PP均聚，SureSpec HP-200对比PP均聚，CERTENE™ PHM-20物性表,价格行情_搜料

牌号信息	SureSpec HP-200 物性表 PP均聚 & 美国Genesis 指导价格：暂无塑料库存：缺货	CERTENE™ PHM-20 物性表 PP均聚 & 美国Channel Prime Alliance 指导价格：暂无塑料库存：缺货
牌号简介	HP-200是一种经聚丙烯认证的基本树脂，专为薄壁轻质制品的注塑成型而设计。HP-200具有良好的拉伸强度平衡性和中高流动加工性、高刚度、短循环、良好的LTS和良好的ESCR。HP-200推荐的加工温度在220°C至240°C之间，模具温度为20°C至50°C。HP-200符合FDA法规21CFR 177.1520和大多数有关在食品接触中使用聚丙烯的国际法规。可根据要求提供特定证书。 HP-200 is a Polypropylene certified prime resin designed for injection molding of thin-walled lightweight articles. HP-200 combines good balance of good tensile strength with medium-high flow processability high stiffness, short cycling, good LTHS and excellent ESCR. HP-200 recommended processing temperature is between 220° to 240°C with mold at 20°-50°C. HP-200 complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use of Polypropylene in contact with food. Specific certificates are available upon request.	certene phm-20 phm-20是一种经认证的优质聚丙烯，设计用于注射成型薄壁轻质制品。PHM-20具有良好的中高流动加工平衡性、良好的拉伸强度、高刚度、良好的LTH、短循环和良好的ESCR。PHM-20应用包括轻型容器、医疗用品、瓶盖和瓶盖以及家庭用品。PHM-20推荐的加工温度在220°C至240°C之间，模具温度在20°C至50°C之间。PHM-20符合FDA法规21CFR 177.1520和大多数有关在食品接触中使用聚丙烯的国际法规。可根据要求提供特定证书。 CERTENE™ PHM-20 PHM-20 is a certified prime grade Polypropylene designed for injection molding of thin-walled lightweight articles. PHM-20 combines good balance of medium-high flow processability with good tensile strength, high stiffness, good LTHS, short cycling, and excellent ESCR. PHM-20 applications include lightweight containers, medical ware, caps and closures, and housewares. PHM-20 recommended processing temperature is between 220° to 240°C with mold at 20°-50°C. PHM-20 complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use of Polypropylene in contact with food. Specific certificates are available upon request. CERTENE™ PHM-20 PHM-20 is a certified prime grade Polypropylene designed for injection molding of thin-walled lightweight articles. PHM-20 combines good balance of medium-high flow processability with good tensile strength, high stiffness, good LTHS, short cycling, and excellent ESCR. PHM-20 applications include lightweight containers, medical ware, caps and closures, and housewares. PHM-20 recommended processing temperature is between 220° to 240°C with mold at 20°-50°C. PHM-20 complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use of Polypropylene in contact with food. Specific certificates are available upon request.

产品描述
厂家：	美国Genesis	美国Channel Prime Alliance
类别：	PP均聚 PP homopolymerization	PP均聚 PP homopolymerization
填料：
用途：	薄壁部件	护罩,医疗/护理用品,薄壁容器,家用货品
性能特点：	机械强度好,流动性高,成型周期快,食品接触,拉伸性能好,抗应力开裂,均聚物 Good Rigidity,High liquidity,Quick molding cycle,Food contact compliance,Good Tensile Strength,High ESCR,Homopolymer	机械强度好,易加工,流动性高,成型周期快,食品接触,拉伸性能好,抗应力开裂,均聚物 Good Rigidity,Excellent Processability,High liquidity,Quick molding cycle,Food contact compliance,Good Tensile Strength,High ESCR,Homopolymer
加工条件：	注射成型 Injection Molding	注射成型 Injection Molding

技术参数

物理性能
PHYSICAL SureSpec HP-200 CERTENE™ PHM-20 单位
UNIT 测试方法
TEST METHOD

密度
Density g/cm³ ASTM D1505

密度
Density g/cm³ ASTM D792

熔体质量流动速率(230℃，2.16kg)
Melt Flow Rate g/10min ASTM D1238

冲击性能
IMPACT SureSpec HP-200 CERTENE™ PHM-20 单位
UNIT 测试方法
TEST METHOD

悬臂梁缺口冲击强度
Impact strength of cantilever beam notch J/m ASTM D256

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch J/m ASTM D256

热性能
THERMAL SureSpec HP-200 CERTENE™ PHM-20 单位
UNIT 测试方法
TEST METHOD

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

维卡软化温度
Vicat Softening Temp ℃ ASTM D1525

维卡软化温度()
Vicat Softening Temp ℃ ASTM D1525

机械性能
MECHANICAL SureSpec HP-200 CERTENE™ PHM-20 单位
UNIT 测试方法
TEST METHOD

弯曲模量(1% 正割)
Bending modulus MPa ASTM D790

弯曲模量(23℃)
Bending modulus MPa ASTM D790

拉伸应变(屈服)
Tensile strain % ASTM D638

拉伸应变(断裂，23℃)
Tensile strain % ASTM D638

拉伸强度(23℃)
tensile strength MPa ASTM D638

拉伸强度(屈服)
tensile strength MPa ASTM D638

洛氏硬度
Rockwell hardness R 级 ASTM D785

洛氏硬度(R 级)
Rockwell hardness ASTM D785

加工方式

注射 SureSpec HP-200 CERTENE™ PHM-20 单位测试方法

加工熔体温度 °C

模具温度 °C

注塑温度模具温度 °C

注塑温度模头温度 °C

注塑温度螺筒中部温度 °C

注塑温度螺筒前部温度 °C

注塑温度螺筒后部温度 °C

备注

1 一般属性：这些不能被视为规格。

2 2.0 in/min

3 0.051 in/min

1 一般属性：这些不能被视为规格。

2 2.0 in/min

3 0.051 in/min


相关资讯

牌号简介
产品描述
技术参数
物理性能
冲击性能
热性能
机械性能
加工方式
注射
备注
返回顶部

PP均聚，SureSpec HP-200对比PP均聚，CERTENE™ PHM-20对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别