3D打印材料，Dyna-Purge® M对比3D打印材料，Accura® Bluestone™物性表,价格行情_搜料

牌号信息	Dyna-Purge® M 物性表 3D打印材料 & 美国Dyna-Purge 指导价格：暂无塑料库存：缺货	Accura® Bluestone™ 物性表 3D打印材料 & 美国3D Systems 指导价格：暂无塑料库存：缺货
牌号简介	Dyna-purge M是塑料工业中用途最广泛的一种多用途非研磨、非化学工程热塑性清洗化合物，其配方可通过注塑机的筒体和热流道系统以及挤出设备自然流动。两种非熔化但软化的热塑性成分擦洗，而独家专有的添加剂有助于去除任何污染物而不留下残渣。特点和优点：针对颜色变化、树脂变化、预防性机器维护和手动清洗前进行开发，非常适合在350°F至600°F（177°C至315°C）的宽温度范围内通过最小间隙为0.030英寸（0.75 mm）的热流道系统进行清洗，使用方便-无需工艺调整-在常驻树脂加工温度和转速下使用非磨蚀、非熔化但软化的热塑性塑料，可彻底松脱碳化和降解的树脂，使其安全、无害地从系统中冲洗出来，不含任何化学物质-成分符合FDA热稳定要求-建议在停机和启动期间使用低”每次吹扫的成本-仅需少量有效，无需混合-简单使用“原样”无限保质期。 Most versatile & widely used in the Plastics Industry DYNA-PURGE M is a versatile non-abrasive, non-chemical engineered thermoplastic purging compound, formulated to flow naturally through the barrel and hot runner system of the injection molding machine, as well as extrusion equipment. Two non-melting but softening thermoplastic ingredients scrub, while an exclusive proprietary additive helps to remove any contamination without leaving a residue. FEATURES & BENEFITS: Developed for color changes, resin changes, preventative machine maintenance and before manual cleaning Excellent for purging through hot runner systems with a minimum clearance of 0.030 inch (0.75 mm) Effective through a wide temperature range 350°F to 600°F(177°C to 315°C) Easy to use - no process adjustment necessary - use at the resident resin processing temperature and RPM speed Non-abrasive, non-melting but softening thermoplastic, which thoroughly loosens carbonized and degraded resin, allowing it to be flushed out of the system Safe, non-hazardous, with no chemicals - ingredients are FDA compliant Heat stable - recommended during shutdown and start-up Low "cost-per-purge" - only small quantity needed to be effective No mixing required - simply use "as is" Unlimited shelf life	具有最高的刚度、耐热性和耐磨性、优异的耐化学性，适用于风洞模型、夹具和固定装置。 Features Highest stiffness available Heat and abrasion resistant Excellent chemical resistance Great for windtunnel models, jigs and fixtures

产品描述
厂家：	美国Dyna-Purge	美国3D Systems
类别：	3D打印材料 3D打印材料	3D打印材料 3D打印材料
填料：
用途：	清洗复合物
性能特点：		机械强度好,耐高温,耐磨,耐化学性 Good Rigidity,High Heat Resistance,Good wear resistance,Solvent resistance
加工条件：	挤出吹塑成型	立体光刻