PET，MadeSolid PET+对比PET，Ensinger TECAPET®物性表,价格行情_搜料

牌号信息	MadeSolid PET+ 物性表 PET & 美国MadeSolid 指导价格：暂无塑料库存：缺货	Ensinger TECAPET® 物性表 PET & 德国恩欣格指导价格：暂无塑料库存：缺货
牌号简介	聚酯+长丝工程级优质长丝，平衡了优越的机械性能和易用性，弹性强度比ABS或PLA更具弹性。适用于1.75毫米和3毫米尺寸的可穿戴设备和原型通用兼容性，PET+适用于大多数FFF打印机。特点：坚固灵活100%可回收易粘疏水 PET+ Filament Engineering Grade High quality filament that balances superior mechanical properties and ease of use Flexible Strength More flexible strength than ABS or PLA. Excellent for Wearables and Prototypes Universal Compatibility 1.75mm and 3mm sizes, PET+ is suitable for most FFF Printers. Features: Strong and Flexible 100% Recyclable Easy Adhesion Hydrophobic	Tecapetpet是一种从聚对苯二甲酸乙二醇酯衍生而来的无增强半结晶热塑性聚酯。其优异的耐磨性、低摩擦系数、高弯曲模量和优越的尺寸稳定性使其成为设计机械和机电零件的通用材料。由于Tecapetpet没有中心孔，因此几乎消除了流体吸收和泄漏的可能性。Tecapetpet优越的耐磨性和中心线孔的缺乏使其在涉及溶剂、化学品和食品的应用方面优于其他材料。Tecapetpet还用于水净化系统、印刷设备、纺织部件、食品处理设备和阀门。 TECAPET®PET is an unreinforced, semicrystalline thermoplastic polyester derived from polyethylene terephthalate. Its excellent wear resistance, low coefficient of friction, high flexural modulus, and superior dimensional stability make it a versatile material for designing mechanical and electro-mechanical parts. Because TECAPET®PET has no centerline porosity, the possibility of fluid absorption and leakage is virtually eliminated. TECAPET™PET superior wear resistance and lack of centerline porosity give it an advantage over other materials for applications involving solvents, chemicals, and food products. TECAPET™PET is also used in water purification systems, printing equipment, textile components, food-handling equipment, and valves. Excellent wear resistance Low coefficient of friction Very good chemical resistance No centerline porosity eliminates the possibility of fluid absorption and leakage Good electrical insulator High mechanical strength Excellent hardness and stiffness Good weather resistance Low water absorption Good resistance to high-energy radiation

产品描述
厂家：	美国MadeSolid	德国恩欣格 Ensinger
类别：	PET PET	PET PET
填料：
用途：	成型	印刷机零件,阀门/阀门部件,食品服务领域,纺织应用
性能特点：	机械强度好,韧性好,疏水性,可回收,粘结性好,防火阻燃等级HB,防火阻燃等级V-2 Good Rigidity,Good flexibility,Hydrophobic,Renewable resources,Good bond,HB,V-2	机械强度好,耐候抗UV,尺寸稳定性好,吸水率低,硬度高,抗伽马射线,低摩擦系数,食品接触,半结晶,耐磨,耐化学性,绝缘,防火阻燃等级HB Good Rigidity,Weather resistance is good,Good Dimensional Stability,Low or no water absorption,Good Hardness,Gamma radiation,Low coefficient of friction,Food contact compliance,Hypocrystalline,Good wear resistance,Solvent resistance,Insulation,HB
加工条件：	3D Printing, Fused Filament Fabrication (FFF)

技术参数

物理性能
PHYSICAL MadeSolid PET+ Ensinger TECAPET® 单位
UNIT 测试方法
TEST METHOD

吸水率(23℃，24hr)
Water absorption rate % ASTM D570

吸水率(平衡)
Water absorption rate %

吸水率(饱和，23℃)
Water absorption rate % ASTM D570

密度
Density g/cm³ ASTM D792

冲击性能
IMPACT MadeSolid PET+ Ensinger TECAPET® 单位
UNIT 测试方法
TEST METHOD

Impact Resistance(Energy)
Impact Resistance（Energy） N

悬臂梁无缺口冲击强度
Notched impact strength of cantilever beam J/m

悬臂梁无缺口冲击强度(23℃)
Notched impact strength of cantilever beam J/m ASTM D256

热性能
THERMAL MadeSolid PET+ Ensinger TECAPET® 单位
UNIT 测试方法
TEST METHOD

最高使用温度(Intermittent)
Maximum operating temperature ℃

最高使用温度(长期)
Maximum operating temperature ℃ UL 746B

比热
specific heat J/kg/℃

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

热变形温度(1.8 MPa，未退火)
Hot deformation temperature ℃

热变形温度(1.8 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

熔融峰值温度
Melting peak temperature ℃ ASTM D3418

玻璃化转变温度
Glass transition temperature ℃

线性热膨胀系数(MD)
Linear coefficient of thermal expansion 1/℃ ASTM D696

维卡软化温度
Vicat Softening Temp ℃

电气性能
ELECTRICAL MadeSolid PET+ Ensinger TECAPET® 单位
UNIT 测试方法
TEST METHOD

介电常数(23 ℃，60 Hz)
Dielectric constant ASTM D150

介电强度
Dielectric strength kV/mm

介电强度
Dielectric strength kV/mm ASTM D149

体积电阻率
Volume resistivity ohms·cm

体积电阻率
Volume resistivity ohms·cm ASTM D257

耗散因数(23℃，60 Hz)
Dissipation factor ASTM D150

表面电阻率
Surface resistivity ohms

阻燃性能
FLAMMABILITY MadeSolid PET+ Ensinger TECAPET® 单位
UNIT 测试方法
TEST METHOD

阻燃等级
Flame retardant level UL 94

阻燃等级(> 1.60 mm)
Flame retardant level

阻燃等级(> 3.20 mm)
Flame retardant level

机械性能
MECHANICAL MadeSolid PET+ Ensinger TECAPET® 单位
UNIT 测试方法
TEST METHOD

弯曲强度
bending strength MPa

弯曲强度(23℃)
bending strength MPa ASTM D790

弯曲模量
Bending modulus MPa

弯曲模量(23℃)
Bending modulus MPa ASTM D790

拉伸应变(断裂)
Tensile strain %

拉伸应变(断裂，23℃)
Tensile strain % ASTM D638

拉伸强度(屈服)
tensile strength MPa

拉伸强度(屈服，23℃)
tensile strength MPa ASTM D638

拉伸强度(断裂)
tensile strength MPa

拉伸模量
Tensile modulus MPa ASTM D638

摩擦系数(与自身 - 动态)
friction coefficient ASTM D1894

摩擦系数(与自身 - 静态)
friction coefficient ASTM D1894

洛氏硬度(M 级)
Rockwell hardness ASTM D785

洛氏硬度(R 级)
Rockwell hardness

磨损因数(0.28 MPa，0.25 m/sec)
Wear factor 10^-8 mm³/N·m ASTM D3702

备注

1 一般属性：这些不能被视为规格。

2 40 psi, 50 fpm

3 Against Steel

4 50% RH


相关资讯

牌号简介
产品描述
技术参数
物理性能
冲击性能
热性能
电气性能
阻燃性能
机械性能
加工方式
备注
返回顶部

PET，MadeSolid PET+对比PET，Ensinger TECAPET®对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别