TPS+PP，Terraloy™ MB-13000A对比TPS+PP，Cardia Biohybrid™ H-FM物性表,价格行情_搜料

牌号信息	Terraloy™ MB-13000A 物性表 TPS+PP & 美国特诺尔爱佩斯指导价格：暂无塑料库存：缺货	Cardia Biohybrid™ H-FM 物性表 TPS+PP & 澳大利亚Cardia Bioplastics 指导价格：暂无塑料库存：缺货
牌号简介	Terraloy MB-13000A是一种热塑性淀粉/聚丙烯（PP）母料，含有多达50%的TPS 可再生物质。母料中抗冲聚丙烯（PP）的熔融指数 (L)为20。这种复合材料主要用于注射成型应用。与聚丙烯（PP）的掺和比建议为1.1。 Terraloy MB-13000A is a Thermoplastics Starch/PP masterbatch that contains up to 50% of TPS renewable content. Impact PP melt index (L) in the masterbatch is 20. This compound is for Injection molded application. Recommended letdown ratio with PP is 1:1.	Cardia Biohybrid™ H-FM是基于热塑性淀粉（TPS）和聚烯烃的混合物。这一等级的树脂是相容的，以提供高水平的机械强度，良好的延伸性能和韧性。这种树脂是以玉米淀粉为原料制成的，玉米淀粉是一种可再生材料。一种生物混合树脂，用于不需要生物降解性的发泡应用。用于需要使用可再生资源的应用。可用于化学和物理发泡剂Cardia Biohybrid™ H-FM是用50%可再生热塑性淀粉聚合物配制而成。该树脂适用于由泡沫挤出制成的一系列产品。由于聚烯烃含量高，该材料不是完全可生物降解的聚合物，不打算在商业堆肥设施中进行最终处置。应用挤压发泡包装形状挤压发泡包装用板材和缓冲包装和绝缘用挤塑板 Cardia Biohybrid™ H-FM is based on a blend of thermoplastic starch (TPS) and polyolefin's. This grade of resin is compatibilised to offer a high level of mechanical strength, good elongation properties and toughness. The resin is based on corn starch which is a renewable material. A Biohybrid resin for foaming applications where biodegradability is not required. For use in applications where the use of renewable resources are desired. Can be used with chemical and physical blowing agents Cardia Biohybrid™ H-FM is formulated with 50% of renewable thermoplastic starch polymer. This resin is suitable for a range of products manufactured by foam extrusion. Due to its high content of polyolefins the material is not a fully biodegradable polymer and is not intended for ultimate disposal in commercial composting facilities. Applications Extrusion foaming of packaging shapes Extrusion foaming of sheet for packaging and cushioning Extruded boards for packaging and insulation applications

产品描述
厂家：	美国特诺尔爱佩斯 Teknor Apex	澳大利亚Cardia Bioplastics
类别：	TPS+PP TPS+PP	TPS+PP TPS+PP
填料：
用途：	母料	包装,绝缘材料,泡沫,片材
性能特点：	可回收 Renewable resources	机械强度好,韧性好,可回收,发泡性好,食品接触,拉伸性能好 Good Rigidity,Good flexibility,Renewable resources,Foaming performance,Food contact compliance,Good Tensile Strength
加工条件：	注射成型 Injection Molding	发泡挤出成型 Foam extrusion molding