LLDPE，SABIC® LLDPE 218BJ对比LLDPE，SABIC® LLDPE 218BE (Film)物性表,价格行情_搜料

牌号信息	SABIC® LLDPE 218BJ 物性表 LLDPE & 沙特沙伯基础指导价格：暂无塑料库存：缺货	SABIC® LLDPE 218BE (Film) 物性表 LLDPE & 沙特沙伯基础指导价格：暂无塑料库存：缺货
牌号简介	SABIC® LLDPE 218BJ是一种具有添加剂包装的丁烯线性低密度聚乙烯树脂，通常设计用于更广泛的食品应用（无TNPP）。良好的热稳定性允许在关键的挤压加工条件下使用树脂。与低mfr-lldpe树脂相比，从SABIC® LLDPE 218BJ生产的薄膜具有更好的拉伸性能。SABIC® LLDPE 218BJ是一种线性低密度聚乙烯天然树脂，通常用于电线和电缆应用。SABIC® LLDPE 218BJ含有高水平的抗氧化剂，不含任何抗阻剂和/或抗滑剂。具有良好的抗环境应力开裂性能。应添加足够的铜抑制剂，以满足特定的老化要求。对于护套应用，需要添加炭黑或紫外线稳定剂。应用吹塑膜：SABIC® LLDPE 218BJ通常用于食品应用（层压膜、阻挡膜），但也可用于工业包装，并作为与其他SABIC PE树脂在吹塑和铸膜应用中的混合伙伴。SABIC® LLDPE 218BJ通常用于食品应用（层压膜、阻挡膜）和托盘手包。色母粒复合：适用于薄膜和吹塑应用中的添加剂色母粒（如滑模剂、防雾剂、防静电剂、热稳定剂）。电线电缆挤出：电信和电力电缆（低压、中压、高压）护套。无卤阻燃（HFFR）化合物。一步或两步硅烷交联电缆绝缘。本产品不适用于任何医药/医疗应用，也不得用于任何医药/医疗应用。 SABIC® LLDPE 218BJ is a butene linear low density polyethylene resin with an additive package typically designed for a broader range of food applications (TNPP free). The good thermal stability allows to use the resin in critical extrusion processing conditions. Films produced from SABIC® LLDPE 218BJ have better draw-down ability compared to lower MFR LLDPE resins. SABIC® LLDPE 218BJ is a Linear Low Density Polyethylene natural resin typically used for wire and cable applications. SABIC® LLDPE 218BJ contains a high level of antioxidants and does not contain any antiblock and/or slip agents. It also exhibits good Environmental Stress Crack Resistance (ESCR). Sufficient Cu-inhibitor should be added to meet specific ageing requirements. For jacketing applications, addition of Carbon Black or UV stabilizer is required. Applications Blown Film: SABIC® LLDPE 218BJ is typically used for food applications (lamination film, barrier film) but can also be used in industrial packaging and as blending partner with other SABIC® PE resins in both blown and cast film applications. SABIC® LLDPE 218BJ is typically used for food applications (lamination film, barrier film) and pallet hand wrap. Masterbatch Compounding: It is suitable for additive masterbatches (eg. slip agents, anti fog agents, anti static agents, thermal stabilizers) in film and blow moulding applications. Wire & Cable Extrusion: Telecommunication and Power cable (LV, MV, HV) jacketing. Halogen-free flame retardant (HFFR) compounds. One-step or two-steps silane crosslinkable for cable insulation. This product is not intended for and must not be used in any pharmaceutical/medical applications.	SABIC LLDPE 218BE是一种带有添加剂包装的丁烯线性低密度聚乙烯树脂，通常设计用于更广泛的食品应用（不含TNPP）。良好的热稳定性允许在关键的挤压加工条件下使用树脂。SABIC LLDPE 218BE制备的薄膜与较低的MFR LLDPE树脂相比，具有更好的拉伸性能。应用吹塑膜：SABIC LLDPE 218BE通常用于食品应用（层压膜、阻挡膜），但也可用于工业包装，并作为与其他SABIC PE树脂在吹塑和铸膜应用中的混合伙伴。铸膜：SABIC LLDPE 218BE通常用于食品应用（层压膜、阻挡膜）和托盘手包。色母粒复合：适用于薄膜和吹塑应用中的添加剂色母粒（如滑模剂、防雾剂、防静电剂、热稳定剂）。本文所述产品尤其未经测试，因此未经验证可用于医药/医疗应用。 SABIC® LLDPE 218BE is a butene linear low density polyethylene resin with an additive package typically designed for a broader range of food applications (TNPP free). The good thermal stability allows to use the resin in critical extrusion processing conditions. Films produced from SABIC® LLDPE 218BE have better draw-down ability compared to lower MFR LLDPE resins. SABIC® LLDPE 218BE is a Linear Low Density Polyethylene natural resin typically used for wire and cable applications. SABIC® LLDPE 218BE contains a high level of antioxidants and does not contain any antiblock and/or slip agents. It also exhibits good Environmental Stress Crack Resistance (ESCR). Sufficient Cu-inhibitor should be added to meet specific ageing requirements. For jacketing applications, addition of Carbon Black or UV stabilizer is required. Application Blown Film: SABIC® LLDPE 218BE is typically used for food applications (lamination film, barrier film) but can also be used in industrial packaging and as blending partner with other SABIC® PE resins in both blown and cast film applications. Cast Film: SABIC® LLDPE 218BE is typically used for food applications (lamination film, barrier film) and pallet hand wrap. Masterbatch Compounding: It is suitable for additive masterbatches (eg. slip agents, anti fog agents, anti static agents, thermal stabilizers) in film and blow moulding applications. Wire & Cable Extrusion: Telecommunication and Power cable (LV, MV, HV) jacketing. Halogen-free flame retardant (HFFR) compounds. One-step or two-steps silane crosslinkable for cable insulation. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

产品描述
厂家：	沙特沙伯基础 SABIC	沙特沙伯基础 SABIC
类别：	LLDPE Linear low density polyethylene	LLDPE Linear low density polyethylene
填料：
用途：	流延薄膜,包装,电缆护套,母料,电线电缆应用,混合,吹膜,工业应用,复合,外套,绝缘材料,非特定食品应用	复合,包装,工业应用,薄膜,非特定食品应用,混合,母料,流延薄膜,吹膜
性能特点：	耐候抗UV,食品接触,抗氧化,低密度,丁烯共聚单体,热稳定性好,抗应力开裂 Weather resistance is good,Food contact compliance,Inoxidizability,Low density,Butylene copolymer,Heat Stabilized,High ESCR	食品接触,抗氧化,低密度,丁烯共聚单体,热稳定性好 Food contact compliance,Inoxidizability,Low density,Butylene copolymer,Heat Stabilized
加工条件：	电线	吹塑薄膜

技术参数

物理性能
PHYSICAL SABIC® LLDPE 218BJ SABIC® LLDPE 218BE (Film) 单位
UNIT 测试方法
TEST METHOD

密度
Density g/cm³ ISO 1183/A

熔体质量流动速率(190℃，2.16kg)
Melt Flow Rate g/10min ISO 1133

薄膜
SABIC® LLDPE 218BJ SABIC® LLDPE 218BE (Film) 单位
UNIT 测试方法
TEST METHOD

Elastic Recovery(铸造薄膜，20.0 µm)
Elastic Recovery (cast film, 20.0 µ m) % ASTM D5459

Protrusion Puncture Resistance - 铸造薄膜(20.0 µm)
Corrosion Function Resistance - Cast thin film (20.0 µ m) J ASTM D5748

Retention Force(60 sec，20.0 µm)
Retention Force（60 sec，20.0 µm） g

Stress Retention(铸造薄膜，20.0 µm)
Stress Retention (cast film, 20.0 µ m) % ASTM D5459

Ultimate Pre(stretch Level 铸造薄膜，20.0 µm)
Ultimate Pre-stretch Level - Cast Film (20.0 µm) %

薄膜厚度(测试)
film thickness µm

热性能
THERMAL SABIC® LLDPE 218BJ SABIC® LLDPE 218BE (Film) 单位
UNIT 测试方法
TEST METHOD

熔融温度(DSC)
Melting temperature ℃ 内部方法

维卡软化温度
Vicat Softening Temp ℃ ISO 306/A

电气性能
ELECTRICAL SABIC® LLDPE 218BJ SABIC® LLDPE 218BE (Film) 单位
UNIT 测试方法
TEST METHOD

介电常数(60 Hz)
Dielectric constant ASTM D150

介电强度
Dielectric strength kV/mm ASTM D149

体积电阻率
Volume resistivity ohms·cm ASTM D257

耗散因数(60 Hz)
Dissipation factor ASTM D150

光学性能
OPTICAL SABIC® LLDPE 218BJ SABIC® LLDPE 218BE (Film) 单位
UNIT 测试方法
TEST METHOD

光泽度(45°，20 µm，铸造薄膜)
gloss ASTM D2457

雾度(20.0 µm，铸造薄膜)
Haze % ASTM D1003A

补充信息
SABIC® LLDPE 218BJ SABIC® LLDPE 218BE (Film) 单位
UNIT 测试方法
TEST METHOD

Peel Cling(0% pre-stretch：20.0 µm)
Peel Cling g/2.5 cm ASTM D5458

Peel Cling(200% pre-stretch：20.0 µm)
Peel Cling g/2.5 cm ASTM D5458

撕裂强度(TD，20 µm)
tear strength kN/m ISO 6383-2

落锤冲击(20.0 µm，铸造薄膜)
Drop hammer impact J/cm ISO 7765-2

机械性能
MECHANICAL SABIC® LLDPE 218BJ SABIC® LLDPE 218BE (Film) 单位
UNIT 测试方法
TEST METHOD

弯曲模量(1% 正割)
Bending modulus MPa ASTM D790

拉伸应变(屈服)
Tensile strain % ASTM D638

拉伸应变(断裂)
Tensile strain % ASTM D638

拉伸强度(屈服)
tensile strength MPa ASTM D638

拉伸强度(断裂)
tensile strength MPa ASTM D638

邵氏硬度(邵氏 D)
Shore hardness ASTM D2240

加工方式

挤出 SABIC® LLDPE 218BJ SABIC® LLDPE 218BE (Film) 单位测试方法

熔体温度 °C

备注

2 Cast Film

3 500 V/sec

1 一般属性：这些不能被视为规格。

2 Cast Film


相关资讯

牌号简介
产品描述
技术参数
物理性能
薄膜
热性能
电气性能
光学性能
补充信息
机械性能
加工方式
挤出
备注
返回顶部

LLDPE，SABIC® LLDPE 218BJ对比LLDPE，SABIC® LLDPE 218BE (Film)对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别