LLDPE，InnoPlus LL8420A对比LLDPE，SABIC® LLDPE MG200024物性表,价格行情_搜料

牌号信息	InnoPlus LL8420A 物性表 LLDPE & 泰国PTT 指导价格：暂无塑料库存：缺货	SABIC® LLDPE MG200024 物性表 LLDPE & 沙特沙伯基础指导价格：暂无塑料库存：缺货
牌号简介	InnoPlus LL8420A树脂是一种线性低密度聚乙烯，专为注塑应用而设计。该牌号分子量分布非常窄，具有优异的冲击强度、刚度、抗环境应力开裂性能和加工性能。InnoPlus LL8420A推荐用于生产通用注塑应用；盖子、家庭用品、垃圾箱、母粒载体。 InnoPlus LL8420A resin is a linear low density polyethylene which is designed for injection molding application. This grade has very narrow molecular weight distribution, offers an excellent impact strength, rigidity, environmental stress cracking resistance and processability. Typical Applications : InnoPlus LL8420A is recommended for producing general purpose injection molding applications; lids, housewares, trash bins, masterbatch carrier.	SABIC LLDPE MG200024 SABIC® LLDPE MG200024是一种具有窄分子量分布的高流动线性低密度聚乙烯共聚物级。SABIC® LLDPE MG200024为粉末状。应用SABIC® LLDPE MG200024通常用于吹塑、注塑和薄膜挤出应用中碳黑、二氧化钛或颜料含量很高的母粒。由于树脂是以自由流动的粉末形式提供的，因此它可以用于母粒生产，其中使用的是聚乙烯粉末。本产品不适用于任何医药/医疗应用，也不得用于任何医药/医疗应用。SABIC LLDPE MG200024 SABIC® LLDPE MG200024是一种具有窄分子量分布的高流动线性低密度聚乙烯共聚物级。SABIC LLDPE MG 200024呈粉末状。SABIC® LLDPE MG200024非常适合于母料应用，如吹塑、注塑和薄膜挤出。特别适用于炭黑、二氧化钛或颜料含量很高的母料。由于树脂是以粉末形式提供的，因此非常适合于使用聚乙烯粉末的母粒生产。本文所述产品尤其未经测试，因此未经验证可用于医药/医疗应用。 SABIC® LLDPE MG200024 SABIC® LLDPE MG200024 is a high flow linear low density polyethylene copolymer grade with a narrow molecular weight distribution. SABIC® LLDPE MG200024 is in powder form. Application SABIC® LLDPE MG200024 is typically used for masterbatches with very high carbon black, titanium dioxide or pigment content in blow moulding, injection moulding and film extrusion applications. Since the resin is supplied in free flowing powder form, it can be used for masterbatch production where PE powders are used. This product is not intended for and must not be used in any pharmaceutical/medical applications. SABIC® LLDPE MG200024 SABIC® LLDPE MG200024 is a high flow linear low density polyethylene copolymer grade with a narrow molecular weight distribution. SABIC® LLDPE MG 200024 is in powder form. SABIC® LLDPE MG200024 is well suited for masterbatch applications like blow moulding, injection moulding and film extrusion. Especially for masterbatches with very high carbon black, titanium dioxide or pigment content. Since the resin is supplied in powder form, it is extremely suited for masterbatch production where PE powders are used. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.

产品描述
厂家：	泰国PTT	沙特沙伯基础 SABIC
类别：	LLDPE Linear low density polyethylene	LLDPE Linear low density polyethylene
填料：
用途：	盖子,废物容器,通用,家用货品,母料	复合,母料
性能特点：	机械强度好,易加工,冲击性能好,窄分子量分布,抗应力开裂 Good Rigidity,Excellent Processability,High impact resistance,Weight distribution,High ESCR	流动性高,窄分子量分布,低密度,共聚物 High liquidity,Weight distribution,Low density,Copolymer
加工条件：	注射成型 Injection Molding	吹塑成型