3D打印材料，Dyna-Purge® P对比3D打印材料，Accura® Bluestone™物性表,价格行情_搜料

牌号信息	Dyna-Purge® P 物性表 3D打印材料 & 美国Dyna-Purge 指导价格：暂无塑料库存：缺货	Accura® Bluestone™ 物性表 3D打印材料 & 美国3D Systems 指导价格：暂无塑料库存：缺货
牌号简介	专为热流道系统设计的Dyna-Purge P是一种非研磨、非化学工程热塑性清洗化合物，其配方使其能够自然流过注射成型机的筒体和热流道系统。先进的配方，双作用洗涤，扩大到狭窄的渠道和负流区，以松动和去除降解材料。特性和好处：颜色变化、树脂变化、预防性机器维护和手动清洗前性能优良。开发用于通过热流道系统清洗，最小间隙为0.025英寸（0.65毫米），通过320°F至575°F（160°C至302°C）宽的温度范围有效，使用方便，不需要工艺调整。在常用树脂加工温度和RPM速度下使用，无磨料，不熔化，但软化热塑性塑料，彻底松弛碳化和降解的树脂，允许其冲出系统，安全，无危险，无化学品。成分符合FDA要求，热稳定。建议停机和启动时低。“每次清洗的成本”-只需要少量才能有效，不需要混合-只要使用“无限期的保质期”即可。 Designed for Hot Runner Systems DYNA-PURGE P is a non-abrasive, non-chemical engineered thermoplastic purging compound, formulated to have a natural flow through the barrel and hot runner system of the injection molding machine. An advanced formulation, with dual action scrubbing, expands into tight channels and negative flow areas to loosen and remove degraded material. FEATURES & BENEFITS: Excellent for color changes, resin changes, preventative machine maintenance, and before manual cleaning Developed for purging through hot runner systems with a minimum clearance of 0.025 inch (0.65 mm) Effective through a wide temperature range 320°F to 575°F(160°C to 302°C) Easy to use - no process adjustment necessary - use at the resident resin processing temperature and RPM speed Non-abrasive, non-melting but softening thermoplastic, which thoroughly loosens carbonized and degraded resin, allowing it to be flushed out of the system Safe, non-hazardous, with no chemicals - ingredients are FDA compliant Heat stable - recommended during shutdown and start-up Low "cost-per-purge" - only small quantity needed to be effective No mixing required - simply use "as is" Unlimited shelf life	具有最高的刚度、耐热性和耐磨性、优异的耐化学性，适用于风洞模型、夹具和固定装置。 Features Highest stiffness available Heat and abrasion resistant Excellent chemical resistance Great for windtunnel models, jigs and fixtures

产品描述
厂家：	美国Dyna-Purge	美国3D Systems
类别：	3D打印材料 3D打印材料	3D打印材料 3D打印材料
填料：
用途：	清洗复合物
性能特点：		机械强度好,耐高温,耐磨,耐化学性 Good Rigidity,High Heat Resistance,Good wear resistance,Solvent resistance
加工条件：	注射成型 Injection Molding	立体光刻