牌号简介 About |
---|
SABIC LLDPE MG500026 SABIC LLDPE MG50026是一种具有窄分子量分布的高流动线性密度共聚物级。SABIC LLDPE MG50026树脂呈粉末状。应用SABIC® LLDPE MG500026通常用于要求高填料接受度和良好流动性的注塑母粒。由于树脂是以自由流动的粉末形式提供的,因此可以用于母粒生产,其中使用的是聚乙烯粉末。本产品不适用于任何医药/医疗应用,也不得用于任何医药/医疗应用。SABIC LLDPE MG500026 SABIC LLDPE MG50026是一种具有窄分子量分布的高流动线性密度共聚物级。SABIC LLDPE MG50026树脂呈粉末状。SABIC® LLDPE MG500026树脂推荐用于需要高填料验收的注塑母粒,并结合良好的流动性。由于树脂以粉末形式供应,因此非常适合于使用聚乙烯粉末的母料生产。本文所述产品尤其未经测试,因此未经验证可用于医药/医疗应用。 SABIC® LLDPE MG500026 SABIC® LLDPE MG50026 is a high flow linear density copolymer grade with a narrow molecular weight distribution. SABIC® LLDPE MG50026 resin is in powder form. Application SABIC® LLDPE MG500026 typically used for injection moulding masterbatches where a high filler acceptance is required, combined with a good flow. Since the resin is supplied in free flowing powder form it can be used for masterbatch production where PE powders are used. This product is not intended for and must not be used in any pharmaceutical/medical applications. SABIC® LLDPE MG500026 SABIC® LLDPE MG50026 is a high flow linear density copolymer grade with a narrow molecular weight distribution. SABIC® LLDPE MG50026 resin is in powder form. SABIC® LLDPE MG500026 resin is recommended for injection moulding masterbatch where a high filler acceptance is required, combined with a good flow. Since the resin is supplied in powder form it is extremely suited for masterbatch production where PE powders are used. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.926 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
50 | g/10min | ASTM D1238 |
抗环境应力开裂 ESCR(Environmental Stress Cracking Resistance) |
|||
模压成型 Compression Molding |
2.00 | hr | ASTM D1693 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,模压成型 23 ℃, molded |
450 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Embrittlement temperature |
< -75.0 | ℃ | ASTM D746 |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 1 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,模压成型 Shaw's D, molded |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
|||
1% 正割,模压成型 1% cut, molded |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
ASTM D638 | ||
屈服,模压成型 Yield, molding |
MPa | ||
断裂,模压成型 Fracture, molded |
MPa | ||
拉伸应变 Tensile strain |
|||
断裂,模压成型 Fracture, molded |
% | ASTM D638 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 压 力1 (10N) |
3 速率 A (50°C/h), 压 力1 (10N) |
【新闻资讯】查看全部
生物可降解咖啡胶囊
2018-10-23 世界先进材料制造商奥地利阿尔普拉公司已经开发出了一种市场成熟的世界首个生物可降解咖啡胶囊,消费者可以在他们的家庭堆肥中自行处理。 该胶囊由复合绿色材料制成,包括有机基材料和葵花籽壳磨碎的天然纤维。胶囊和过 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |