环氧树脂，CYCOM® 2020对比环氧树脂，LTM® 318-1B物性表,价格行情_搜料

牌号信息	CYCOM® 2020 物性表环氧树脂 & 美国氰特指导价格：暂无塑料库存：缺货	LTM® 318-1B 物性表环氧树脂 & 美国氰特指导价格：暂无塑料库存：缺货
牌号简介	CYCOM® 2020是一种多功能固化增韧环氧树脂，可在180°F至350°F（80°C至180°C）之间固化，具体取决于工作温度要求。这种预浸料树脂从碳纤维中提取最大可能的性能。CYCOM® 2020提供的优良的综合性能平衡使它成为许多F1赛车队在结构应用中的首选产品。CYCOM® 2020可以是高压釜或真空袋固化。也可以使用独立的明信片。在275°F（135°C）下固化一小时，Tg超过310°F（155°C）。相同的固化循环提供了优异的机械性能，并在温度下保持这些性能；70%的剪切强度在250°F（120°C）下保持。CYCOM® 2020可用于编织和单向碳纤维、玻璃纤维和芳纶纤维，在环境条件下的粘结寿命超过四周，始终保持良好的悬垂性和粘结性。 CYCOM® 2020 is a versatile curing, toughened epoxy resin that can be cured from 180°F to 350°F (80°C to 180°C), depending on service temperature requirements. This prepreg resin extracts the maximum possible performance from carbon fibers. The excellent overall balance of properties delivered by CYCOM 2020 has made it the product of choice for many Formula 1 race teams in structural applications. CYCOM 2020 can be either autoclave or vacuum bag cured. Free-standing postcures can also be employed. A one hour cure at 275°F (135°C) gives a Tg of more than 310°F (155°C). The same cure cycle provides excellent mechanical properties with retention of those properties at temperature; 70% of shear strength is retained at 250°F (120°C). CYCOM 2020 is available on both woven and unidirectional carbon, glass and aramid fiber and has a tack-life under ambient conditions in excess of four weeks, maintaining good drape and tack characteristics throughout.	LTM® 318-1B是一个矩阵系统，开发用于生产180°C（356°F）的模具，使用烤箱真空袋加工。LTM318-1B具有65°C（149°F）的初始固化能力，使用寿命长，固化后耐180°C（356°F）的热循环。LTM318-1B与LTF318B ZPREG选择性浸渍技术结合使用，为制造成本效益高、质量高的复合模具工具提供了新的可能性。 LTM® 318-1B is a matrix system developed for the production of 180°C (356°F) capable tooling using oven vacuum bag processing. LTM318-1B offers a 65°C (149°F) initial cure capability, long out life and, after post-cure, resistance to thermal cycling to 180°C (356°F). LTM318-1B used in conjunction with LTF318B ZPREG® selective impregnation technology surface films offers new possibilities for the manufacture of cost- effective, high quality composite mould tools.

产品描述
厂家：	美国氰特 Cytec Industries	美国氰特 Cytec Industries
类别：	环氧树脂环氧树脂	环氧树脂环氧树脂
填料：	玻璃纤维/碳纤维	玻璃纤维/碳纤维
用途：	汽车领域的应用,构件	模具
性能特点：	表面光泽度好,冲击性能好 Good surface appearance,High impact resistance	热膨胀系数低,耐老化,表面光泽度好,收缩性低,加热硫化 Low CLTE,Good heat aging resistance,Good surface appearance,Low contractility,Baking
加工条件：		真空成型