DAPCO™ 3012
&
Ebalta LH 28-1 / TM
&
牌号信息 |
& 指导价格:暂无 塑料库存: 缺货 |
& 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
DAPCO™ 3012是一种双组分自熄环氧填料。建议应用:DAPCO™ 3012通常用于蜂窝芯的灌封/加固和边缘填充。它还用于连接Kydex、Kevlar、玻璃纤维和金属,并插入安装。 DAPCO™ 3012 is a two-component, self-extinguishing epoxy filler. Suggested Applications: DAPCO 3012 is commonly used for potting/stiffening and edge filling in honeycomb core. It is also used for bonding Kydex™, Kevlar™, fiberglass and metal to each other and insert installation. |
Ebarta lh 28-1是一种双组分环氧复合树脂,在室温下预固化,根据后固化的不同,可使用到175°C。由于该复合树脂系统不含填料,因此具有良好的润湿性能,并使玻璃纤维含量高成为可能。这导致了低热膨胀系数和高强度。与铝颗粒一起,Ebarta LH 28-1适用于耐热模具和模具的背面填充。在室温下固化需要7天,材料只能用于60°C的应用。应用真空成型工具预浸工具热粘合工具吹塑模具聚酯注塑模具聚酯冲压工具性能非常高,取决于后固化到175°C长的处理时间低放热特性热固化 ebalta LH 28-1 is a two components epoxy laminating resin, precuring at room temperature and, depending on postcuring, can be used till 175°C. Since this laminating resin system contains no fillers, it has got good wetting properties and makes a high glass fabric content possible. This leads to a low coefficient of thermal expansion and high strength. Together with aluminium granules, ebalta LH 28-1 is suitable for back filling of heat resistant moulds and moulding tools. At room temperature the curing takes 7 days and the material can only be used for applications till 60°C. Applications Vacuum forming tools Prepreg tools hot gluing tools Blow moulds Polyester injection moulds Polyester press tools Properties very high heat resistance, depending on post curing till 175°C long processing time low exothermic character heat curing |
|
产品描述 | |||
厂家: | |||
类别: | |||
填料: | |||
用途: | |||
性能特点: | |||
加工条件: |
备注 |
2 3 seconds
|
1 一般属性:这些不能被视为规格。
2 200 g
|
价格走势对比图
DAPCO™ 3012
Ebalta LH 28-1 / TM
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交