PPSU，Ceramer 20对比PPSU，Paryls® mPPSU M1150物性表,价格行情_搜料

牌号信息	Ceramer 20 物性表 PPSU & 德国Ceramer 指导价格：暂无塑料库存：缺货	Paryls® mPPSU M1150 物性表 PPSU & 江门优巨指导价格：暂无塑料库存：缺货
牌号简介	ceramer和ceramerplus是基于聚苯砜（ppso2）的高性能聚合物和添加剂。陶瓷和陶瓷具有优异的热稳定性、固有的阻燃性和通用的耐化学性。 Ceramer and Ceramerplus are high performance polymers and additives based on polyphenylene sulfone (PPSO2). Ceramer and Ceramerplus have excellent thermal stability, inherent flame resistance and universal chemical resistance.	Paryls MPPSU M1150颗粒装在内衬铝箔袋的纸箱中，如果包装没有损坏，可以无限期地储存。Paryls MPPSU M1150颗粒能快速吸收水分。因此，在加工前，颗粒需要在真空或干燥空气干燥器中在160℃下干燥至少6h。特点Paryls MPPSU是一种改性聚苯砜。它是一种高热量、高性能的树脂配方，具有很好的水解稳定性，对SCID和碱具有优异的抵抗力，在广泛的化学环境下具有良好的抗应力开裂能力。此外，与paryls-psu和paryls-pes相比，paryls-mppsu树脂表现出强劲的韧性和更好的抗缺口能力，尽管略低于纯paryls-ppsu。一般来说，Paryls MPPSU树脂的性能介于PSU和PPSU之间，在较宽的温度范围内具有很好的电气性能和固有的阻燃性，同时也具有较好的性价比优势。天然：MPPSU M1150NT，黑色：MPPSU M1150BK，白色：MPPSU PARYLS® mPPSU M1150 pellets are supplied in cartons lining aluminum foil bag, which can be stored indefinitely, provided the packaging remains undamaged. PARYLS® mPPSU M1150 pellets absorb moisture very rapidly. Therefore, the pellets need to be dried at least 6h at 160 °C in a vacuum or dry air drier prior to processing. Features PARYLS® mPPSU is a modified polyphenylsufone. It is a high-heat, high performance resin formulation exhibiting very good hydrolytic stability, excellent resistance to scids and bases and good resistance to stress cracking under a broad range of chemical environments. In addition, PARYLS® mPPSU resin exhibits robust toughness and improved notch resistance compared to both PARYLS® PSU and PARYLS® PES, although slightly lower than that of neat PARYLS® PPSU. In general, the performance profile of PARYLS® mPPSU resin falls between PSU and PPSU, and also offers very good electrical properties over a broad temperature range as well as inherent flam retardancy, offers better cost-efficiency advantage also. Natural: mPPSU M1150NT, Black: mPPSU M1150BK, White: mPPSU

产品描述
厂家：	德国Ceramer	江门优巨 Youju
类别：	PPSU	PPSU PPSU
填料：
用途：	复合
性能特点：	热稳定性好,硬度高,耐化学性,阻燃,高刚度 Heat Stabilized,Good Hardness,Solvent resistance,Flame Characteristics,high-rigidity	电气性好,耐水解,阻燃,耐酸,耐高温,抗应力开裂 Good Electrical Properties,Hydrolysis stability,Flame Characteristics,Acidproof,High Heat Resistance,High ESCR
加工条件：	复合,模压成型	挤出 Extrusion

技术参数

物理性能
PHYSICAL Ceramer 20 Paryls® mPPSU M1150 单位
UNIT 测试方法
TEST METHOD

吸水率 Water Absorption
Water Absorption %

吸水率(平衡，23℃，50% RH)
Water absorption rate % ISO 62

密度
Density g/cm³ ISO 1183

密度 Density
Density g/cm³

收缩率(MD)
Shrinkage rate % ISO 294-4，ISO 2577

收缩率(TD)
Shrinkage rate % ISO 294-4，ISO 2577

熔体质量流动速率(380℃，2.16kg)
Melt Flow Rate g/10min ISO 1133

结晶度 Crystallinity
Crystallinity %

机械性能
MECHANICAL Ceramer 20 Paryls® mPPSU M1150 单位
UNIT 测试方法
TEST METHOD

弯曲强度
bending strength MPa ISO 178

弯曲强度 Flexural Strength(-30℃)
Flexural Strength MPa ISO 178

弯曲强度 Flexural Strength(100℃)
Flexural Strength MPa ISO 178

弯曲强度 Flexural Strength(200℃)
Flexural Strength MPa ISO 178

弯曲强度 Flexural Strength(23℃)
Flexural Strength MPa ISO 178

弯曲强度 Flexural Strength(300℃)
Flexural Strength MPa ISO 178

弯曲模量
Bending modulus MPa ISO 178

弯曲模量 Flexural Modulus(-30℃)
Flexural Modulus MPa ISO 178

弯曲模量 Flexural Modulus(100℃)
Flexural Modulus MPa ISO 178

弯曲模量 Flexural Modulus(200℃)
Flexural Modulus MPa ISO 178

弯曲模量 Flexural Modulus(23℃)
Flexural Modulus MPa ISO 178

弯曲模量 Flexural Modulus(300℃)
Flexural Modulus MPa ISO 178

拉伸应变 Tensile Strain(断裂，-30℃)
Tensile Strain % ISO 178

拉伸应变 Tensile Strain(断裂，100℃)
Tensile Strain % ISO 178

拉伸应变 Tensile Strain(断裂，200℃)
Tensile Strain % ISO 178

拉伸应变 Tensile Strain(断裂，23℃)
Tensile Strain % ISO 178

拉伸应变 Tensile Strain(断裂，300℃)
Tensile Strain % ISO 178

拉伸应变(屈服)
Tensile strain % ISO 527-2

拉伸强度
tensile strength MPa ISO 527-2

拉伸模量
Tensile modulus MPa ISO 527-2

热性能
THERMAL Ceramer 20 Paryls® mPPSU M1150 单位
UNIT 测试方法
TEST METHOD

热变形温度 HDT(1.8 MPa，未退火)
Hot deformation temperature HDT ℃ ISO 75-2/A

热变形温度 HDT(8.0 MPa，未退火)
Hot deformation temperature HDT ℃ ISO 75-2/C

热变形温度(1.8 MPa，未退火)
Hot deformation temperature ℃ ISO 75-2/A

玻璃化转变温度 Glass Transition Temperature
Glass Transition Temperature ℃

线性热膨胀系数 Coeff.of linear therm expansion(-50 到 100℃)
Coeff. of linear thermal expansion cm/cm/℃

线性热膨胀系数 Coeff.of linear therm expansion(100 到 200℃)
Coeff. of linear thermal expansion cm/cm/℃

线性热膨胀系数 Coeff.of linear therm expansion(200 到 300℃)
Coeff. of linear thermal expansion cm/cm/℃

线性热膨胀系数 Coeff.of linear therm expansion(300 到 360℃)
Coeff. of linear thermal expansion cm/cm/℃

线性热膨胀系数 Coeff.of linear therm expansion(MD)
Coeff. of linear thermal expansion

电气性能
ELECTRICAL Ceramer 20 Paryls® mPPSU M1150 单位
UNIT 测试方法
TEST METHOD

介电常数 Dielectric Constant(1 kHz)
Dielectric Constant ASTM D150

介电常数 Dielectric Constant(1 MHz)
Dielectric Constant ASTM D150

介电常数 Dielectric Constant(1.00 GHz)
Dielectric Constant ASTM D150

介电常数 Dielectric Constant(10 kHz)
Dielectric Constant ASTM D150

介电常数 Dielectric Constant(10 MHz)
Dielectric Constant ASTM D150

介电常数 Dielectric Constant(10.0 GHz)
Dielectric Constant ASTM D150

介电常数 Dielectric Constant(100 kHz)
Dielectric Constant ASTM D150

介电常数 Dielectric Constant(500 MHz)
Dielectric Constant ASTM D150

介电常数(1 MHz)
Dielectric constant IEC 60250

介电常数(100 Hz)
Dielectric constant IEC 60250

介电强度
Dielectric strength kV/mm ASTM D149

介电强度 Dielectric Strength
Dielectric Strength kV/mm ASTM D149

体积电阻率
Volume resistivity ohms·cm IEC 60093

体积电阻率 Volume Resistivity
Volume Resistance ohms·cm ASTM D257

耗散因数 Dissipation Factor(1 GHz)
Dissipation Factor ASTM D150

耗散因数 Dissipation Factor(1 MHz)
Dissipation Factor ASTM D150

耗散因数 Dissipation Factor(10 GHz)
Dissipation Factor ASTM D150

耗散因数 Dissipation Factor(10 kHz)
Dissipation Factor ASTM D150

耗散因数 Dissipation Factor(10 MHz)
Dissipation Factor ASTM D150

耗散因数 Dissipation Factor(100 kHz)
Dissipation Factor ASTM D150

耗散因数 Dissipation Factor(500 MHz)
Dissipation Factor ASTM D150

耗散因数(1 MHz)
Dissipation factor IEC 60250

耗散因数(100 Hz)
Dissipation factor IEC 60250

表面电阻率
Surface resistivity ohms IEC 60093

表面电阻率 Surface Resistivity
Surface Resistivity ohms ASTM D257

冲击性能
IMPACT Ceramer 20 Paryls® mPPSU M1150 单位
UNIT 测试方法
TEST METHOD

悬臂梁缺口冲击强度
Impact strength of cantilever beam notch kJ/m² ISO 180/A

加工方式

注射 Ceramer 20 Paryls® mPPSU M1150 单位测试方法

加工熔体温度 °C

干燥时间 hr

干燥温度 °C

模具温度 °C

挤出 Ceramer 20 Paryls® mPPSU M1150 单位测试方法

口模温度 °C

干燥时间 hr

干燥温度 °C

熔体温度 °C

备注

1 一般属性：这些不能被视为规格。

2 100V


相关资讯

牌号简介
产品描述
技术参数
物理性能
机械性能
热性能
电气性能
冲击性能
加工方式
注射
挤出
备注
返回顶部

PPSU，Ceramer 20对比PPSU，Paryls® mPPSU M1150对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别