牌号简介 About |
---|
临时-聚丙烯均聚物用于双轴向薄膜PP 523P是一种非配方等级,专门为双轴向聚丙烯(BOPP)薄膜挤出开发,具有非常特殊的分子结构,提供了支架膜工艺所需的最终性能。PP523P适用于金属化薄膜,无论是单层还是共挤结构。使用PP 523P生产的薄膜将展示:一致的可加工性非常好的薄膜轮廓优良的光学性能高拉伸性能低残留灰膜可以金属化典型应用PP 523P可以用作共挤薄膜的核心层和/或用作固定、干燥食品袋、合成用的普通薄膜的基料。ETIC纸和热密封包装膜。 Provisional - PP Homopolymer for bi-axially oriented film PP 523P is a non formulated grade, specially developed for bi-axially oriented PP (BOPP) film extrusion with a very specific molecular structure providing ultimate properties required for the stenter film process. PP523P is suitable for metallizable film, both as monolayer and in coextruded structures. Films produced using PP 523P will exhibit: Consistent processability Very good film profile Excellent optical properties High tensile properties Low residual ash Film produced can be metalized Typical Applications PP 523P can be used as core layer in co-extruded film and/or as base material for plain films used for stationary, dry food bags, synthetic paper and heat sealable packaging films. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density 2 |
0.905 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
3.0 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,注塑成型 23 ℃, injection molding |
35 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
94.0 | ℃ | ASTM D648 |
维卡软化温度 Vicat Softening Temp |
156 | ℃ | ASTM D1525 3 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸强度 tensile strength |
|||
屈服,注塑成型 Yield, injection molding |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
屈服,注塑成型 Yield, injection molding |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
1% 正割,注塑成型 1% cut, injection molding |
MPa | ASTM D790-A |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 23°C |
3 标准 B (120°C/h) |
【新闻资讯】查看全部
中国塑料模具行业开展矛盾与妨碍
2016-09-08 现代工业对注塑件的要求不仅要求精度高,还需有极佳的内在质量,为适应这种要求,必须开发利用注塑模具新技术,目前在南方沿海地区正在逐步推广利用从国外引进的注塑模具新技术,对提高注塑件质量起了很大的作用。在这几十年来,国内塑料模具行业迅猛发展,对人才的渴求和要求也越来越高。但国内还是没法解决这棘手问题,成了中国模具行业发展的主要障碍。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |