其他TPE合金，Prime Tuff-X STF对比其他TPE合金，Softflex® ASA 2910物性表,价格行情_搜料

牌号信息	Prime Tuff-X STF 物性表其他TPE合金 & 美国Primex Plastics 指导价格：暂无塑料库存：缺货	Softflex® ASA 2910 物性表其他TPE合金 & 荷兰利安德巴塞尔指导价格：暂无塑料库存：缺货
牌号简介	该产品由热塑性弹性体皮层压到封闭单元，交联聚烯烃泡沫，然后层压到我们的tuff-X刚性基板。低光泽和柔软的手感，消除了对软触摸涂料的需求。（成型后小于5%）它也有助于消除止血药特有的吱吱声和嘎吱声。在不损失性能的情况下，可回收未上漆的废料。应用：TUFF-X STF是理想的内部和外部部件，包括中控台、仪表板、门板和许多其他部件。这满足了客户对低光泽、柔软触感材料的需求，以软化农业设备、船舶、重型卡车、房车和其他市场中的内外部应用，同时使用热塑性可回收材料。加工：Prime Tuff-X STF可采用标准成型设备成型。泡沫/皮肤侧不应形成在工具上。辐射热效果最好，首选区域控制陶瓷或石英加热器。跳动或凸缘区域应大于腹肌或臀部的尺寸。基材应达到正常的成形温度，但泡沫不应超过310°F。整理：TUFF-X STF可以用钢制规则或硬模具制造，加热的刀具或工具也可以工作，但是不推荐布线和锯切。机械螺钉和紧固件以及3M公司开发的一些粘合剂可用于粘合。请与Primex塑料公司代表联系，了解有关表面处理、制造或热成型工艺的更多信息。颜色、纹理和功能：Primex通常提供那不勒斯和皮革纹理，以及由浅色和深色、棕褐色和灰色组成的四种颜色。自定义颜色匹配可用，但订单尺寸必须经过批准。 This product consists of a Thermoplastic elastomer skin laminated to closed-cell, cross-linked polyolefin foam that is then laminated to our Tuff-X rigid substrate. Low gloss and soft feel eliminate the need for soft-touch paint. (<5% after forming) It also helps eliminate the squeak and rattle that is characteristic of Styrenics. Recycling of unpainted scrap is possible with no loss of properties. Applications: Tuff-X STF is ideal for interior and exterior components, including center consoles, instrument panels, door panels, and many others. This addresses the customers' desire for a low-gloss, soft feel material to soften interior and exterior applications in markets such as agricultural equipment, marine, heavy trucks, RV cabs, and others, while utilizing a thermoplastic, recyclable material. Processing: Prime Tuff-X STF can be formed using standard forming equipment. The foam/skin side should not be formed against the tool. Radiant heat works best, Zone controlled ceramic or quartz heaters are preferred. The run out or flange area should be greater than what is figured for ABS or HIPS. The substrate should reach normal forming temperature but the foam should not exceed 310°F. Finishing: Tuff-X STF can be fabricated by using steel rule or hard dies, heated knives or tooling will also work, however, routing and sawing is not recommended. Mechanical screws and fasteners, as well as some adhesives that have been developed by 3M, may be used for bonding. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: Primex typically offers a Naples and Leather texture and four colors consisting of light and dark, tan and gray. Custom color matching is available but order sizes must be approved.	Softflex® ASA 2910是一种热塑性弹性体合金(TPE合金)产品,。它可以通过共挤出成型进行加工,在北美洲有供货。 Softflex® ASA 2910的应用领域包括海洋应用、汽车行业和体育用品。 Softflex® ASA 2910 is a Thermoplastic Elastomer Alloy (TPE Alloy) product. It can be processed by coextrusion and is available in North America. Applications of Softflex® ASA 2910 include automotive, marine applications and sporting goods.

产品描述
厂家：	美国Primex Plastics	荷兰利安德巴塞尔 LyondellBasell
类别：	其他TPE合金其他TPE合金	其他TPE合金
填料：
用途：	汽车仪表板,船舶应用,农业应用,泡沫,汽车内部零件	汽车领域的应用,船舶应用,体育用品
性能特点：	冲击性能好,可交联,可回收,发泡性好,耐高温,拉伸性能好,柔软性好,耐低温冲击,低光泽 High impact resistance,Crosslinked,Renewable resources,Foaming performance,High Heat Resistance,Good Tensile Strength,Soft,low-temperature impact resistance,Low Gloss
加工条件：	热成型 Thermo forming	共挤出成型

技术参数

物理性能
PHYSICAL Prime Tuff-X STF Softflex® ASA 2910 单位
UNIT 测试方法
TEST METHOD

密度
Density g/cm³ ASTM D792

密度
Density g/cm³ ISO 1183

收缩率
Shrinkage rate % ISO 294-4

收缩率(MD：3.2 mm)
Shrinkage rate %

收缩率(TD：3.2 mm)
Shrinkage rate %

熔体质量流动速率(200℃，5.0kg)
Melt Flow Rate g/10min ASTM D1238

冲击性能
IMPACT Prime Tuff-X STF Softflex® ASA 2910 单位
UNIT 测试方法
TEST METHOD

落锤冲击(23℃)
Drop hammer impact J ASTM D5420

装有测量仪表的落镖冲击(-15℃，Total Energy)
Dart impact equipped with measuring instruments J ASTM D3763

装有测量仪表的落镖冲击(23℃，Total Energy)
Dart impact equipped with measuring instruments J ASTM D3763

热性能
THERMAL Prime Tuff-X STF Softflex® ASA 2910 单位
UNIT 测试方法
TEST METHOD

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃ ISO 75-2/B

热变形温度(1.8 MPa，未退火)
Hot deformation temperature ℃ ISO 75-2/A

线性热膨胀系数(MD)
Linear coefficient of thermal expansion 1/℃

机械性能
MECHANICAL Prime Tuff-X STF Softflex® ASA 2910 单位
UNIT 测试方法
TEST METHOD

弯曲模量
Bending modulus MPa ISO 178

拉伸强度(屈服)
tensile strength MPa ISO 527-2

泰伯耐磨性(1000 周期，1000 g，H-22 转轮)
Taber abraser mg ASTM D3389

邵氏硬度(邵氏 A)
Shore hardness

邵氏硬度(邵氏 A)
Shore hardness ISO 868

邵氏硬度(邵氏 A，10 秒)
Shore hardness

薄膜
Prime Tuff-X STF Softflex® ASA 2910 单位
UNIT 测试方法
TEST METHOD

剥离强度(90°)
peel strength kN/m ASTM D429

弹性体
ELASTOMER Prime Tuff-X STF Softflex® ASA 2910 单位
UNIT 测试方法
TEST METHOD

压缩形变(100℃，22 hr)
Compression deformation %

压缩形变(23℃，22 hr)
Compression deformation %

压缩形变(70℃，22 hr)
Compression deformation %

拉伸应变(断裂)
Tensile strain % ASTM D412

拉伸强度(100% 应变)
tensile strength MPa

拉伸强度(300% 应变)
tensile strength MPa

拉伸强度(50% 应变)
tensile strength MPa

拉伸强度(屈服)
tensile strength MPa ASTM D412

拉伸永久变形(100% 应变)
Tensile permanent deformation % ASTM D412

撕裂强度
tear strength kN/m ASTM D624

补充信息
Prime Tuff-X STF Softflex® ASA 2910 单位
UNIT 测试方法
TEST METHOD

Overmold Bonding
Overmold Bonding

备注

1 一般属性：这些不能被视为规格。

2 50% ductile

3 Skin

4 Substrate

2、程序 A

3、510 mm/min


相关资讯

牌号简介
产品描述
技术参数
物理性能
冲击性能
热性能
机械性能
薄膜
弹性体
补充信息
加工方式
备注
返回顶部

其他TPE合金，Prime Tuff-X STF对比其他TPE合金，Softflex® ASA 2910对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别