![](/page/pc/images/result/icon-datasheet-right-ad-none.png)
![](/page/pc/images/result/downloads-img2.png)
公司信息及水印
![](/page/pc/images/result/downloads-img4.png)
![](/page/pc/images/result/downloads-img1.png)
![](/page/pc/images/result/downloads-tag3.png)
![](/page/pc/images/result/downloads-img1.png)
![](/page/pc/images/result/downloads-tag3.png)
![](/page/pc/images/result/downloads-img3.png)
牌号简介 About |
---|
POLIFIL RP-HDPE是一种中等硬度的材料,具有良好的韧性。高密度聚乙烯具有优异的耐化学性能和耐环境应力开裂性能。注射成型应用范围从小型容器和盖子到大型板条箱和箱子。使用此信息作为指南,帮助您选择适合您应用的树脂。TPG将为您的应用定制化合物并微调我们的配方。 Polifil ® RP-HDPE is a moderate stiffness material that retains excellent toughness. HDPE exhibits outstanding chemical resistance and environmental stress crack resistance. Injection molding applications range from small containers and lids to large crates and bins. Low melt flow versions are used for blow molded bottles for milk, cosmetics, and chemicals, and in extruded items such as pipes and profiles. High molecular weight (HMW) grades are increasingly used for high strength blown films, and large blow molded items such as drums, water tanks, and toys. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.958 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
0.10 到 5.0 | g/10min | ASTM D1238 |
收缩率 Shrinkage rate |
|||
MD:3.2 mm MD:3.2 mm |
2.8 | % | ASTM D955 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
85 | J/m | ASTM D256 |
落锤冲击 Drop hammer impact |
|||
23℃,12.7 mm 23℃,12.7 mm |
> 22.6 | J | ASTM D3029 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D1415 | ||
拉伸模量 Tensile modulus |
|||
23℃ 23℃ |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
23℃ 23℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
ASTM D638 | ||
屈服,23℃ Yield, 23 ℃ |
% | ASTM D638 | |
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
正切,23℃ Tangent, 23 ℃ |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
23℃ 23℃ |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
注塑工艺的5重境界
2016-01-14 注塑作为一门应用广泛,从业者众多的行业,其工艺技术是制造生产的重要因素。同样一副模具,在庸者手中,可能调教几周,改模数次而不得要领,但换个人可能半个小时不用改模就OK了,这是水平差异。 虽然现在这种差异随着mold-flow的推演,材料理化性能的定制,模具水平的提升而变窄或模糊,但其中差距还是不容小觑的。笔者研习多年,觉得其工艺技术水平可以分5重境界。 第1重――“纸上谈兵” |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |