公司信息及水印
牌号简介 About |
---|
Melochem 791粉末状模塑料是以三聚氰胺甲醛树脂为基础,以高级纤维素为增强剂,并进一步用少量专用添加剂、颜料、固化调节剂和润滑剂进行改性。Melochem 791模塑料可以提供从半透明粉彩到黑色的大多数颜色。模件无异味,光稳定性好,防潮性好。表面坚硬光滑,具有优异的耐刮性和耐化学性。脂肪、油和常见的有机溶剂(如酒精和丙酮)不会腐蚀材料,它们也能抵抗表面活性剂和弱碱。它们也能在较短的时间内抵抗弱酸的攻击。氧指数为40%,不使用外部阻燃剂即可达到。成分中不存在卤素。产品符合广泛使用的材料规范的要求:DIN 7708 152型和152.7(*)ISO 2112 MF B10型和B11(*)UL认证(*)包括在ISO 14528的应用领域:独特的类瓷性能,与任何其他塑料材料都不匹配,使Melochem 791模塑料特别适合于家庭和食品服务应用的数量,包括餐具、拉面、烟灰缸、壶、勺子、碗和类似物品。Melochem 791还用于制造零售、商业和军用级按钮。通过在表面压上一层箔,可以获得无限范围的装饰图案。模制品具有低吸水性,因此是洗碗机安全的。 The Melochem 791 Moulding Compound in powder form are based on melamine-formaldehyde resins fortified with high-class cellulose as reinforcement and further modified with minor amounts of special purpose additives, pigments, cure regulators and lubricants. The Melochem 791 Moulding Compounds can be supplied in most colours from translucent pastels to black. Moulded parts are free from odour, light stable and have good moisture resistance. Hard and Glossy surface with excellent scratch and chemical resistance. Fats, oils and common organic solvents like alcohol and acetone do not attack the materials and they are also resistant to surfactants and weak bases. They will also withstand attack from weak acids fro a shorter duration. Oxygen index is 40% and is achieved without the use of external flame retardants. No halogens are present in the composition. The products comply with the requirements of the widely used material specifications : DIN 7708 type 152 and 152.7 (*) ISO 2112 type MF B10 and B11 (*) UL certified (*) included in ISO 14528 Fields of application: Unique porcelain-like properties, unmatched by any other plastic material, makes Melochem 791 Moulding Compound particularly suitable for a number of household and foodservice applications including dinnerware, ramekins, ashtrays, jugs, ladles, bowls and similar objects. Melochem 791 is also used in the manufacture of retail, commercial and military grade buttons. By pressing a foil onto the surface, unlimited range of decorative patterns can be achieved. The moulded items exhibit low water absorption properties and are therefore are dishwasher safe. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.50 | g/cm³ | ISO 1183 |
收缩率 Shrinkage rate |
ISO 2577 | ||
-- -- |
0.60 到 0.80 | % | ISO 2577 |
-- -- 3 |
1.0 到 1.3 | % | ISO 2577 |
吸水率 Water absorption rate |
< 200.0 | mg | ISO 62 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
> 45.0 | MPa | ISO 527-2 |
弯曲强度 bending strength |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
kJ/m² | ISO 179-1eA | |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
kJ/m² | ISO 179/1eU | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
8.0 MPa,未退火 8.0 MPa, unannealed |
℃ | ISO 75-2/C | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | IEC 60093 | |
介电常数 Dielectric constant |
DIN 53483 | ||
耗散因数 Dissipation factor |
|||
1 kHz 1 kHz |
IEC 60250 | ||
相比漏电起痕指数 Compared to the leakage tracing index |
V | IEC 60112 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
灼热丝可燃性指数 Glowing wire flammability index 4 |
℃ | IEC 707 | |
极限氧指数 Extreme oxygen index |
% | ASTM D2863 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
排放 discharge |
ISO 4614 | ||
Acetic Acid Acetic Acid |
mg/l | ISO 4614 | |
Ethanol Ethanol |
mg/l | ISO 4614 | |
Water Water |
mg/l | ISO 4614 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Post-shrink |
3 180 sec, < B H2-10 |
【新闻资讯】查看全部
2015轮胎行业十大技术趋向
2015-12-29 2015年,轮胎行业呈现出一些前所未有的技术趋势。 这一年,智能轮胎、自修复轮胎逐渐成为各国轮胎企业的新宠;航空轮胎在中国获得突破性进展;缺气保用胎正式进入普及阶段;不断涌现的轮胎新材料一次次拨动着整个行业的神经…… 业内普遍认为,面对这些技术新趋势,轮胎企业不能墨守成规,只有顺势而为,才能有所作为。尤其对处于“内外交困”的中国轮胎企业而言,把握技术趋势显得更为迫切。 智能轮胎逐渐投入实用 所 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |