氟橡胶，Tecnoflon® P 757对比氟橡胶，Cri-Line FDA-615-65-THK物性表,价格行情_搜料

牌号信息	Tecnoflon® P 757 物性表氟橡胶 & 比利时索尔维指导价格：暂无塑料库存：缺货	Cri-Line FDA-615-65-THK 物性表氟橡胶 & 美国Cri-Tech 指导价格：暂无塑料库存：缺货
牌号简介	TECNOFLON® P 757 是一种中等粘度、中等含氟量（67%）、过氧化物可硫化含氟弹性体。具有优异的耐受各种化学物质和优异的加工性能、理想的压缩形变率及低温下良好的柔韧性。 Tecnoflon® P 757可以通过有机过氧化物和助剂进行交联。 Tecnoflon® P 757的一些基本特性包括： -后固化率低 -优异的模内流动性 -不会造成模内结垢 -出色的脱模性能 -良好的耐化学性 -良好的应力释放性能 --良好的金属结合力 --良好的低温性能 Tecnoflon® P 757 可用于模压、注塑和传递模塑成型轴密封件、阀密封件、O型环、垫圈及其它具有优异耐化学性能的部件。 Tecnoflon® P 757可以与固化系统和其它常规含氟弹性体配混材料混合。混合机械可用双辊研磨机或密炼机。这种材料可以挤塑成软管或型材，也可压延成片材或带材。成品可采用各种橡胶加工方法制备。 TECNOFLON® P 757 is a medium viscosity, medium fluorine (67%), peroxide curable fluoroelastomer. Tecnoflon® P 757 exhibits superior resistance to a wide variety of chemicals, coupled with excellent processability, optimum compression set and good flexibility at low temperatures. Tecnoflon® P 757 can be cross-linked using organic peroxides in conjunction with a coagent. Some of the basic properties of TECNOFLON® P 757 are: Low post cure Superior mold flow Lack of mold fouling Excellent mold release Good chemical resistance Good stress relaxation Good metal bonding Good low temperature performance Tecnoflon® P 757 can be used for compression, injection and transfer molding of shaft seals, valve seals, O-rings, gaskets or any item requiring superior chemical resistance. Tecnoflon® P 757 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.	66%氟共聚物，采用批准用于食品接触的复合成分配制（列出美国FDA 21 CFR 177.2600（c）（4）（1））。FDA化合物也有多种颜色。 66% Fluorine copolymers formulated with compounding ingredients approved for food contact (U.S. FDA 21 CFR 177.2600(c)(4)(1) listed). FDA compounds are also available in a variety of colors.

产品描述
厂家：	比利时索尔维 Solvay	美国Cri-Tech
类别：	氟橡胶氟橡胶	氟橡胶氟橡胶
填料：
用途：	金属粘接,垫圈,管道,传送带修补,低温应用,阀门/阀门部件,混合,密封件,片材,型材
性能特点：	易加工,尺寸稳定性好,可交联,易流动,含脱模剂,耐低温柔性,耐化学性,可粘结性 Excellent Processability,Good Dimensional Stability,Crosslinked,Good liquidity,Good stripping performance,Low temperature toughness,Solvent resistance,Agglomerability	食品接触,共聚物 Food contact compliance,Copolymer
加工条件：	压缩模塑