![](/page/pc/images/result/icon-datasheet-right-ad-none.png)
![](/page/pc/images/result/icon-datasheet-right-ad-none.png)
![](/page/pc/images/result/downloads-img2.png)
公司信息及水印
![](/page/pc/images/result/downloads-img4.png)
![](/page/pc/images/result/downloads-img1.png)
![](/page/pc/images/result/downloads-tag3.png)
![](/page/pc/images/result/downloads-img1.png)
![](/page/pc/images/result/downloads-tag3.png)
![](/page/pc/images/result/downloads-img3.png)
牌号简介 About |
---|
HP-200是一种经聚丙烯认证的基本树脂,专为薄壁轻质制品的注塑成型而设计。HP-200具有良好的拉伸强度平衡性和中高流动加工性、高刚度、短循环、良好的LTS和良好的ESCR。HP-200推荐的加工温度在220°C至240°C之间,模具温度为20°C至50°C。HP-200符合FDA法规21CFR 177.1520和大多数有关在食品接触中使用聚丙烯的国际法规。可根据要求提供特定证书。 HP-200 is a Polypropylene certified prime resin designed for injection molding of thin-walled lightweight articles. HP-200 combines good balance of good tensile strength with medium-high flow processability high stiffness, short cycling, good LTHS and excellent ESCR. HP-200 recommended processing temperature is between 220° to 240°C with mold at 20°-50°C. HP-200 complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use of Polypropylene in contact with food. Specific certificates are available upon request. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.905 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
20 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
27 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
106 | ℃ | ASTM D648 |
维卡软化温度 Vicat Softening Temp |
152 | ℃ | ASTM D1525 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸强度 tensile strength 2 |
|||
屈服 yield 2 |
MPa | ASTM D638 | |
拉伸应变 Tensile strain 2 |
|||
屈服 yield 2 |
% | ASTM D638 | |
弯曲模量 Bending modulus 3 |
|||
1% 正割 1% secant 3 |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 2.0 in/min |
3 0.051 in/min |
【新闻资讯】查看全部
“限塑令”可推行至快递业
2017-11-10 据报道,国家发展改革委主要负责人近日表示,将会同相关部门研究调整“限塑令”,研究制定在电商、快递、外卖等行业率先限制一系列不可降解塑料包装使用的相关实施方案,同时督促地方特别是城市加大落实力度。 2007年国办印发的“限塑令”,明确规定销售环节的限制对象是所有超市、商场、集贸市场等商品零售场所。由于大部分商场超市实行塑料购物袋有偿使用制度,很多消费者已经使用布袋等购物,“限塑令”收到一定的效果。当时电商、快递、外卖行业规模较小,使用塑料袋现象不是很普遍,这些行业并没有纳入限 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |