热塑性聚酯，Hapweld™ 38对比热塑性聚酯，Hapweld™ 39物性表,价格行情_搜料

牌号信息	Hapweld™ 38 物性表热塑性聚酯 & 美国Hapco 指导价格：暂无塑料库存：缺货	Hapweld™ 39 物性表热塑性聚酯 & 美国Hapco 指导价格：暂无塑料库存：缺货
牌号简介	在大多数特点上类似于HaPress 36 A/B、混合比、净度等，而且还具有很快凝胶和固化的能力（凝胶时间，5-10分钟）。可用于与HapWeld 36相同类型的所有应用中，并且应在需要更快凝固或冷固化时使用。在某些应用中，不再需要外来的固定装置、大量的存储或“机架空间”。可用于高产量应用。 Similar in most characteristics to HAPWELD 36 A/B, mix ratio, clarity, etc., but also has the ability to gel and cure very quickly (gel time, 5-10 minutes). May be used in all the same type applications as HAPWELD 36 and should be used when either a faster set or cold cure is required. In some applications, the need for exotic holding fixtures, or large amounts of storage or "rack space", is eliminated. May be used in high production applications.	在大多数特性上与HapWeld 37相似；配合比、稠度、颜色等，但也具有快速固化（77°F下15分钟）的能力，并且在0°F以下的温度下固化。当需要更快的固化（少于1/2小时）或冷固化时，可使用。这种独特的聚合物粘合剂全年用于户外应用；修补水箱、修理阀门和轴、修理水泥或砖、填缝、密封和所有类型的粘合剂应用。固化时间的缩短也使得HapWeld 39非常适合更快、更在线的生产周期。 Similar in most characteristics to HAPWELD 37; mix ratio, consistency, color, etc., but also has the ability to cure fast (15 minutes @ 77° F) and will cure in temperatures as low as 0° F. May be used when either a faster set (less than 1/2 hour) or cold cure are required. This unique polymer adhesive lends itself to outdoor applications year round; patching tanks, repairing valves and shafts, repairing cement or brick, caulking, sealing, and all types of adhesive applications. The decreased cure time also makes HAPWELD 39 ideally suited for faster, in line, production cycles.

产品描述
厂家：	美国Hapco	美国Hapco
类别：	热塑性聚酯热塑性聚酯	热塑性聚酯热塑性聚酯
填料：
用途：	粘合剂,织物,填充应用,维修用途填料	修复材料,纺织应用,室外应用
性能特点：	透光性好,可分散,快速固化,可粘结性 Good Clarity,Machinable,Fast Cure,Agglomerability	机械强度好,低粘度,触变,快速固化 Good Rigidity,Low Viscosity,Thixotropic,Fast Cure
加工条件：