PA12，VESTAMID® L LX9009对比PA12，VESTAMID® Care ML94物性表,价格行情_搜料

牌号信息	VESTAMID® L LX9009 物性表 PA12 & 德国赢创指导价格：暂无塑料库存：缺货	VESTAMID® Care ML94 物性表 PA12 & 德国赢创指导价格：暂无塑料库存：缺货
牌号简介	未填充的Vestamid聚酰胺12化合物表征：中等粘度，光稳定应用：滑雪覆盖膜一般来说，可以说长链、半结晶的聚酰胺吸收很少的水，耐极性和非极性溶剂，具有低的蠕变行为和高的抗冲击性，可在较宽的温度下使用。距离范围。在这个价格范围内，几乎没有其他聚合物材料表现出这些特性。 Unfilled VESTAMID® polyamide 12 compounds Characterization: medium viscosity, light stabilized Applications: ski cover films In general, it can be said that long-chain, semi-crystalline polyamides absorb little water, are resistant to polar and non-polar solvents, exhibit low creep behavior and high impact resistance and can be used in a wide temperature range. Virtually no other polymer material in this price range exhibits these properties.	Vestamidcare ML等级涵盖了一系列不同粘度的聚酰胺12树脂，可通过挤压或注射成型进行加工。Vestamicare ML产品系列包括不稳定的基础树脂以及稳定或增强的化合物。维斯塔明护理ML树脂具有耐冲击、耐缺口冲击、尺寸稳定性好、滑动性能好、耐磨性高、耐化学品等优良性能。例如，未填充的Vestamid Care ML等级是导管和导管的首选材料，其中Vestamid Care ML材料在血管成形术球囊导管等应用中遇到了更高的挑战。增强型Vestamid Care ML等级的典型应用领域包括外壳部件、监控和成像设备以及耐用医疗设备。由于其低吸水性，填充维斯汀护理毫升级甚至抵制蒸汽高压灭菌超过500个周期。优点：高抗冲击性、高尺寸稳定性、高耐化学性、低滑动摩擦性、高韧性、高耐磨性、易加工性、着色性 VESTAMID®Care ML grades cover a range of polyamide 12 resins of different viscosity for processing via extrusion or injection molding. The VESTAMID®Care ML product range consists of unstabilized base resins as well as stabilized or reinforced compounds. VESTAMID® Care ML resins are characterized by several outstanding properties, such as high impact & notched impact resistance, dimensional stability, good sliding properties, high abrasion resistance and resistance against chemicals. Unfilled VESTAMID® Care ML grades are for example the materials of choice for catheters and tubings, where VESTAMID® Care ML materials meet even highest challenges in applications such as angioplasty balloon catheters. Typical areas of application for reinforced VESTAMID® Care ML grades include housing-parts, monitoring and imaging devices and durable medical equipment. Due to their low water uptake, filled VESTAMID® Care ML grades even resist steam autoclaving for more than 500 cycles. The advantages at a glance : High impact resistance High dimensional stability High chemical resistance Low sliding friction High toughness High abrasion resistance Easy processability & colorability

产品描述
厂家：	德国赢创 Evonik	德国赢创 Evonik
类别：	PA12 PA12	PA12 PA12
填料：
用途：	薄膜	管件,医疗器械,医疗/护理用品
性能特点：	耐候抗UV,易加工,冲击性能好,吸水率低,减震,低摩擦系数,食品接触,半结晶,耐疲劳性好,耐磨,耐油,耐化学性,耐低温冲击,热稳定性好,抗应力开裂,耐燃油 Weather resistance is good,Excellent Processability,High impact resistance,Low or no water absorption,noise reduction,Low coefficient of friction,Food contact compliance,Hypocrystalline,Fatigue resistance,Good wear resistance,Grease resistance,Solvent resistance,low-temperature impact resistance,Heat Stabilized,High ESCR,Fuel resistance	易加工,韧性好,冲击性能好,尺寸稳定性好,低摩擦系数,生物兼容性,耐磨,耐化学性,着色性好,防火阻燃等级HB Excellent Processability,Good flexibility,High impact resistance,Good Dimensional Stability,Low coefficient of friction,Biocompatible,Good wear resistance,Solvent resistance,Good coloring,HB
加工条件：	挤出 Extrusion	注射成型 Injection Molding

技术参数

物理性能
PHYSICAL VESTAMID® L LX9009 VESTAMID® Care ML94 单位
UNIT 测试方法
TEST METHOD

吸水率(平衡，23℃，50% RH)
Water absorption rate %

吸水率(饱和，23℃)
Water absorption rate %

密度
Density g/cm³ ISO 1183

收缩率(MD：2.0 mm)
Shrinkage rate %

收缩率(TD：2.0 mm)
Shrinkage rate %

机械性能
MECHANICAL VESTAMID® L LX9009 VESTAMID® Care ML94 单位
UNIT 测试方法
TEST METHOD

拉伸应变(屈服)
Tensile strain %

拉伸应变(屈服，23℃)
Tensile strain % ISO 527-2

拉伸应变(断裂)
Tensile strain %

拉伸强度(屈服)
tensile strength MPa

拉伸强度(屈服，23℃)
tensile strength MPa ISO 527-2

拉伸强度(断裂)
tensile strength MPa

拉伸模量
Tensile modulus MPa ISO 527-2

标称拉伸断裂应变(23℃)
Nominal tensile fracture strain % ISO 527-2

冲击性能
IMPACT VESTAMID® L LX9009 VESTAMID® Care ML94 单位
UNIT 测试方法
TEST METHOD

简支梁无缺口冲击强度(-30℃)
Charpy Unnotch Impact strength

简支梁无缺口冲击强度(23℃)
Charpy Unnotch Impact strength

简支梁缺口冲击强度(-30℃，完全断裂)
Charpy Notched Impact Strength kJ/m²

简支梁缺口冲击强度(23℃，完全断裂)
Charpy Notched Impact Strength kJ/m²

热性能
THERMAL VESTAMID® L LX9009 VESTAMID® Care ML94 单位
UNIT 测试方法
TEST METHOD

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃ ISO 75-2/B

热变形温度(1.8 MPa，未退火)
Hot deformation temperature ℃ ISO 75-2/A

熔融温度
Melting temperature ℃ ISO 11357-3

熔融温度(DSC)
Melting temperature ℃ ISO 11357

线性热膨胀系数(MD：23~55℃)
Linear coefficient of thermal expansion 1/℃ ISO 11359-2

维卡软化温度(--)
Vicat Softening Temp ℃ ISO 306/A

维卡软化温度(--)
Vicat Softening Temp ℃ ISO 306/B

补充信息
VESTAMID® L LX9009 VESTAMID® Care ML94 单位
UNIT 测试方法
TEST METHOD

ISO Shortname
ISO Shortname ISO 1874

阻燃性能
FLAMMABILITY VESTAMID® L LX9009 VESTAMID® Care ML94 单位
UNIT 测试方法
TEST METHOD

阻燃等级(1.60 mm)
Flame retardant level

阻燃等级(3.20 mm)
Flame retardant level

备注

2、2nd heating

1 一般属性：这些不能被视为规格。

2 2nd Heating


相关资讯

牌号简介
产品描述
技术参数
物理性能
机械性能
冲击性能
热性能
补充信息
阻燃性能
加工方式
备注
返回顶部

PA12，VESTAMID® L LX9009对比PA12，VESTAMID® Care ML94对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别