公司信息及水印
牌号简介 About |
---|
Dyna-purge M是塑料工业中用途最广泛的一种多用途非研磨、非化学工程热塑性清洗化合物,其配方可通过注塑机的筒体和热流道系统以及挤出设备自然流动。两种非熔化但软化的热塑性成分擦洗,而独家专有的添加剂有助于去除任何污染物而不留下残渣。特点和优点:针对颜色变化、树脂变化、预防性机器维护和手动清洗前进行开发,非常适合在350°F至600°F(177°C至315°C)的宽温度范围内通过最小间隙为0.030英寸(0.75 mm)的热流道系统进行清洗,使用方便-无需工艺调整-在常驻树脂加工温度和转速下使用非磨蚀、非熔化但软化的热塑性塑料,可彻底松脱碳化和降解的树脂,使其安全、无害地从系统中冲洗出来,不含任何化学物质-成分符合FDA热稳定要求-建议在停机和启动期间使用低”每次吹扫的成本-仅需少量有效,无需混合-简单使用“原样”无限保质期。 Most versatile & widely used in the Plastics Industry DYNA-PURGE M is a versatile non-abrasive, non-chemical engineered thermoplastic purging compound, formulated to flow naturally through the barrel and hot runner system of the injection molding machine, as well as extrusion equipment. Two non-melting but softening thermoplastic ingredients scrub, while an exclusive proprietary additive helps to remove any contamination without leaving a residue. FEATURES & BENEFITS: Developed for color changes, resin changes, preventative machine maintenance and before manual cleaning Excellent for purging through hot runner systems with a minimum clearance of 0.030 inch (0.75 mm) Effective through a wide temperature range 350°F to 600°F(177°C to 315°C) Easy to use - no process adjustment necessary - use at the resident resin processing temperature and RPM speed Non-abrasive, non-melting but softening thermoplastic, which thoroughly loosens carbonized and degraded resin, allowing it to be flushed out of the system Safe, non-hazardous, with no chemicals - ingredients are FDA compliant Heat stable - recommended during shutdown and start-up Low "cost-per-purge" - only small quantity needed to be effective No mixing required - simply use "as is" Unlimited shelf life |
技术参数 Technical Data | |||
---|---|---|---|
暂无数据 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
“指尖上的外卖”来袭 塑料餐盒污染何时休
2017-07-06 动动手指就能让食物送货上门,互联网的便捷可见一斑。但是,网络订餐行业的飞速发展也从另一个侧面引发了新的“白色污染”问题。塑料餐盒成灾,回收利用率却极低,这种现象是如何产生的呢? “指尖上的 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |