SABIC® LDPE 2308N0
LDPE & 沙特沙伯基础
SABIC® LDPE PCG09
LDPE & 沙特沙伯基础
牌号信息 |
LDPE & 沙特沙伯基础 指导价格:暂无 塑料库存: 缺货 |
LDPE & 沙特沙伯基础 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
SABIC® LDPE 2308N0是不含添加剂的低密度聚乙烯管级。SABIC® LDPE 2308N0采用SABIC清洁管式反应器(CTR)技术生产,确保产品纯度高。它具有高韧性、良好的柔韧性和合理的抗环境应力开裂性,因此通常用于柔韧性和坚硬物品。应用注射成型:SABIC® LDPE 2308N0通常适用于注射成型应用,常用于盖和封口。母料配制:SABIC® LDPE 2308N0通常用作母料和配制应用的载体树脂。本产品不适用于任何医药/医疗应用,也不得用于任何医药/医疗应用。 SABIC® LDPE 2308N0 is a LDPE tubular grade without additives. SABIC® LDPE 2308N0 is produced using SABIC Clean Tubular Reactor (CTR) Technology which ensure grades with high purity. It exhibits high toughness with good flexibility and reasonable environmental stress cracking resistance and is therefore typically used for flexibles and tough articles. Application Injection Molding: SABIC® LDPE 2308N0 is typically suitable for injection moulding application, frequently used for Caps & closures. Masterbatch Compounding: SABIC® LDPE 2308N0 is typically suitable as carrier resin for masterbatch and compounding applications. This product is not intended for and must not be used in any pharmaceutical/medical applications. |
SABIC LDPE PCG09是SABIC LDPE用于医疗应用牌号,在受控条件下生产,因此产品质量高、一致性好,纯度高。SABIC® LDPE PCG09是一种无添加剂牌号,通常设计用于医疗包装,通常可通过注射成型和铸膜转换,以生产瓶盖和瓶盖、小瓶子和二次包装。符合法规SABIC® LDPE PCG09符合欧洲药典(EP)和美国药典(USPVI)的相关专著。SABIC LDPE PCG09医疗保健用低密度聚乙烯说明:SABIC LDPE用于医疗保健的牌号在受控条件下生产,从而提高产品质量,符合柔弱和高纯度。SABIC® LDPE PCG09是一种无添加剂牌号,通常设计用于医疗包装,通常可通过注射成型和铸膜转换,以生产瓶盖和瓶盖、小瓶子和二次包装。符合法规SABIC® LDPE PCG09符合欧洲药典(EP)和美国药典(USPVI)的相关专著。本发明所述产品不得用于医疗保健设备或用于人体内临时或永久实施的材料。 SABIC® LDPE PCG09 SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG09 is an additive free grade, typically designed for healthcare packaging and can typically be converted by Injection Molding and Cast Film to produce caps and closures, small bottles and secondary packaging. Compliance to Regulations SABIC® LDPE PCG09 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). SABIC® LDPE PCG09 Low density polyethylene for Healthcare Description SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG09 is an additive free grade, typically designed for healthcare packaging and can typically be converted by Injection Molding and Cast Film to produce caps and closures, small bottles and secondary packaging. Compliance to Regulations SABIC® LDPE PCG09 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). The product mentioned herein may not be used for medical healthcare devices or materials intended for temporary or permanent implementation in the human body. |
|
产品描述 | |||
厂家: | 沙特沙伯基础 SABIC | 沙特沙伯基础 SABIC | |
类别: | LDPE LDPE | LDPE LDPE | |
填料: | |||
用途: | 复合,护罩,外壳,母料 | 流延薄膜,医用包装,瓶子,护罩,外壳,医疗/护理用品 | |
性能特点: | 韧性好,高纯度,低密度,抗应力开裂 Good flexibility,High purity,Low density,High ESCR | 高纯度,低密度 High purity,Low density | |
加工条件: | 复合 | 注射成型 Injection Molding |
备注 |
1 一般属性:这些不能被视为规格。
|
1 一般属性:这些不能被视为规格。
2 Conditioning of test specimen: temp. 23 °C, relative humidity 50 %, 24 hours
|
价格走势对比图
LDPE SABIC® LDPE 2308N0
LDPE SABIC® LDPE PCG09
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交