氟橡胶，Tecnoflon® TN对比氟橡胶，Cri-Line FDA-615-65-THK物性表,价格行情_搜料

牌号信息	Tecnoflon® TN 物性表氟橡胶 & 比利时索尔维指导价格：暂无塑料库存：缺货	Cri-Line FDA-615-65-THK 物性表氟橡胶 & 美国Cri-Tech 指导价格：暂无塑料库存：缺货
牌号简介	TECNOFLON® TN 是一种高粘度的氟弹性体三元共聚物。与含氟弹性共聚物相比，TN非常适合于需要具有更好的耐化学性和/或长期的耐热性能的产品。可以与Tecnoflon®家族的其它共聚物混合，以满足特定要求。TN不含硫化剂，因此应添加适当水平的Tecnoflon® FOR M1和Tecnoflon® FOR M2，以达到所需性能。也可以与二胺固化 Tecnoflon® TN 的一些基本特性： --杰出的耐化学性 -良好的压缩形变优异的脱模性能 -不会造成模内结垢 -出色的模内流动性 Tecnoflon® TN可用于模压和传递模塑成型轴密封件、阀杆密封件、O型环、垫圈、密封件和任何要求具有优异耐化学性的产品。Tecnoflon® TN 可以与固化系统和其它常规含氟弹性体配混材料混合。混合机械可用双辊研磨机或密炼机。可以挤塑成软管或型材，也可压延成片材或带材。成品可采用各种橡胶加工方法制备。 TECNOFLON® TN is a high viscosity fluoroelastomer terpolymer. TN is well suited for applications requiring better chemical resistance and/or long term heat resistance compared to fluoroelastomer copolymers. It can be blended with other polymers of the Tecnoflon® family to meet specific requirements. TN does not contain curatives, therefore the proper levels of Tecnoflon® FOR M1 and Tecnoflon® FOR M2 must be added to achieve required properties. It can also be cured with diamines. Some of the basic properties of TECNOFLON® TN are: Excellent chemical resistance Good compression set Excellent mould release Lack of mould fouling Superior mould flow Tecnoflon® TN can be used for compression and transfer molding of shaft seals, valve stem seals, O-rings, gaskets, seals or any item requiring excellent chemical resistance. Tecnoflon® TN can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.	66%氟共聚物，采用批准用于食品接触的复合成分配制（列出美国FDA 21 CFR 177.2600（c）（4）（1））。FDA化合物也有多种颜色。 66% Fluorine copolymers formulated with compounding ingredients approved for food contact (U.S. FDA 21 CFR 177.2600(c)(4)(1) listed). FDA compounds are also available in a variety of colors.

产品描述
厂家：	比利时索尔维 Solvay	美国Cri-Tech
类别：	氟橡胶氟橡胶	氟橡胶氟橡胶
填料：
用途：	垫圈,密封件,阀门/阀门部件,传送带修补,混合,型材,管道,片材
性能特点：	耐老化,高粘度,尺寸稳定性好,易流动,含脱模剂,耐化学性,三元共聚物 Good heat aging resistance,High Viscosity,Good Dimensional Stability,Good liquidity,Good stripping performance,Solvent resistance,Terpolymer	食品接触,共聚物 Food contact compliance,Copolymer
加工条件：	压缩模塑