LDPE，DINALEN® 65对比LDPE，SABIC® LDPE Powder 1965P9物性表,价格行情_搜料

牌号信息	DINALEN® 65 物性表 LDPE & 克罗地亚DIOKI 指导价格：暂无塑料库存：缺货	SABIC® LDPE Powder 1965P9 物性表 LDPE & 沙特沙伯基础指导价格：暂无塑料库存：缺货
牌号简介	DINALEN® 65是低密度聚乙烯，含有防滑和防堵塞添加剂。用于薄膜吹塑。其他处理技术的使用范围较小。DINALEN® 65具有优异的加工性能、均匀的光学和其他性能，这取决于其应用。它在140°C到165°C的温度范围内挤压。DINALEN® 65根据所选的加工参数（如加工温度和容量）、吹风比和霜线高度提供所需性能的薄膜。建议膜厚：0.020 mm至0.040 mm。 DINALEN® 65 is low density polyethylene containing slip and anti-blocking additives. It is intended for thin blow film extrusion. Other processing techniques can be used in less extent. DINALEN® 65 exhibits excellent processability, uniform optical and other properties, depending on its application. It is extruded at temperatures ranging from 140°C to 165°C. DINALEN® 65 gives films of desired properties depending on selected processing parameters such as processing temperature and capacity; blowing ratio, and the height of the frost line. Recommended film thickness : 0.020 mm to 0.040 mm.	SABIC® LDPE Powder 1965P9是一种无添加剂的标准CTR管状级母粒，具有典型的低粘度。该等级具有典型的高填料接受度。应用SABIC® LDPE Powder 1965P9是正常尺寸的粉末等级。由于该等级是以粉末形式提供的，因此通常适用于预混合。颜料和添加剂的流动和分散趋向于堵塞，通常通过添加该等级来改善。本产品不适用于任何医药/医疗应用，也不得用于任何医药/医疗应用。 SABIC® LDPE Powder 1965P9 is an additive free standard CTR® tubular grade for masterbatch with a typically low viscosity. This grade has a typically high filler acceptance. Application SABIC® LDPE Powder 1965P9 is a normal sized powder grade. Since the grade is supplied in powder form it is typically suited for pre mixing. The flow and dispersion of pigments and additives that tend towards blocking are typically improved by adding this grade. This product is not intended for and must not be used in any pharmaceutical/medical applications.

产品描述
厂家：	克罗地亚DIOKI	沙特沙伯基础 SABIC
类别：	LDPE LDPE	LDPE LDPE
填料：
用途：	薄膜,厚壁配件（部件）,混合,食品包装,袋子	母料,复合
性能特点：	易加工,透光性好,表面光泽度好,高光滑性,光学性能,抗结块性,食品接触 Excellent Processability,Good Clarity,Good surface appearance,Smoothness,Optical performance,High anti-blocking,Food contact compliance	低粘度,低密度 Low Viscosity,Low density
加工条件：	共挤出成型	复合