrusion	吹塑成型

技术参数

物理性能
PHYSICAL Bormed™ HE2581-PH Borealis PE BS2581 单位
UNIT 测试方法
TEST METHOD

密度
Density g/cm³ ISO 1183

熔体质量流动速率(190℃，2.16kg)
Melt Flow Rate g/10min ISO 1133

熔体质量流动速率(190℃，5.0kg)
Melt Flow Rate g/10min ISO 1133

熔体质量流动速率(熔体质量流动速率)
Melt Flow Rate ISO 1133

熔体质量流动速率(熔体质量流动速率)
Melt Flow Rate g/10min ISO 1133

热性能
THERMAL Bormed™ HE2581-PH Borealis PE BS2581 单位
UNIT 测试方法
TEST METHOD

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃ ISO 75-2/Bf

机械性能
MECHANICAL Bormed™ HE2581-PH Borealis PE BS2581 单位
UNIT 测试方法
TEST METHOD

弯曲模量
Bending modulus MPa ISO 178

弯曲模量
Bending modulus MPa ISO 527-2

弹性模量
Elastic modulus MPa ISO 527

抗拉强度
tensile strength MPa ISO 527 - 2

拉伸应变(屈服)
Tensile strain % ISO 527-2

拉伸模量
Tensile modulus MPa ISO 527-2

断裂抗拉强度
Breaking tensile strength MPa ISO 527-2

曲张伸长率
Elongation rate of flexure % ISO 527 - 2

膜抗拉强度
Membrane tensile strength MPa ISO 527-3

邵氏硬度(邵氏 D)
Shore hardness ISO 868

加工方式

注射 Bormed™ HE2581-PH Borealis PE BS2581 单位测试方法

注塑温度螺筒中部温度 °C

注塑温度螺筒前部温度 °C

注塑温度螺筒后部温度 °C

备注

1 一般属性：这些不能被视为规格。

2 0.079 in/min

1 一般属性：这些不能被视为规格。

2 0.039 in/min


相关资讯

牌号简介
产品描述
技术参数
物理性能
热性能
机械性能
加工方式
注射
备注
返回顶部

HDPE，Bormed™ HE2581-PH对比HDPE，Borealis PE BS2581对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别