牌号简介 About |
---|
insulcast 136是一种易于使用的环氧浇注/灌封化合物,对金属、陶瓷和大多数塑料具有优异的粘附性。当用绝缘11b进行适当的固化时,绝缘136将符合MIL-I-16923,B型,C&D的要求,并且不支持真菌生长。 INSULCAST 136 is an easy to use epoxy casting/potting compound exhibiting excellent adhesion to metals, ceramics and most plastics. When properly cured with INSULCURE 11B, INSULCAST 136 will conform to the requirements of MIL-I-16923, Types B, C & D, and will not support fungus growth. |
技术参数 Technical Data | |||
---|---|---|---|
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
5.0E+16 | ohms·cm | ASTM D257 |
介电强度 Dielectric strength |
17 | kV/mm | ASTM D149 |
介电常数 Dielectric constant |
|||
1 kHz 1 kHz |
4.80 | ASTM D150 | |
耗散因数 Dissipation factor |
|||
1 kHz 1 kHz |
0.020 | ASTM D150 | |
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
颜色 colour |
|||
-- -- 2 |
Amber | ||
-- -- 3 |
|||
密度 Density |
|||
-- -- 2 |
g/cm³ | ||
-- -- 3 |
g/cm³ | ||
粘度 viscosity |
ASTM D2393 | ||
-- -- 2 |
Pa·s | ASTM D2393 | |
-- -- 4 |
Pa·s | ASTM D2393 | |
-- -- 3 |
Pa·s | ASTM D2393 | |
固化时间 Curing time |
|||
100℃ 100℃ |
hr | ||
储存稳定性 storage stability |
|||
25 ℃ 25 ℃ |
min | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Linear Shrinkage Linear Shrinkage |
% | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ||
导热系数 Thermal conductivity coefficient |
W/m/K | ||
热变形温度 Hot deformation temperature |
℃ | ||
使用温度 Operating temperature |
℃ | ||
热固组件 Thermosetting components |
|||
树脂 resin |
|||
硬化法 Hardening method |
|||
贮藏期限 Storage period |
wk | ||
后固化时间 Post curing time |
|||
150℃ 150℃ |
hr |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 INSULCURE 11B |
3 INSULCAST 136 |
4 Mixed |
【新闻资讯】查看全部
脑洞大开!飞机内饰竟然可以这样3D打印出来!
2017-07-13 总部位于中国香港的Western Tool & Mold (WTM)服务于航空航天内饰市场,在该市场中,航空公司需要快速更换零件来提高供应链效率,但由于个别组件的几何形状很独特,这种需求往往很难得到满足。 Western Tool & Mold目前正在使用Stratasys 3D打印技术来打印具有复杂外形和少量需求的飞机零件,如头等舱头顶行李箱储物柜和卫生间组件。通过直接使用CAD设计3D打印这些零件,省略金属制造流程,WTM的客户可以在设计过程的早期测试零 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |