PP均聚，Jampilen HA840R对比PP均聚，CERTENE™ PHM-20AN物性表,价格行情_搜料

牌号信息	Jampilen HA840R 物性表 PP均聚 & 伊朗Jam Polypropylene 指导价格：暂无塑料库存：缺货	CERTENE™ PHM-20AN 物性表 PP均聚 & 美国Channel Prime Alliance 指导价格：暂无塑料库存：缺货
牌号简介	Jampilen HA840R是一种特殊的聚丙烯类型，具有极高的硬度和高光泽。它特别用于生产需要高刚性的注塑制品。Jampilen HA840R的典型应用包括食品包装容器、家庭用品、小电器和技术部件。该产品的成分符合FDA规范和欧洲主要国家有关食品接触应用的规定。 Jampilen HA840R is a special polypropylene type which features an extremely high stiffness and high gloss. It has been especially developed for the production of stiff injection molded articles where high rigidity is needed. Typical applications of Jampilen HA840R include food packaging containers, housewares, small appliances and technical parts. The composition of the product complies well with FDA norms and with regulations concerning food contact applications in major European countries.	certene phm-20an phm-20an是一种经认证的优质有核聚丙烯，设计用于薄壁轻质制品的注塑成型。PHM-20AN含有抗静电成分，具有良好的中高流量加工平衡性、高接触清晰度、良好的拉伸强度、高刚度、短循环和优异的ESCR。PHM-20AN应用包括轻型容器、医疗用品、瓶盖、瓶盖和家庭用品。PHM-20建议的加工温度在220°到240°C之间，模具温度在20°到50°C之间。PHM-20AN符合FDA法规21CFR 177.1520和大多数有关在食品接触中使用聚丙烯的国际法规。 CERTENE™ PHM-20AN PHM-20AN is a certified prime grade Nucleated Polypropylene designed for injection molding of thin-walled lightweight articles. PHM-20AN contains antistatic and combines a good balance of medium-high flow processability with high contact clarity, good tensile strength, high stiffness, short cycling, and excellent ESCR. PHM-20AN applications include lightweight containers, medical ware, caps, closures, and housewares. PHM-20AN recommended processing temperature is between 220° to 240°C with mold at 20°-50°C. PHM-20AN complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use of Polypropylene in contact with food. CERTENE™ PHM-20AN PHM-20AN is a certified prime grade Nucleated Polypropylene designed for injection molding of thin-walled lightweight articles. PHM-20AN contains antistatic and combines a good balance of medium-high flow processability with high contact clarity, good tensile strength, high stiffness, short cycling, and excellent ESCR. PHM-20AN applications include lightweight containers, medical ware, caps, closures, and housewares. PHM-20AN recommended processing temperature is between 220° to 240°C with mold at 20°-50°C. PHM-20AN complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use of Polypropylene in contact with food.

产品描述
厂家：	伊朗Jam Polypropylene	美国Channel Prime Alliance
类别：	PP均聚 PP homopolymerization	PP均聚 PP homopolymerization
填料：
用途：	食品容器,家具,大型家用电器和小型家用电器,工程配件,外壳,护罩,家用货品	护罩,薄壁容器,家用货品,医疗/护理用品
性能特点：	机械强度好,表面光泽度好,食品接触,均聚物 Good Rigidity,Good surface appearance,Food contact compliance,Homopolymer	机械强度好,易加工,透光性好,流动性高,成核的,成型周期快,食品接触,拉伸性能好,抗静电,抗应力开裂,均聚物 Good Rigidity,Excellent Processability,Good Clarity,High liquidity,Nucleation,Quick molding cycle,Food contact compliance,Good Tensile Strength,Antistatic property,High ESCR,Homopolymer
加工条件：	注射成型 Injection Molding	注射成型 Injection Molding

技术参数

物理性能
PHYSICAL Jampilen HA840R CERTENE™ PHM-20AN 单位
UNIT 测试方法
TEST METHOD

密度
Density g/cm³ ASTM D1505

熔体质量流动速率(230℃，2.16kg)
Melt Flow Rate g/10min ASTM D1238

冲击性能
IMPACT Jampilen HA840R CERTENE™ PHM-20AN 单位
UNIT 测试方法
TEST METHOD

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch J/m ASTM D256

悬臂梁缺口冲击强度(23℃，注塑成型)
Impact strength of cantilever beam notch J/m ASTM D256

热性能
THERMAL Jampilen HA840R CERTENE™ PHM-20AN 单位
UNIT 测试方法
TEST METHOD

加速干燥箱老化(150℃)
Accelerate oven aging hr ASTM D3012

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

热变形温度(0.45 MPa，未退火，注塑成型)
Hot deformation temperature ℃ ASTM D648

维卡软化温度
Vicat Softening Temp ℃ ASTM D1525

维卡软化温度
Vicat Softening Temp ℃ ASTM D1525 1

光学性能
OPTICAL Jampilen HA840R CERTENE™ PHM-20AN 单位
UNIT 测试方法
TEST METHOD

光泽度(60°)
gloss ASTM D2457

雾度(1000 µm)
Haze % ASTM D1003

机械性能
MECHANICAL Jampilen HA840R CERTENE™ PHM-20AN 单位
UNIT 测试方法
TEST METHOD

弯曲模量
Bending modulus MPa ASTM D790

弯曲模量(1% 正割，注塑成型)
Bending modulus MPa ASTM D790

拉伸应变(屈服)
Tensile strain % ASTM D638

拉伸应变(屈服，注塑成型)
Tensile strain % ASTM D638

拉伸强度(屈服)
tensile strength MPa ASTM D638

拉伸强度(屈服，注塑成型)
tensile strength MPa ASTM D638

洛氏硬度(R 级)
Rockwell hardness ASTM D785

加工方式

注射 Jampilen HA840R CERTENE™ PHM-20AN 单位测试方法

加工熔体温度 °C

模具温度 °C

备注

1 一般属性：这些不能被视为规格。

2 压力1 (10N)

1 一般属性：这些不能被视为规格。

2 2.0 in/min

3 0.051 in/min


相关资讯

牌号简介
产品描述
技术参数
物理性能
冲击性能
热性能
光学性能
机械性能
加工方式
注射
备注
返回顶部

PP均聚，Jampilen HA840R对比PP均聚，CERTENE™ PHM-20AN对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别