NEOFLON™ NP-101
FEP & 日本大金氟化工
Teflon® FEP 106
FEP & 美国科慕
牌号信息 |
FEP & 日本大金氟化工 指导价格:暂无 塑料库存: 缺货 |
FEP & 美国科慕 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
Neoflon NP-101超高速挤出树脂,用于电线和电缆绝缘,以提高生产率。Neoflon NP-101 Neoflon FEP是四氟乙烯和六氟丙烯的熔融加工全氟共聚物。FEP具有优异的电性能,如聚四氟乙烯,因为FEP仅由氟原子和碳原子组成。其耐化学性能和力学性能与PFA相同,但耐热性低于PFA。特点改进了熔体流动性。最适合高速电线涂层,如局域网电缆。 Neoflon® FEP NP-101 was developed for high-speed extrusion of thin coatings of small wire sizes such as plenum cable insulation. It may also be used for small tubing and injection molding of thin wall parts. |
出于库存控制目的,产品名称后面可以跟一个X。标记为FEP 106和FEP 106 X的产品是等效的,本文件中的所有信息都适用于这两者。典型应用:小直径、薄壁电线和电缆绝缘。通过注射成型制造的复杂或薄壁零件。杜邦Teflon® FEP 106是一种不含添加剂的四氟乙烯和六氟丙烯的熔融加工共聚物,符合ASTM D 2116 II型的要求。它提供了特氟隆氟聚合物树脂的优良特性组合:无老化特性、化学惰性、优异的介电性能、耐热性、韧性和柔韧性、低摩擦系数、不粘特性、可忽略的吸湿性、低可燃性、在温度下的性能。极端气候条件和良好的耐候性。Teflon® FEP 106是特氟隆FEP的“高生产率”等级。它是专为挤压薄壁,小直径电线绝缘。也可用于复杂和薄壁零件的注塑成型。在加工温度下,它显示出低粘度和高临界剪切速率。在类似的线结构中,它可以以比通用级特氟隆FEP 100更高的挤出线速度挤出。应力抗裂性是确定最终使用性能的重要因素。经验表明,在树脂薄膜上进行的MIT耐折性或弯曲寿命试验与广泛的电缆试验建立了良好的相关性。MIT的弹性寿命越高,树脂的应力开裂抗力越高。麻省理工学院的测试结果应被视为不同等级树脂比较性能的指南。我们建议,对于涉及重复热循环和弯曲循环的应用,应始终对最终电缆进行特定测试。另请参见杜邦公告“电线和电缆应用的等级选择器”。 For inventory control purposes product name may be followed by an X. Products labeled FEP 106 and FEP 106 X are equivalent and all information in this document is applicable to both. Typical Application Small diameter, thin wall wire and cable insulations. Intricate or thin wall parts made by injection moulding. DuPont Teflon® FEP 106 is a melt-processible copolymer of tetrafluoroethylene and hexafluoropropylene without additives that meets the requirements of ASTM D 2116 type II. It offers the excellent combination of properties characteristic of Teflon® fluoropolymer resins: non-ageing characteristics, chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes and excellent weather resistance. Teflon® FEP 106 is a "high productivity" grade of Teflon® FEP. It is designed for the extrusion of thin wall, small diameter wire insulations. It can also be used for injection moulding of intricate and thin wall parts. At processing temperatures it shows low viscosity and a high critical shear rate. In similar wire constructions it can be extruded at higher extrusion line speeds than the general purpose grade Teflon® FEP 100. Stress-crack resistance is an important element in establishing end-use performance. Experience shows that the MIT folding endurance or flex life test, performed on a thin film of resin, has established a good correlation with extensive cable testing. The higher the MIT flex life, the higher the stress-crack resistance of the resin. MIT test results should be viewed as a guide to comparative performance of the various grades of resin. We recommend that for applications involving repeated thermal and flex cycling, specific tests on the final cable always should be undertaken. See also DuPont's bulletin "Grade selector for Wire and Cable applications". |
|
产品描述 | |||
厂家: | 日本大金氟化工 Daikin Fluorochemicals | 美国科慕 Chemours | |
类别: | FEP FEP | FEP FEP | |
填料: | |||
用途: | 电线护套,电线电缆应用 | 电线电缆应用,绝缘材料,薄壁包装 | |
性能特点: | 电气性好,共聚物 Good Electrical Properties,Copolymer | 耐候抗UV,韧性好,低粘度,低摩擦系数,食品接触,耐高温,共聚物,耐化学性,低吸湿性,防火阻燃等级V-0 Weather resistance is good,Good flexibility,Low Viscosity,Low coefficient of friction,Food contact compliance,High Heat Resistance,Copolymer,Solvent resistance,Low moisture absorption,V-0 | |
加工条件: | 挤出 Extrusion | 吹塑成型 |
备注 |
1 一般属性:这些不能被视为规格。
|
1 一般属性:这些不能被视为规格。
2 The continuous service temperature is based on accelerated heat-aging tests, and represents the temperature at which tensile strength and ultimate elongation retains 50% of the original values, after 20 000 h thermal aging When considering the use of Teflon ® FEP at elevated temperatures especially in combination with mechanical, electrical or chemical exposure, preliminary testing should be done to verify suitability.
3 ASTM D4591 / D3418
4 方法A(短时间)
5 - These results are based on laboratory tests, under controlled conditions, and do not reflect performance under actual fire conditions. - Current rating is a typical theoretical value
|
价格走势对比图
FEP NEOFLON™ NP-101
FEP Teflon® FEP 106
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交