LDPE，NEXUS PE LDPE-0719对比LDPE，ALCUDIA® LDPE PE-071物性表,价格行情_搜料

牌号信息	NEXUS PE LDPE-0719 物性表 LDPE & 美国Nexus 指导价格：暂无塑料库存：缺货	ALCUDIA® LDPE PE-071 物性表 LDPE & 西班牙莱普索尔指导价格：暂无塑料库存：缺货
牌号简介	用于吹塑薄膜应用的低密度聚乙烯nexus ldpe-0719是为需要高冲击强度和良好降深的工业薄膜而设计的。提供各种防滑和防阻塞包装。 Low Density Polyethylene for blown film applications Nexus LDPE-0719 is designed for industrial films where high impact strength and excellent drawdown are needed. Available in various slip and antiblock packages.	Alcudia PE071是一种低密度聚乙烯级材料，采用高压高压釜技术生产，特别适用于挤出涂层。这种材料在易加工性、良好的感官性能、良好的粘附性和低颈缩之间提供了充分的平衡。它不含任何添加剂。典型应用挤压涂层。共挤薄膜。注塑成型。Alcudia PE-071具有优异的拉伸性能，可在330°C的最高挤出温度下高速喷涂，最高可达850 m/m in和5 g/m²。这种材料在各种挤出条件下具有很低的颈部。挤出涂层的推荐熔融温度范围为275至330°C。共挤温度范围取决于加工聚合物。各生产线的加工条件应得到优化。 ALCUDIA® PE071 is a low density polyethylene grade, produced by high pressure autoclave technology, especially intended for extrusion coating. This material offers an adequate balance between easy processability, good organoleptic properties, excellent adhesion and low neck-in. It does not contain any additives. TYPICAL APPLICATIONS Extrusion coating. Coextruded thin film. Injection moulding. The excellent draw down properties of ALCUDIA® PE-071 allow high-speed coatings, up to 850 m/min and 5 g/m² at a maximum extrusion temperature of 330°C. This material has a very low neck-in throughout a wide range of extrusion conditions. Recommended melt temperature range for extrusion coating from 275 to 330°C. Temperature range for coextrusion depending on the processed polymers. Processing conditions should be optimised for each production line.

产品描述
厂家：	美国Nexus	西班牙莱普索尔 REPSOL
类别：	LDPE LDPE	LDPE LDPE
填料：
用途：	薄膜,工业应用	涂层应用
性能特点：	冲击性能好,易剥离 High impact resistance,Good dissection	易加工,内缩量低,食品接触,粘结性好,感官性好 Excellent Processability,Low shrinkage,Food contact compliance,Good bond,Good sensory characteristics.
加工条件：	吹塑薄膜	注射成型 Injection Molding