PP均聚，SABIC® PP 579S对比PP均聚，SABIC® PP FPH50物性表,价格行情_搜料

牌号信息	SABIC® PP 579S 物性表 PP均聚 & 沙特沙伯基础指导价格：暂无塑料库存：缺货	SABIC® PP FPH50 物性表 PP均聚 & 沙特沙伯基础指导价格：暂无塑料库存：缺货
牌号简介	这一等级是专门开发用于薄壁，抗静电容器。该材料具有出色的流动性能和高刚度，可实现高生产率。其特点是翘曲性低，批次间一致性高，接触透明性好，光泽度高。采用复合加工和抗静电添加剂包装而成。本文所述产品尤其未经测试，因此未经验证可用于医药/医疗应用。 This grade has been specially developed for use in thin-walled, antistatic containers. The material has outstanding flow properties and a high stiffness, enabling high production rates. Special characteristics are low tendency for warpage, high lot to lot consistency, good contact transparency and high gloss. It is formulated with a combined processing and antistatic additive package. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.	SABIC® PP FPH50是为薄壁包装以及瓶盖和封口市场开发的一个等级。该等级是有核的，其特点是结晶温度高，流动性能好，硬度高。SABIC® PP FPH50允许在简单的模具填充、非常短的循环时间和与颜料结合的强大加工性能的基础上进行非常经济高效的加工。它具有很好的抗静电性能，且易于脱模。SABIC® PP FPH50通常用于食品和非食品段的薄壁包装应用。在瓶盖和瓶盖中，该等级可用于宽口瓶盖等。在媒体包装中，该等级为周期时间优化提供了机会。该等级具有良好的热变形温度，特别适合热填充应用。本产品不适用于任何医药/医疗应用，也不得用于任何医药/医疗应用。 SABIC® PP FPH50 is a grade developed for thin wall packaging as well as the caps & closures market. The grade is nucleated and is characterised by a high crystallisation temperature, excellent flow behaviour in combination with a high stiffness. SABIC® PP FPH50 allows for very cost efficient processing on the basis of easy mould filling, very short cycle times and robust processing behaviour in combination with pigments. It has a very good antistatic performance and shows easy demoulding. SABIC® PP FPH50 is typically used in thin wall packing applications both for food and non-food segments. In caps and closure, the grade could be used for wide mouth caps, amongst others. In media packaging, the grade offers opportunities for cycle time optimisation. The grade has excellent heat deflection temperature making it particularly suitable for hot fill applications. This product is not intended for and must not be used in any pharmaceutical/medical applications.

产品描述
厂家：	沙特沙伯基础 SABIC	沙特沙伯基础 SABIC
类别：	PP均聚 PP homopolymerization	PP均聚 PP homopolymerization
填料：
用途：	薄壁容器	护罩,食品包装,媒介包装,薄壁包装,外壳
性能特点：	机械强度好,低翘曲性,表面光泽度好,易流动,成型周期快,抗静电,均聚物 Good Rigidity,Low warping,Good surface appearance,Good liquidity,Quick molding cycle,Antistatic property,Homopolymer	机械强度好,易流动,成核的,成型周期快,含脱模剂,抗静电,均聚物 Good Rigidity,Good liquidity,Nucleation,Quick molding cycle,Good stripping performance,Antistatic property,Homopolymer
加工条件：	注射成型 Injection Molding	注射成型 Injection Molding

技术参数

物理性能
PHYSICAL SABIC® PP 579S SABIC® PP FPH50 单位
UNIT 测试方法
TEST METHOD

密度
Density g/cm³ ASTM D792, ISO 1183

熔体质量流动速率(230℃，2.16kg)
Melt Flow Rate g/10min ASTM D1238，ISO 1133

冲击性能
IMPACT SABIC® PP 579S SABIC® PP FPH50 单位
UNIT 测试方法
TEST METHOD

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch J/m ASTM D256-A

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch kJ/m² ISO 180-1A

简支梁缺口冲击强度(23℃)
Charpy Notched Impact Strength kJ/m² ISO 179/1eA

热性能
THERMAL SABIC® PP 579S SABIC® PP FPH50 单位
UNIT 测试方法
TEST METHOD

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃ ISO 75-2/Bf

热变形温度(1.8 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

热变形温度(1.8 MPa，未退火)
Hot deformation temperature ℃ ISO 75-2/Af

维卡软化温度(--)
Vicat Softening Temp ℃ ASTM D1525, ISO 306/A 6 6

维卡软化温度(--)
Vicat Softening Temp ℃ ASTM D1525, ISO 306/B 7 7

维卡软化温度(--)
Vicat Softening Temp ℃ ASTM D1525，ISO 306/A120 6 6

维卡软化温度(B120)
Vicat Softening Temp ℃ ASTM D1525, ISO 306/B120 7 7

机械性能
MECHANICAL SABIC® PP 579S SABIC® PP FPH50 单位
UNIT 测试方法
TEST METHOD

拉伸应变(屈服)
Tensile strain % ASTM D638

拉伸应变(屈服)
Tensile strain % ISO 527-2/1A/50

拉伸强度(屈服)
tensile strength MPa ASTM D638

拉伸强度(屈服)
tensile strength MPa ISO 527-2/1A/50

拉伸模量(--)
Tensile modulus MPa ISO 527-2/1A/1

拉伸模量(1% 正割)
Tensile modulus MPa ASTM D638

洛氏硬度(R 级)
Rockwell hardness ASTM D785

邵氏硬度(邵氏 D)
Shore hardness ISO 868

备注

1 一般属性：这些不能被视为规格。

2 0.039 in/min

3 2.0 in/min

4 testbar 80*10*4mm

5 标准 B (120°C/h), 压力1 (10N)

6 标准 B (120°C/h), 载荷2 (50N)