牌号简介 About |
---|
BayFIT 566是一种水发泡(MDI)/聚醚基泡沫系统,用于制造具有中等至高承载性能的高回弹(HR)冷固化柔性模塑泡沫。该系统的特点是在各种零件中都具有良好的流动性能。应用包括办公家具,休闲座椅,扶手和垫子。BayFIT 566泡沫在指数范围从80到105通常通过CAL -117的要求,以阻燃性。以较高指数制造的泡沫通常不会。与任何产品一样,在给定应用中使用Bayfit 566系统必须由用户提前进行测试(包括现场测试等),以确定其适用性。 Bayfit 566 is a water-blown (MDI)/polyether based foam system used to manufacture high resilience (HR) cold-cure flex molded foam with medium to high load bearing properties. This system is characterized by good flow behavior in a wide variety of parts. Applications include office furniture, recreational seating, armrests and cushions. Bayfit 566 foam made at indices ranging from 80 to 105 typically passes the requirements of CAL-117 for flame resistance. Foams made at higher indices typically do not. As with any product, use of the Bayfit 566 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.0449 | g/cm³ | ASTM D3574 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
0.103 | MPa | ASTM D3574 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
100 | % | ASTM D3574 |
撕裂阻力 Tear resistance |
446.4 | g/2.5 cm | ASTM D3574 |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
压缩形变 Compression deformation |
ASTM D3574 | ||
50% 50% |
3.8 | % | ASTM D3574 |
70% 70% |
% | ASTM D3574 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
IFD IFD |
ASTM D3574 | ||
25% R:102 mm 25% R:102 mm |
lb/50 in² | ASTM D3574 | |
65% R:102 mm 65% R:102 mm |
lb/50 in² | ASTM D3574 | |
SAG Factor(65%/25% IFD) SAG Factor(65%/25% IFD) |
ASTM D3574 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
长先新材PPS “塑”造未来新能源汽车需求
2021-05-28 搜料网资讯: 中国汽车工业协会近日发布3月汽车工业产销数据,一季度,新能源汽车产销双双超过50万辆,分别达到53.3万辆和51.5万辆,同比增长3.2倍和2.8倍,新能源汽车的增量带动了 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |