LLDPE，SABIC® LLDPE MG500026对比LLDPE，SABIC® LLDPE M500026物性表,价格行情_搜料

牌号信息	SABIC® LLDPE MG500026 物性表 LLDPE & 沙特沙伯基础指导价格：暂无塑料库存：缺货	SABIC® LLDPE M500026 物性表 LLDPE & 沙特沙伯基础指导价格：暂无塑料库存： 1000kg
牌号简介	SABIC LLDPE MG500026 SABIC LLDPE MG50026是一种具有窄分子量分布的高流动线性密度共聚物级。SABIC LLDPE MG50026树脂呈粉末状。应用SABIC® LLDPE MG500026通常用于要求高填料接受度和良好流动性的注塑母粒。由于树脂是以自由流动的粉末形式提供的，因此可以用于母粒生产，其中使用的是聚乙烯粉末。本产品不适用于任何医药/医疗应用，也不得用于任何医药/医疗应用。SABIC LLDPE MG500026 SABIC LLDPE MG50026是一种具有窄分子量分布的高流动线性密度共聚物级。SABIC LLDPE MG50026树脂呈粉末状。SABIC® LLDPE MG500026树脂推荐用于需要高填料验收的注塑母粒，并结合良好的流动性。由于树脂以粉末形式供应，因此非常适合于使用聚乙烯粉末的母料生产。本文所述产品尤其未经测试，因此未经验证可用于医药/医疗应用。 SABIC® LLDPE MG500026 SABIC® LLDPE MG50026 is a high flow linear density copolymer grade with a narrow molecular weight distribution. SABIC® LLDPE MG50026 resin is in powder form. Application SABIC® LLDPE MG500026 typically used for injection moulding masterbatches where a high filler acceptance is required, combined with a good flow. Since the resin is supplied in free flowing powder form it can be used for masterbatch production where PE powders are used. This product is not intended for and must not be used in any pharmaceutical/medical applications. SABIC® LLDPE MG500026 SABIC® LLDPE MG50026 is a high flow linear density copolymer grade with a narrow molecular weight distribution. SABIC® LLDPE MG50026 resin is in powder form. SABIC® LLDPE MG500026 resin is recommended for injection moulding masterbatch where a high filler acceptance is required, combined with a good flow. Since the resin is supplied in powder form it is extremely suited for masterbatch production where PE powders are used. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.	SABIC LLDPE M500026 SABIC® LLDPE M500026是一种具有窄分子量分布的高流动性线性低密度聚乙烯共聚物注塑级。它通常被设计成具有良好的低温韧性、抗应力开裂性（ESCR）、可塑性和光泽。典型应用。注射成型：SABIC® LLDPE M500026通常用于容器的注射成型、闭合盖和快速循环、深拉注射成型应用，这充分利用了其高流动性。此外，与相同密度的传统聚乙烯相比，该材料的较高熔点允许较高的最终使用温度。母粒配制：SABIC® LLDPE M500026树脂通常用于注射成型母粒，需要高填料验收和良好的流动性。本产品不适用于任何医药/医疗应用，也不得用于任何医药/医疗应用。SABIC LLDPE M500026产品说明M500026为线性低密度聚乙烯级，分子量分布窄，适用于注射成型应用。它被设计成具有更好的低温韧性、抗应力开裂性和光泽，具有优异的流动性能。通常情况下，M500026适用于瓶盖、容器、深拉家居用品、汽车零件等。 SABIC® LLDPE M500026 SABIC® LLDPE M500026 is a high flow, linear low density polyethylene copolymer injection moulding grade with a narrow molecular weight distribution. It has been typically designed to have good low temperature toughness, stress crack resistance (ESCR), mouldability and gloss. Typical applications. Injection Molding: SABIC® LLDPE M500026 is typically used for injection moulding of containers, reclosure lids and fast cycle, deep draw injection moulding applications, which takes advantage of its high flow properties. Also, the higher melting point of the material allows for high end-use temperature when compared with conventional polyethylenes of equal density. Masterbatch Compounding: SABIC® LLDPE M500026 resin is typically used for injection moulding masterbatch where a high filler acceptance is required combined with a good flow. This product is not intended for and must not be used in any pharmaceutical/medical applications. SABIC® LLDPE M500026 Product Description M500026 is Linear Low Density Polyethylene grade with narrow molecular weight distribution suitable for injection molding applications. It has been designed to give excellent flow properties with better low temperature toughness, stress crack resistance and gloss. Typical Applications M500026 is recommended for lids for closures and containers and deep draw houseware products, automotive parts etc.

产品描述
厂家：	沙特沙伯基础 SABIC	沙特沙伯基础 SABIC
类别：	LLDPE Linear low density polyethylene	LLDPE Linear low density polyethylene
填料：
用途：	复合,母料	家用货品,母料,容器,汽车领域的应用,复合,盖子
性能特点：	流动性高,窄分子量分布,低密度,共聚物 High liquidity,Weight distribution,Low density,Copolymer	易加工,表面光泽度好,流动性高,成型周期快,窄分子量分布,低密度,共聚物,耐低温韧性,抗应力开裂 Excellent Processability,Good surface appearance,High liquidity,Quick molding cycle,Weight distribution,Low density,Copolymer,Low temperature toughness,High ESCR
加工条件：	注射成型 Injection Molding	注射成型 Injection Molding