无筋,仅用于配制(不用于注塑),中等粘度。 Unreinforced, For compounding only (not for injection molding), Medium viscosity.
LNP*COLORCOMP*310C是一种基于PBT树脂的无筋化合物。该等级的附加特征是典型的粘度为5000-7000。 LNP* COLORCOMP* 310C is an unreinforced compound based on PBT resin. Added feature of this grade is a typical viscosity of 5000-7000.
产品描述
厂家:
沙特沙伯基础 SABIC
沙特沙伯基础 SABIC
类别:
PBT polybutylene terephthalate
PBT polybutylene terephthalate
填料:
用途:
复合
性能特点:
防火阻燃等级HB HB
加工条件:
化合物挤出
注射成型 Injection Molding
技术参数
物理性能 PHYSICAL
VALOX™ 312 resin
LNP™ COLORCOMP™ 310C compound
单位 UNIT 测试方法 TEST METHOD
吸水率(24hr)
Water absorption rate
%ASTM D570
密度
Density
g/cm³ASTM D792
收缩率(MD)
Shrinkage rate
%
收缩率(MD)
Shrinkage rate
%内部方法
收缩率(TD)
Shrinkage rate
%
收缩率(TD)
Shrinkage rate
%内部方法
熔体表观粘度
Apparent viscosity of melt
Pa·s内部方法
特定体积
Specific volume
cm³/gASTM D792
冲击性能 IMPACT
VALOX™ 312 resin
LNP™ COLORCOMP™ 310C compound
单位 UNIT 测试方法 TEST METHOD
悬臂梁无缺口冲击强度(23℃)
Notched impact strength of cantilever beam
J/mASTM D4812
悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch
J/mASTM D256
落锤冲击(23℃)
Drop hammer impact
JASTM D3029
热性能 THERMAL
VALOX™ 312 resin
LNP™ COLORCOMP™ 310C compound
单位 UNIT 测试方法 TEST METHOD
热变形温度(0.45 MPa,未退火,6.4 mm)
Hot deformation temperature
℃
热变形温度(0.45 MPa,未退火,6.4 mm)
Hot deformation temperature
℃ASTM D648
热变形温度(1.8 MPa,未退火,6.4 mm)
Hot deformation temperature
℃
热变形温度(1.8 MPa,未退火,6.4 mm)
Hot deformation temperature
℃ASTM D648
相对温度指数(冲击机械性能)
Relative temperature index
℃UL 746
相对温度指数(电气性能)
Relative temperature index
℃UL 746
线性热膨胀系数(-40 到 40℃)
Linear coefficient of thermal expansion
cm/cm/℃
线性热膨胀系数(-40 到 40℃)
Linear coefficient of thermal expansion
cm/cm/℃ASTM E831
线性热膨胀系数(60 到 138℃)
Linear coefficient of thermal expansion
cm/cm/℃
线性热膨胀系数(60 到 138℃)
Linear coefficient of thermal expansion
cm/cm/℃ASTM E831
线性热膨胀系数(MD)
Linear coefficient of thermal expansion
ASTM E831
线性热膨胀系数(MD)
Linear coefficient of thermal expansion
ASTM E831
电气性能 ELECTRICAL
VALOX™ 312 resin
LNP™ COLORCOMP™ 310C compound
单位 UNIT 测试方法 TEST METHOD