Quadraplast™ AR 100是高性能芳香族热塑性硬质聚氨酯。该聚合物不透明,以小颗粒形式提供,便于加工。该材料具有优异的韧性、氧化稳定性、生物相容性、耐化学性、尺寸稳定性和键合性能。Quadrathane、Quadraflex、Quadraban和Quadraplast性能TPU聚合物主要用于生命科学和医疗应用,包括血管通路设备、外科用品、呼吸设备、气管切开术设备和其他医疗应用。典型的最终产品包括管子、导管部件、气球和各种医疗设备部件。Quadraplast很容易通过二次成型或溶剂粘合工艺粘合到Quadrathane和Quadraflex管道上。 Quadraplast™ AR 100 is high performance aromatic thermoplastic rigid polyurethane. The polymer is opaque and supplied in small pellets for ease of processing. The material exhibits excellent toughness, oxidative stability, biocompatibility, chemical resistance, dimensional stability, and bonding properties. Quadrathane™, Quadraflex™, Quadraban™ and Quadraplast™ performance TPU polymers are primarily used in life science and medical applications including vascular access devices, surgical supplies, respiratory devices, tracheotomy devices, and other medical applications. Typical end products include tubing, catheter parts, balloons, and various medical device components. Quadraplast™ is easily bonded to Quadrathane™ and Quadraflex™ tubing using over molding or solvent bonding processes.
基础树脂 Base Resin
产品描述
厂家:
美国Biomerics
美国RTP
类别:
TPU TPU
TPU TPU
填料:
用途:
外科器械,管件,医疗/护理用品,包覆成型,粘合
性能特点:
机械强度好,易加工,韧性好,尺寸稳定性好,芳香,生物兼容性,抗氧化,耐化学性,可粘结性 Good Rigidity,Excellent Processability,Good flexibility,Good Dimensional Stability,Aromatic,Biocompatible,Inoxidizability,Solvent resistance,Agglomerability
防火阻燃等级HB HB
加工条件:
注射成型 Injection Molding
注射成型 Injection Molding
技术参数
物理性能 PHYSICAL
Quadraplast™ AR 100
RTP 2300 A
单位 UNIT 测试方法 TEST METHOD
含水量
water content
%
密度
Density
g/cm³ASTM D792
收缩率(MD)
Shrinkage rate
%ASTM D955
收缩率(MD:3.2 mm)
Shrinkage rate
%ASTM D955
机械性能 MECHANICAL
Quadraplast™ AR 100
RTP 2300 A
单位 UNIT 测试方法 TEST METHOD
弯曲强度
bending strength
MPaASTM D790
弯曲模量
Bending modulus
MPaASTM D790
拉伸应变(屈服)
Tensile strain
%ASTM D638
拉伸应变(断裂)
Tensile strain
%ASTM D638
拉伸强度
tensile strength
MPaASTM D638
拉伸强度(断裂)
tensile strength
MPaASTM D638
拉伸模量
Tensile modulus
MPaASTM D638
洛氏硬度(R 级)
Rockwell hardness
ASTM D785
邵氏硬度(邵氏 D)
Shore hardness
ASTM D2240
冲击性能 IMPACT
Quadraplast™ AR 100
RTP 2300 A
单位 UNIT 测试方法 TEST METHOD
悬臂梁无缺口冲击强度(3.2 mm)
Notched impact strength of cantilever beam
J/mASTM D4812
悬臂梁缺口冲击强度(3.2mm)
Impact strength of cantilever beam notch
J/mASTM D256
热性能 THERMAL
Quadraplast™ AR 100
RTP 2300 A
单位 UNIT 测试方法 TEST METHOD
热变形温度(1.8 MPa,未退火)
Hot deformation temperature
℃ASTM D648
阻燃性能 FLAMMABILITY
Quadraplast™ AR 100
RTP 2300 A
单位 UNIT 测试方法 TEST METHOD