LDPE，Eltex® MED PH22D630对比LDPE，Bormed™ LE6607-PH物性表,价格行情_搜料

牌号信息	Eltex® MED PH22D630 物性表 LDPE & 瑞士英力士苯领指导价格：暂无塑料库存：缺货	Bormed™ LE6607-PH 物性表 LDPE & 奥地利北欧化工指导价格：暂无塑料库存：缺货
牌号简介	用于药物吹塑的低密度聚乙烯优点和特点Eltex® MED PH22D630是一种采用高压工艺生产的LD聚乙烯，用于医药产品软包装和软包装的吹塑。Eltex® MED PH22D630是根据良好的生产规范生产的，不含添加剂。Eltex® MED PH22D630以颗粒形式提供。应用Eltex® MED PH22D630可用于生产安瓿和瓶子的“吹填和密封”机器。该产品也可用于用其他转化技术（如注塑和吹膜）制造的医药产品。本产品不用于热灭菌。 Low Density Polyethylene for Pharmaceutical Blow Moulding Benefits & Features Eltex® MED PH22D630 is a LD-polyethylene produced in a high-pressure process intended for blow moulding of soft and flexible packages for pharmaceutical products. Eltex® MED PH22D630 is produced according to good manufacturing practice and is additive-free. Eltex® MED PH22D630 is available in granular form. Applications Eltex® MED PH22D630 can be used in "blow-fill and seal" machines for the production ampoules and bottles. The product can also be used for pharmaceutical products manufactured with other conversion techniques such as injection moulding and film blowing. The product is not intended for heat sterilisation	Bormed™ LE6607-PH是一种通过高压工艺生产的低密度聚乙烯。用于医药产品软包装和软包装的吹塑。该产品还可用于注塑和吹膜。由Bormed™ LE6607-PH制成的产品可以使用环氧乙烷、γ辐射、电子束辐射或蒸汽进行灭菌。灭菌蒸汽温度最高110°C。应用：医药产品“吹填和密封”安瓿和瓶子的包装 Bormed LE6607-PH is a resin intended for evaluation for use in Healthcare applications. Bormed LE6607-PH is an additive free low density polyethylene typically used in blow moulding articles. Material is characterised with a balanced in flexibility to facilitate to collapsibility of containers. Bottles and ampoules made from Bormed LE6607PH can be steam sterilised at maximum 110 °C. Products made from Bormed LE6607-PH can be sterilised by using ethylene oxide or radiation up to 35 kGy. Applications Bormed LE6607-PH has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed LE6607-PH . Bottles for irrigation solutions Ampoules for injectable solutions Bottles for IV-solutions This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure. Special features No additives

产品描述
厂家：	瑞士英力士苯领 INEOS	奥地利北欧化工 Borealis AG
类别：	LDPE LDPE	LDPE LDPE
填料：
用途：	瓶子,药物,药品包装	瓶子,药品包装
性能特点：	韧性好,低密度,柔软性好 Good flexibility,Low density,Soft	韧性好,蒸汽消毒,可回收,抗伽马射线,电子束消毒,低密度,辐射消毒,柔软性好 Good flexibility,Steam sterilized,Renewable resources,Gamma radiation,E-beam disinfection,Low density,Radiation disinfection,Soft
加工条件：	吹塑薄膜	挤出 Extrusion