公司信息及水印
牌号简介 About |
---|
AOC的VipelF010系列是一种溶于苯乙烯的双酚A环氧乙烯基酯树脂。VIPEL F010系列非常适合用于手工铺层、喷涂、纤维缠绕、SMC和拉挤成型工艺,其中突出的机械性能和优异的耐化学品和耐热性是必需的。优点:多功能宽配方设计功能可用于许多流程,并可优化成本/性能。独特的组成产生了一个坚韧和多用途的树脂,具有优异的裂缝和耐开裂性的模件。Vipel F010适用于承受特别高静态或动态载荷的模具,如管道、水箱、管道工程和地板应用。乙烯基酯树脂具有优异的耐热性。耐腐蚀性强的VipelF010对过氧化氢和碱有很高的抵抗力,在次氯酸盐和氯气生产的各个阶段表现良好。请参阅AOC的“耐腐蚀树脂指南”,了解耐腐蚀信息或有关树脂适用于任何特定化学环境的问题,请联系AOC。 AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required. BENEFITS Versatile Wide formulating capabilities allow for use in many processes and for optimization of cost/performance. Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts. Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat. Corrosion Resistance Vipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
苯乙烯含量 styrene content |
39 | % | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
120 | ℃ | ASTM D648 |
玻璃化转变温度 Glass transition temperature |
130 | ℃ | DIN 53445 |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
> 1.0E+13 | ohms | DIN 53482 |
体积电阻率 Volume resistivity 2 |
> 1.0E+16 | ohms·cm | DIN 53482 |
介电强度 Dielectric strength |
|||
0.7 mm 0.7 mm |
kV/mm | DIN 53481 | |
介电常数 Dielectric constant |
DIN 53483 | ||
60 Hz 60 Hz 2 |
DIN 53483 | ||
60 Hz 60 Hz 3 |
DIN 53483 | ||
1 kHz 1 kHz 2 |
DIN 53483 | ||
1 kHz 1 kHz 3 |
DIN 53483 | ||
1 MHz 1 MHz 2 |
DIN 53483 | ||
1 MHz 1 MHz 3 |
DIN 53483 | ||
耗散因数 Dissipation factor |
DIN 53483 | ||
60 Hz 60 Hz 2 |
DIN 53483 | ||
60 Hz 60 Hz 3 |
DIN 53483 | ||
1 kHz 1 kHz 2 |
DIN 53483 | ||
1 kHz 1 kHz 3 |
DIN 53483 | ||
1 MHz 1 MHz 2 |
DIN 53483 | ||
1 MHz 1 MHz 3 |
DIN 53483 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
Critical Strain Energy Critical Strain Energy |
J/m² | ASTM E399 | |
Gel to Peak Gel to Peak |
min | ||
放热峰值 exothermic peak |
℃ | ||
Stress Intensity Factor Stress Intensity Factor |
ASTM E399 | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
g/cm³ | ||
粘度 viscosity |
|||
布络克菲尔德 RVT,25℃ 25℃,Brookfield RVT |
Pa·s | ||
胶凝时间 Gelation time |
|||
25℃ 25℃ |
min | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
巴氏硬度 Babbitt hardness |
ASTM D2583 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
压缩强度 compressive strength |
MPa | ASTM D695 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 after 24 hrs in drinking water |
3 Dry |
【新闻资讯】查看全部
油价最新消息:国际油价“下跌1.04%”,下周迎第16次油价调整
2021-08-19 搜料网资讯: 今早收盘的国际油价继续下跌,这让布伦特原油价格还在69美元/桶的范围,美国原油也回到66美元附近,这让下周进行的今年第16次油价调整,目前还是预计下跌的状态,下 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |