3D打印材料，Lusin® Clean L 21 F对比3D打印材料，ALKAMIX™ MB-6002物性表,价格行情_搜料

牌号信息	Lusin® Clean L 21 F 物性表 3D打印材料 & 美国肯天指导价格：暂无塑料库存：缺货	ALKAMIX™ MB-6002 物性表 3D打印材料 & 澳大利亚凯诺斯指导价格：暂无塑料库存：缺货
牌号简介	基于有机溶剂效益的清洗剂去除聚合物残留物具有快速的清洗效果，NSF注册符合K1和K3清单要求描述Lusin® Clean L 21 F是一种有机清洗剂，特别适合去除金属表面的坚韧树脂和其他残留物。该产品应迅速使用。应用Lusin® Clean L 21 F用于清洁脏模具，并用于溶解聚合物残留物，例如PVC、POM、聚酰胺、丙烯酸酯等。在污染的模具上喷涂Lusin® Clean L 21 F，允许产品反应，然后通过生产部件去除它们（它们最初将显示受影响的表面）。在其他情况下，可以用布去除产品。 Cleaning Agent Based on Organic Solvents Benefits Removes polymer residues Has a rapid cleaning effect NSF registered conforms to K1 and K3 listing requirements Description Lusin® Clean L 21 F is an organic cleaning agent which is especially suitable to remove tenacious resin and other residues from metal surfaces. The product should be used rapidly. Application Lusin® Clean L 21 F is used for the cleaning of dirty moulds, and for the dissolution of polymer residues, e.g. PVC, POM, polyamides, acrylates, etc. Spray Lusin® Clean L 21 F on contaminated moulds, allow the product to react, then remove it by producing parts (they will initially show affected surfaces). In other cases the product can be removed by the use of a cloth.	ALKAMIX™ MB-6002是一种以25%的抗阻滞添加剂浓度配制的抗阻滞母粒。挤出过程中可在聚乙烯中加入ALKAMIX™ MB-6002，以降低薄膜的堵塞倾向。根据需要的属性，该级别可能会有所不同，但是建议的添加级别在1%到3%之间。当添加到不含任何抗阻塞添加剂的聚乙烯配方中时，根据良好的生产实践和确保符合美国食品和药品管理局法规CFR21要求的最大添加量为ALKAMIX™ MB-6002。转换器必须对使用该材料作为部件制造的成品的适用性以及对给定限制的遵守情况进行验证，以确保符合所有相关法规。整体迁移限制可适用于成品。 ALKAMIX™ MB-6002 is an Antiblock Masterbatch formulated with an antiblock additive concentration of 25 percent. ALKAMIX™ MB-6002 can be added to polyethylene during extrusion to reduce the blocking tendency of film. The level may vary according to desired properties, however the recommended addition level is between 1 and 3 percent. The maximum level of addition of ALKAMIX™ MB-6002 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 4 percent, when added to a polyethylene formulation free of any antiblock additives. The suitability of finished articles manufactured using this material as a component, and the observance of given limitations, must be verified by the converter for each application to ensure compliance with all relevant regulations. An overall migration limit may apply to the finished article.

产品描述
厂家：	美国肯天 Chem-Trend	澳大利亚凯诺斯 Qenos
类别：	3D打印材料 3D打印材料	3D打印材料 3D打印材料
填料：
用途：		母料
性能特点：		抗结块性 High anti-blocking
加工条件：