牌号简介 About |
---|
Hapflex 500系列提供全系列软硬度计,从45-95邵尔A,而Hapflex 600系列在邵尔D标度从50-70邵尔D产生更硬的硬度计。所有都是相对快速,室内固化,灵活的系统,不需要后固化,但可以用中等热量加速,以更快固化。大多数Hapflex 500和600产品提供两种速度:标准的30-45分钟工作时间和3-6分钟快速拆卸工作时间。Hapflex弹性体的粘度较低,易于搬运和浇注,但仍然提供表面细节的精确复制表面光洁度。此外,Hapflex弹性体实际上具有抗冲击性和不易破碎性,特别适合使用或储存期间不会开裂或碎裂的永久模具、零件或主模型。一个主要的优点是,Hapflex弹性体具有优异的耐磨性能。精确跟踪图案、辊套、夹具、柔性零件、成形模具、弯曲工具和各种铸造应用程序只是Hapflex应用程序的几个例子。提供阻燃剂 The Hapflex 500 series offers a full range of soft durometers, from 45 - 95 Shore A, while the Hapflex 600 series yields harder durometers on the Shore D scale ranging from 50 - 70 Shore D. All are relatively fast, room curing, flexible systems that do not require post curing, but can be accelerated with moderate heat for faster curing. Most Hapflex 500 & 600 products are offered in 2 speeds: a standard 30-45 minute working time, and a 3-6 minute working time for fast demold. The Hapflex elastomers are low viscosity, making them easy to handle and pour, yet still provide precise duplications of surface details surface finishes. In addition, the Hapflex elastomers are virtually shock resistant and unbreakable, making them exceptionally well suited for permanent molds, parts or master patterns that will not crack or chip during use or storage. A major advantage is the superior abrasion resistance properties of the Hapflex elastomers. Precision tracing patterns, roll coverings, fixtures, flexible parts, forming dies, bending tools, and a variety of foundry applications are just a few examples of Hapflex applications. Available in Flame Retardant |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.10 | g/cm³ | ASTM D4669 |
收缩率 Shrinkage rate |
|||
MD MD |
0.10 到 0.30 | % | ASTM D2566 |
Weight(per cubic inch) Weight(per cubic inch) |
17 | g | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
撕裂强度 tear strength 2 |
78.8 | kN/m | ASTM D624 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
120 | J/m | ASTM D256 |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
ASTM D256 | ||
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
25℃ 25℃ |
cP | ASTM D4878 | |
脱模时间 stripping time |
|||
21℃ 21℃ |
min | 内部方法 | |
胶凝时间 Gelation time 3 |
|||
25℃ 25℃ 3 |
min | ASTM D2971 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 C 模具 |
3 100 g |
【新闻资讯】查看全部
黄祝龄:陶氏化学不纠结
2016-01-08 前段时间大热的电影《火星救援》最后,马特・达蒙扮演的植物学最终活了下来,返回地球后他有这样一段台词:“……你只要开始,进行计算,解决一个问题,解决下一个问题,解决下下个问题。等解决了足够的问题,你就能回家了。” 恰巧,接受记者专访时,陶氏化学亚太区总裁黄祝龄一开场就聊到了电影,“我减压的一个方法就是看电影。在黑暗的环境里很安静,看电影什么都不用想。” 在陶氏工作了25年,两年前接手大中华区,黄祝龄给陶氏的同事们留下的印象是一名“问题解决者”,他在采访中也有类 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |