PLA，Ingeo™ 4044D对比PLA，Ingeo™ 4032D物性表,价格行情_搜料

牌号信息	Ingeo™ 4044D 物性表 PLA & 美国NatureWorks 指导价格：暂无塑料库存：缺货	Ingeo™ 4032D 物性表 PLA & 美国NatureWorks 指导价格：暂无塑料库存：缺货
牌号简介	Ingeo™ 4044D是NatureWorks LLC的生产等级，是为满足反应挤出工艺的需要而制定的。当用环氧功能添加剂（如巴斯夫-琼克力ADR 4368C）挤压时，这种等级的材料会发生反应，链条会不断延伸/分支，从而产生更高的剪切粘度和提高的熔体强度。以重量计，琼克力材料的典型添加率小于0.5%。在开始使用该等级的任何反应性挤出项目之前，建议咨询NatureWorks技术代表。 Ingeo 4044D is a NatureWorks LLC production grade that is formulated to meet the needs of reactive extrusion processes. When extruded with epoxy functional additives such as BASF Joncryl® ADR 4368C, this grade reacts and chain extends / branches consistently resulting in higher shear viscosity and improved melt strength. Typical addition rates of Joncryl® materials are less than 0.5% by weight. Consultation with your NatureWorks technical representative is recommended before embarking on any reactive extrusion program with this grade.	Ingeo™ 4032D可转换成使用温度高达300°F（150°C）的双轴取向膜。该薄膜具有优良的光学性能、良好的可加工性和优良的扭曲度和折叠度。这些特性使4032D薄膜成为层压和其他包装应用的理想产品。其他特性包括风味、油脂和耐油性。 Ingeo biopolymer 4032D, a NatureWorks LLC product, is a thermoplastic resin derived from annually renewable resources and is specifically designed general extrusion processes when a higher melting point product is needed. Ingeo biopolymer 4032D is a general purpose extrusion grade that is used naturally or as part of a formulated blend. When formulated with nucleating agents, product may be crystallized to achieve parts with higher HDT than its amorphous counterpart. This is a high molecular weight biopolymer grade that processes easily on conventional extrusion equipment. Common nucleating agents are talc, ethylene bis-steramide and propriety offerings from third party suppliers Potential applications for Ingeo biopolymer 4032D include: Signage Gift Cards Profiles Ingeo 4032D can be converted into a biaxially oriented film with use temperatures up to 300°F (150°C). This film has excellent optics, good machinability and excellent twist and deadfold. These properties make 4032D film an ideal product for laminations and other packaging applications. Additional properties include barrier to flavor and grease and oil resistance.

产品描述
厂家：	美国NatureWorks	美国NatureWorks
类别：	PLA PLA	PLA PLA
填料：
用途：		包装,双向拉伸薄膜,层压板
性能特点：	可回收,生物可降解,食品接触,可堆肥 Renewable resources,Biodegradable,Food contact compliance,Compostable	弯曲性能好,可回收,光学性能,可分散,生物可降解,耐油 High elastic,Renewable resources,Optical performance,Machinable,Biodegradable,Grease resistance
加工条件：	薄膜挤出 Film extrusion	挤出 Extrusion

技术参数

物理性能
PHYSICAL Ingeo™ 4044D Ingeo™ 4032D 单位
UNIT 测试方法
TEST METHOD

密度
Density g/cm³ ASTM D1505

熔体密度(230℃)
Melt density g/cm³

熔体质量流动速率(210℃，2.16kg)
Melt Flow Rate g/10min ASTM D1238

薄膜
Ingeo™ 4044D Ingeo™ 4032D 单位
UNIT 测试方法
TEST METHOD

Spencer Impact
Spencer Impact J

二氧化碳传输速率
Carbon dioxide transfer rate cm³/m²/24 hr Internal Method

二氧化碳传输速率(25 µm)
Carbon dioxide transfer rate cm³/m²/24 hr Internal Method

割线模量(MD，25 µm)
Secant modulus MPa ASTM D882

割线模量(TD，25 µm)
Secant modulus MPa ASTM D882

埃尔曼多夫抗撕强度(MD，25 µm)
Elmandorf tear strength g ASTM D1922

拉伸应变(MD，断裂，25 µm)
Tensile strain % ASTM D882

拉伸应变(TD，断裂，25 µm)
Tensile strain % ASTM D882

拉伸强度(MD，屈服，25 µm)
tensile strength MPa ASTM D882

拉伸强度(TD，屈服，25 µm)
tensile strength MPa ASTM D882

撕裂强度(TD，25 µm)
tear strength g ASTM D1922

氧气传输速率(25 µm)
Oxygen transfer rate cm³/m²/24 hr ASTM D1434

水气透过率
Water vapor transmittance g·mm/m²/atm/24 hr ASTM F1249

水气透过率(25 µm)
Water vapor transmittance g·mm/m²/atm/24 hr ASTM F1249

薄膜厚度(测试)
film thickness µm

透氧率
Oxygen permeability cm³/m²/24 hr ASTM D1434

热性能
THERMAL Ingeo™ 4044D Ingeo™ 4032D 单位
UNIT 测试方法
TEST METHOD

熔融温度
Melting temperature ℃ ASTM D3418

结晶峰温度(DSC)
Crystallization peak temperature ℃ ASTM D3418

光学性能
OPTICAL Ingeo™ 4044D Ingeo™ 4032D 单位
UNIT 测试方法
TEST METHOD

光泽度(20°)
gloss ASTM D1003

光泽度(20°，25.4 µm)
gloss ASTM D2457

雾度
Haze % ASTM D1003

雾度(25.4 µm)
Haze % ASTM D1003

冲击性能
IMPACT Ingeo™ 4044D Ingeo™ 4032D 单位
UNIT 测试方法
TEST METHOD

悬臂梁缺口冲击强度
Impact strength of cantilever beam notch J/m ASTM D256

加工方式

挤出 Ingeo™ 4044D Ingeo™ 4032D 单位测试方法

口模温度 °C

干燥时间 hr

干燥温度 °C

建议的最大水分含量 %

接头温度 °C

料斗温度 °C

料筒1区温度 °C

料筒2区温度 °C

料筒3区温度 °C

熔体温度 °C

备注

1 一般属性：这些不能被视为规格。


相关资讯

牌号简介
产品描述
技术参数
物理性能
薄膜
热性能
光学性能
冲击性能
加工方式
挤出
备注
返回顶部

PLA，Ingeo™ 4044D对比PLA，Ingeo™ 4032D对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别