热固性聚酯，LTM® 110 series对比热固性聚酯，LTM® 123物性表,价格行情_搜料

牌号信息	LTM® 110 series 物性表热固性聚酯 & 美国氰特指导价格：暂无塑料库存：缺货	LTM® 123 物性表热固性聚酯 & 美国氰特指导价格：暂无塑料库存：缺货
牌号简介	LTM110系列预浸料是一种高工作温度的氰酸酯树脂系统，能够在低至70°C（158°F）的温度下进行初始固化。在适当的后固化后，玻璃转变温度可以增加到最大330°C（626°F），从而允许组件承受持续时间短的热峰值，直到该温度。LTM110系列部件预浸料是专门为在宽温度范围内需要最佳尺寸稳定性的应用而开发的，并且不提供适合高温高压釜固化的工具。 LTM110 series prepregs are high service temperature cyanate ester resin system capable of initial cure at temperatures as low as 70°C (158°F). After a suitable post-cure, the glass transition temperature can be increased to a maximum of 330°C (626°F), thus allowing components to withstand short duration thermal spikes up to this temperature. LTM110 series component prepregs have been specifically developed for applications where the best dimensional stability is required over a wide temperature range, and where tooling suitable for high temperature autoclave curing is not available.	LTM123是一种低温固化、增韧的氰酸酯组分预浸料，专为需要在空间环境中具有极限尺寸稳定性的结构应用而开发。它的低吸湿性和低介电常数特性也使其适用于天线罩和雷达吸波结构。LTM123也适用于赛车市场中的高工作温度结构应用。LTM123可采用高压釜和烘箱真空袋法加工，以产生低空隙率的复合材料，并且可以用一系列低成本模具进行成型，对结构尺寸几乎没有限制。对于空间应用，LTM® 123在80°C（176°F）的最低初始固化和120°C（248°F）的独立后固化后，可产生140°C（284°F）的Tg；对于赛车运动应用，LTM® 123在80°C（176°F）的最低初始固化和240°C（464°F）的独立后固化后，可产生250°C（482°F）的Tg。 LTM123 is a low temperature curing, toughened cyanate ester component prepreg developed for structural applications requiring ultimate dimensional stability in a space environment. Its low moisture absorption and low electrical permittivity characteristics also make it suitable for radomes and radar absorbing structures. LTM123 is also suitable for high service temperature structural applications in the motorsport market. LTM123 can be processed using autoclave and oven vacuum bag methods to produce low voidage composites and can be moulded off a range of low cost tooling with few constraints on structure dimensions. For space applications, LTM 123 can develop a Tg of 140°C (284°F) after a minimum initial cure at 80°C (176°F) and a free-standing post-cure of 120°C (248°F) For motorsport applications, LTM 123 can develop a Tg of 250°C (482°F) after a minimum initial cure at 80°C (176°F) and free-standing post-cure of 240°C (464°F)

产品描述
厂家：	美国氰特 Cytec Industries	美国氰特 Cytec Industries
类别：	热固性聚酯热固性聚酯	热固性聚酯热固性聚酯
填料：	玻璃纤维/芳族聚酰胺纤维/碳纤维	玻璃纤维/芳族聚酰胺纤维/碳纤维
用途：	粘合,模具	航空航天应用,汽车领域的应用
性能特点：	低烟,尺寸稳定性好,阻燃,耐高温,加热硫化,耐高压加热性 Low smoke,Good Dimensional Stability,Flame Characteristics,High Heat Resistance,Baking,High pressure heat resistance	韧性好,尺寸稳定性好,耐高温,防潮,加热硫化,耐高压加热性 Good flexibility,Good Dimensional Stability,High Heat Resistance,Moisture resistance,Baking,High pressure heat resistance
加工条件：